* Go back to db for head and header_head
* Use batch consistently for db access
* Pass active txhashset and batch in the ctx
* Only update head in db if total work increases
* Only updated header_head if total work (on header chain) increases
* Allow TLS for Wallet APIs
This PR adds an optional support of TLS for wallet APIs. Only PKCS12 format is supported, will address .pem support in next PR and provide some documentation.
Address #1425
* Add api_secret
* Add to base64 method
* Add basic auth in API
* Add Basic Auth to owner API
* Add flag to enable disable basic auth
* Add .api_secret file
* Move Proof and Difficulty types to pow module. Difficulty scaling calculation.
* Diffculty scaling and size shift for 2nd PoW
* Backport e7eb26ee
* Test compilation fixes
* Scaling only need to go one way, as @tromp pointed out
* config file can now be generated by executable
* rustfmt
* remove now-unnecessary config defaults test
* set up paths and config file creation in user's home directory
* rustfmt
* remove default grin.toml
* add grin configuration command to spit out config file
* Split configuration into wallet and server
* rustfmt
* Restore logging to wallet configurations
* rustfmt
Header sync used to run when complete (right count of blocks
received) or every 10 sec regardless. Sometimes 10 secs is not
enough, especially when a big batch of blocks bodies is arriving
at the same time.
This tweaks the time-based heuristic just a bit to only ask for
headers when stalled, meaning that the header head has not
*progressed* for 10 seconds.
* Fix bad header sync timeout logic
* Improve stability of fast sync test
Adds regular pings so that the 2 test servers know each others'
heights (necessary to find most work peer). Stop mining on the
first server once the 2nd kicks in. Avoids chasing a fast moving
target on Cuckoo10.
* Remove now unnecessary txhashset write lock
* Ring buffer of hashes the chain has already processed
* Specifically report too old blocks as peer should be banned
* Move sync check for block relay, clean TODO
* No use processing transactions when syncing
* Ignore blocks older than horizon in pruning nodes
* A new sync status enum encapsulated in a state struct allows tracking of where sync is at. Leveraging it in the TUI to provide more helpful messages.
* Percentage progression for most sync steps
* Added sizeshift to proof of work and encoding as VLQ
* Fix some loose ends to get things to compile
* Rename sizehift to min_sizeshift
* Pipeline checks for PoW Cuckoo Cycle size shift and adjustment
factor before difficulty comparison.
* Working delta+VLQ encoding of u64 PoW, unfortunately still a
little larger than u32, at least for Cuckoo30.
* Changed binary encoding of proof of work to a sequence of exact
compact bit representation of each nonce. Somewhat simpler,
shorter and matches the data to be hashed.
* Few fixes based on @tromp feedback:
* Max nonce is 2^(N-1)
* Need a separate constant for reference sizeshift
* Cuckoo implementation now conserves sizeshift. Test providing a
block at higher sizeshift.
* Last small overflow protection
* Migrate main node store to LMDB
In preparation to using LMDB as a wallet database, migrate the
node db. There's no point in having 2 key-value stores.
In addition LMDB provides a few advantages as a node db, namely a
much faster build (compared to RocksDb), lesser dependencies and
transactions.
* Migrated p2p store to lmdb, stuff compiles
* More fixes, chain tests starting to pass
* Fixed txhashset rollback messing with block save and general batch delimitation. Chain tests passing.
* rustfmt
* LMDB max map size of 10MB isn't really workable. Half TB seems reasonable.
* Fix wallet tests
* Rather crucial commit was missing
* rustfmt
* Fixing new merged tests following lmdb changes
* rustfmt
* * Make txhashset validation read-only on fast sync to avoid having
a really long open transaction.
* Fix deadlock in new block processing, batch should always be
created within a txhashset lock (when they interact).
* Comment about batch and txhashset interlacing
* Fix store tests to use batch
* Externalize wallet config and seed
* Converted direct read access to file outputs map to an iterator
* Cleaned up and simplified wallet Backend trait:
* No more direct mutable access to internal structures (HashMap)
* Batch interface for all writes
* Remove unneeded read wrapper (read_wallet)
* rustfmt
* First (incomplete) pass at wallet LMDB backend
* Progressing on lmdb backent iml
* Added batch impl for LMDB wallet backend. Pretty much done with it, but not sure how to deal with commit (owned).
* rustfmt
* Wrapping LMDB batch around a refcell to work around borrow rules
* Compilation up to grin chain
Small refactoring of one folder, if it makes sense I could extend the scope.
* Remove some cloning (real and just verbosity in the code)
* Naming conventions like to/into*
* Some Clippy's suggestions
I found that we don't use field init shorthand syntax, so I didn't touch this part, was it discussed before?
* verify a tx like we verify a block (experimental)
* first minimal_pool test up and running but not testing what we need to
* rework tx_pool validation to use txhashset extension
* minimal tx pool wired up but rough
* works locally (rough statew though)
delete "legacy" pool and graph code
* rework the new pool into TransactionPool and Pool impls
* rework pool to store pool entries
with associated timer and source etc.
* all_transactions
* extra_txs so we can validate stempool against existing txpool
* rework reconcile_block
* txhashset apply_raw_tx can now rewind to a checkpoint (prev raw tx)
* wip - txhashset tx tests
* more flexible rewind on MMRs
* add tests to cover apply_raw_txs on txhashset extension
* add_to_stempool and add_to_txpool
* deaggregate multi kernel tx when adding to txpoool
* handle freshness in stempool
handle propagation of stempool txs via dandelion monitor
* patience timer and fluff if we cannot propagate
to next relay
* aggregate and fluff stempool is we have no relay
* refactor coinbase maturity
* rewrote basic tx pool tests to use a real txhashset via chain adapter
* rework dandelion monitor to reflect recent discussion
works locally but needs a cleanup
* refactor dandelion_monitor - split out phases
* more pool test coverage
* remove old test code from pool (still wip)
* block_building and block_reconciliation tests
* tracked down chain test failure...
* fix test_coinbase_maturity
* dandelion_monitor now runs...
* refactor dandelion config, shared across p2p and pool components
* fix pool tests with new config
* fix p2p tests
* rework tx pool to deal with duplicate commitments (testnet2 limitation)
* cleanup and address some PR feedback
* add big comment about pre_tx...
* Beginning to remove in-process miner
* rustfmt
* rustfmt
* rustfmt
* rustfmt
* remove pow crate and put remnants into core
* rustfmt
* fix test compilation in core and chain
* rustfmt
* Updating server tests to use test miner
* rustfmt
* rustfmt
* remove pow from test matrix
* adding basic stratum stats to TUI
* run stratum server at all times, and halt messages while syncing
* fix core tests
* add ability to run internal test miner for cuckoo 16 testing
* modify build instructions
* commit
* rustfmt
* only fast sync once
then treat as full sync
* commit
* add some debug logging so we can track progress when verifying rangeproofs
* rustfmt
* Fix issue where we have no metadata for a block (#938)
when restarting node before initial sync completed
* Avoid double-locking on add eviction. Fixes#936
* Fix 33c5a983
* Add support for DNS Seed (#940)
* Add support for DNS Seed
* Add port
* Add seed.grin-tech.org
* Remove duplicate IPs
* minimal stratum server
* Modifications for review comments. Move stratum test into its own file, move get_block() into its own rust module, use pool and chain only rather than the entire Miner object
* rustfmt
* cleanup
* cleanup
* Introduce extending_readonly to simplify a forcing and cancelling rollbacks (#945)
readonly views of the txhashset
* Add DNS Seed and make DNSSeed default (#942)
* Add dns seed seeding type
* Add grin-seed.owncrypto.de and make DNSSeed default
* Add email address for each DNS Seed
* [WIP] Core PMMR and API updates to support wallet restore (#950)
* update pmmr to get batch of elements by insertion position
* update pmmr to get batch of elements by insertion position
* add api + chain calls to get traversed outputs back out
* add api + chain calls to get traversed outputs back out
* first pass getting wallet restore to work again with updated utxo-walking api
* Update simulation.md
* Fix Bus Error (core dumped) when validating fast sync txhashset (#956)
This PR fixes#953 by introducing a lock for txhashet_write. It's not enough
to synchronize access to in memory data, files also needs to be protected, so
a general txhashset lock was introduced.
* refactor grin crate into separate modules (#955)
* Add total kernel offset to block api (#954)
* minimal stratum server
* Modifications for review comments. Move stratum test into its own file, move get_block() into its own rust module, use pool and chain only rather than the entire Miner object
* rustfmt
* cleanup
* cleanup
* Merge with grin_grin -> servers code reorg
* Merge with grin_grin -> servers code reorg
* add stratum server stats