Files
grin-node/util/src/logger.rs
T
Yeastplume 5cb8025ddd [1.1.0] Merge master into 1.1.0 (#2720)
* cleanup legacy "3 dot" check (#2625)

* Allow to peers behind NAT to get up to preferred_max connections (#2543)

Allow to peers behind NAT to get up to preffered_max connections

If peer has only outbound connections it's mot likely behind NAT and we should not stop it from getting more outbound connections

* Reduce usage of unwrap in p2p crate (#2627)

Also change store crate a bit

* Simplify (and fix) output_pos cleanup during chain compaction (#2609)

* expose leaf pos iterator
use it for various things in txhashset when iterating over outputs

* fix

* cleanup

* rebuild output_pos index (and clear it out first) when compacting the chain

* fixup tests

* refactor to match on (output, proof) tuple

* add comments to compact() to explain what is going on.

* get rid of some boxing around the leaf_set iterator

* cleanup

* [docs] Add switch commitment documentation (#2526)

* remove references to no-longer existing switch commitment hash

(as switch commitments were removed in ca8447f3bd
and moved into the blinding factor of the Pedersen Commitment)

* some rewording (points vs curves) and fix of small formatting issues

* Add switch commitment documentation

* [docs] Documents in grin repo had translated in Korean.  (#2604)

*  Start to M/W intro translate in Korean
*  translate in Korean
*  add korean translation  on intro
* table_of_content.md translate in Korean.
*  table_of_content_KR.md finish translate in Korean, start to translate State_KR.md
*  add state_KR.md & commit some translation in State_KR.md
*  WIP stat_KR.md translation
*  add build_KR.md && stratum_KR.md
*  finish translate stratum_KR.md & table_of_content_KR.md
*  rename intro.KR.md to intro_KR.md
*  add intro_KR.md file path each language's  intro.md
*  add Korean translation file path to stratum.md & table_of_contents.md
*  fix difference with grin/master

* Fix TxHashSet file filter for Windows. (#2641)

* Fix TxHashSet file filter for Windows.

* rustfmt

* Updating regexp

* Adding in test case

* Display the current download rate rather than the average when syncing the chain (#2633)

* When syncing the chain, calculate the displayed download speed using the current rate from the most recent iteration, rather than the average download speed from the entire syncing process.

* Replace the explicitly ignored variables in the pattern with an implicit ignore

* remove root = true from editorconfig (#2655)

* Add Medium post to intro (#2654)

Spoke to @yeastplume who agreed it makes sense to add the "Grin Transactions Explained, Step-by-Step" Medium post to intro.md

Open for suggestions on a better location.

* add a new configure item for log_max_files (#2601)

* add a new configure item for log_max_files

* rustfmt

* use a constant instead of multiple 32

* rustfmt

* Fix the build warning of deprecated trim_right_matches (#2662)

* [DOC] state.md, build.md and chain directory documents translate in Korean.  (#2649)

*  add md files for translation.

*  start to translation fast-sync, code_structure. add file build_KR.md, states_KR.md

* add dandelion_KR.md && simulation_KR.md for Korean translation.

*  add md files for translation.

*  start to translation fast-sync, code_structure. add file build_KR.md, states_KR.md

* add dandelion_KR.md && simulation_KR.md for Korean translation.

* remove some useless md files for translation. this is rearrange set up translation order.

*  add dot end of sentence & translate build.md in korean

*  remove fast-sync_KR.md

*  finish build_KR.md translation

*  finish build_KR.md translation

*  finish translation state_KR.md & add phrase in state.md to move other language md file

* translate blocks_and_headers.md && chain_sync.md in Korean

*  add . in chain_sync.md , translation finished in doc/chain dir.

* fix some miss typos

* Api documentation fixes (#2646)

* Fix the API documentation for Chain Validate (v1/chain/validate).  It was documented as a POST, but it is actually a GET request, which can be seen in its handler ChainValidationHandler
* Update the API V1 route list response to include the headers and merkleproof routes.  Also clarify that for the chain/outputs route you must specify either byids or byheight to select outputs.

* refactor(ci): reorganize CI related code (#2658)

Break-down the CI related code into smaller more maintainable pieces.

* Specify grin or nanogrins in API docs where applicable (#2642)

* Set Content-Type in API client (#2680)

* Reduce number of unwraps in chain crate (#2679)

* fix: the restart of state sync doesn't work sometimes (#2687)

* let check_txhashset_needed return true on abnormal case (#2684)

*  Reduce number of unwwaps in api crate  (#2681)

* Reduce number of unwwaps in api crate

* Format use section

* Small QoL improvements for wallet developers (#2651)

* Small changes for wallet devs

* Move create_nonce into Keychain trait

* Replace match by map_err

* Add flag to Slate to skip fee check

* Fix secp dependency

* Remove check_fee flag in Slate

* Add Japanese edition of build.md (#2697)

* catch the panic to avoid peer thread quit early (#2686)

* catch the panic to avoid peer thread quit before taking the chance to ban
* move catch wrapper logic down into the util crate
* log the panic info
* keep txhashset.rs untouched
* remove a warning

* [DOC] dandelion.md, simulation.md ,fast-sync.md and pruning.md documents translate in Korean. (#2678)

* Show response code in API client error message (#2683)

It's hard to investigate what happens when an API client error is
printed out

* Add some better logging for get_outputs_by_id failure states (#2705)

* Switch commitment doc fixes (#2645)

Fix some typos and remove the use of parentheses in a
couple of places to make the reading flow a bit better.

* docs: update/add new README.md badges (#2708)

Replace existing badges with SVG counterparts and add a bunch of new ones.

* Update intro.md (#2702)

Add mention of censoring attack prevented by range proofs

* use sandbox folder for txhashset validation on state sync (#2685)

* use sandbox folder for txhashset validation on state sync

* rustfmt

* use temp directory as the sandbox instead actual db_root txhashset dir

* rustfmt

* move txhashset overwrite to the end of full validation

* fix travis-ci test

* rustfmt

* fix: hashset have 2 folders including txhashset and header

* rustfmt

* 
(1)switch to rebuild_header_mmr instead of copy the sandbox header mmr 
(2)lock txhashset when overwriting and opening and rebuild

* minor improve on sandbox_dir

* add Japanese edition of state.md (#2703)

* Attempt to fix broken TUI locale (#2713)

Can confirm that on the same machine 1.0.2 TUI looks great and is broken on
the current master. Bump of `cursive` version fixed it for me.
Fixes #2676

* clean the header folder in sandbox (#2716)

* forgot to clean the header folder in sandbox in #2685

* Reduce number of unwraps in servers crate (#2707)

It doesn't include stratum server which is sufficiently changed in 1.1
branch and adapters, which is big enough for a separate PR.

* rustfmt

* change version to beta
2019-04-01 11:47:48 +01:00

278 lines
7.6 KiB
Rust

// Copyright 2018 The Grin Developers
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//! Logging wrapper to be used throughout all crates in the workspace
use crate::Mutex;
use std::ops::Deref;
use backtrace::Backtrace;
use std::{panic, thread};
use crate::types::{self, LogLevel, LoggingConfig};
use log::{LevelFilter, Record};
use log4rs;
use log4rs::append::console::ConsoleAppender;
use log4rs::append::file::FileAppender;
use log4rs::append::rolling_file::{
policy::compound::roll::fixed_window::FixedWindowRoller,
policy::compound::trigger::size::SizeTrigger, policy::compound::CompoundPolicy,
RollingFileAppender,
};
use log4rs::append::Append;
use log4rs::config::{Appender, Config, Root};
use log4rs::encode::pattern::PatternEncoder;
use log4rs::filter::{threshold::ThresholdFilter, Filter, Response};
fn convert_log_level(in_level: &LogLevel) -> LevelFilter {
match *in_level {
LogLevel::Info => LevelFilter::Info,
LogLevel::Warning => LevelFilter::Warn,
LogLevel::Debug => LevelFilter::Debug,
LogLevel::Trace => LevelFilter::Trace,
LogLevel::Error => LevelFilter::Error,
}
}
lazy_static! {
/// Flag to observe whether logging was explicitly initialised (don't output otherwise)
static ref WAS_INIT: Mutex<bool> = Mutex::new(false);
/// Flag to observe whether tui is running, and we therefore don't want to attempt to write
/// panics to stdout
static ref TUI_RUNNING: Mutex<bool> = Mutex::new(false);
/// Static Logging configuration, should only be set once, before first logging call
static ref LOGGING_CONFIG: Mutex<LoggingConfig> = Mutex::new(LoggingConfig::default());
}
const LOGGING_PATTERN: &str = "{d(%Y%m%d %H:%M:%S%.3f)} {h({l})} {M} - {m}{n}";
/// This filter is rejecting messages that doesn't start with "grin"
/// in order to save log space for only Grin-related records
#[derive(Debug)]
struct GrinFilter;
impl Filter for GrinFilter {
fn filter(&self, record: &Record<'_>) -> Response {
if let Some(module_path) = record.module_path() {
if module_path.starts_with("grin") {
return Response::Neutral;
}
}
Response::Reject
}
}
/// Initialize the logger with the given configuration
pub fn init_logger(config: Option<LoggingConfig>) {
if let Some(c) = config {
let tui_running = c.tui_running.unwrap_or(false);
if tui_running {
let mut tui_running_ref = TUI_RUNNING.lock();
*tui_running_ref = true;
}
// Save current logging configuration
let mut config_ref = LOGGING_CONFIG.lock();
*config_ref = c.clone();
let level_stdout = convert_log_level(&c.stdout_log_level);
let level_file = convert_log_level(&c.file_log_level);
let level_minimum;
// Determine minimum logging level for Root logger
if level_stdout > level_file {
level_minimum = level_stdout;
} else {
level_minimum = level_file;
}
// Start logger
let stdout = ConsoleAppender::builder()
.encoder(Box::new(PatternEncoder::new(&LOGGING_PATTERN)))
.build();
let mut root = Root::builder();
let mut appenders = vec![];
if c.log_to_stdout && !tui_running {
let filter = Box::new(ThresholdFilter::new(level_stdout));
appenders.push(
Appender::builder()
.filter(filter)
.filter(Box::new(GrinFilter))
.build("stdout", Box::new(stdout)),
);
root = root.appender("stdout");
}
if c.log_to_file {
// If maximum log size is specified, use rolling file appender
// or use basic one otherwise
let filter = Box::new(ThresholdFilter::new(level_file));
let file: Box<dyn Append> = {
if let Some(size) = c.log_max_size {
let count = c
.log_max_files
.unwrap_or_else(|| types::DEFAULT_ROTATE_LOG_FILES);
let roller = FixedWindowRoller::builder()
.build(&format!("{}.{{}}.gz", c.log_file_path), count)
.unwrap();
let trigger = SizeTrigger::new(size);
let policy = CompoundPolicy::new(Box::new(trigger), Box::new(roller));
Box::new(
RollingFileAppender::builder()
.append(c.log_file_append)
.encoder(Box::new(PatternEncoder::new(&LOGGING_PATTERN)))
.build(c.log_file_path, Box::new(policy))
.expect("Failed to create logfile"),
)
} else {
Box::new(
FileAppender::builder()
.append(c.log_file_append)
.encoder(Box::new(PatternEncoder::new(&LOGGING_PATTERN)))
.build(c.log_file_path)
.expect("Failed to create logfile"),
)
}
};
appenders.push(
Appender::builder()
.filter(filter)
.filter(Box::new(GrinFilter))
.build("file", file),
);
root = root.appender("file");
}
let config = Config::builder()
.appenders(appenders)
.build(root.build(level_minimum))
.unwrap();
let _ = log4rs::init_config(config).unwrap();
info!(
"log4rs is initialized, file level: {:?}, stdout level: {:?}, min. level: {:?}",
level_file, level_stdout, level_minimum
);
// Mark logger as initialized
let mut was_init_ref = WAS_INIT.lock();
*was_init_ref = true;
}
send_panic_to_log();
}
/// Initializes the logger for unit and integration tests
pub fn init_test_logger() {
let mut was_init_ref = WAS_INIT.lock();
if *was_init_ref.deref() {
return;
}
let mut logger = LoggingConfig::default();
logger.log_to_file = false;
logger.stdout_log_level = LogLevel::Debug;
// Save current logging configuration
let mut config_ref = LOGGING_CONFIG.lock();
*config_ref = logger;
let level_stdout = convert_log_level(&config_ref.stdout_log_level);
let level_minimum = level_stdout; // minimum logging level for Root logger
// Start logger
let stdout = ConsoleAppender::builder()
.encoder(Box::new(PatternEncoder::default()))
.build();
let mut root = Root::builder();
let mut appenders = vec![];
{
let filter = Box::new(ThresholdFilter::new(level_stdout));
appenders.push(
Appender::builder()
.filter(filter)
.filter(Box::new(GrinFilter))
.build("stdout", Box::new(stdout)),
);
root = root.appender("stdout");
}
let config = Config::builder()
.appenders(appenders)
.build(root.build(level_minimum))
.unwrap();
let _ = log4rs::init_config(config).unwrap();
info!(
"log4rs is initialized, stdout level: {:?}, min. level: {:?}",
level_stdout, level_minimum
);
*was_init_ref = true;
}
/// hook to send panics to logs as well as stderr
fn send_panic_to_log() {
panic::set_hook(Box::new(|info| {
let backtrace = Backtrace::new();
let thread = thread::current();
let thread = thread.name().unwrap_or("unnamed");
let msg = match info.payload().downcast_ref::<&'static str>() {
Some(s) => *s,
None => match info.payload().downcast_ref::<String>() {
Some(s) => &**s,
None => "Box<Any>",
},
};
match info.location() {
Some(location) => {
error!(
"\nthread '{}' panicked at '{}': {}:{}{:?}\n\n",
thread,
msg,
location.file(),
location.line(),
backtrace
);
}
None => error!("thread '{}' panicked at '{}'{:?}", thread, msg, backtrace),
}
//also print to stderr
let tui_running = TUI_RUNNING.lock().clone();
if !tui_running {
let config = LOGGING_CONFIG.lock();
eprintln!(
"Thread '{}' panicked with message:\n\"{}\"\nSee {} for further details.",
thread, msg, config.log_file_path
);
}
}));
}