* Introduced rewarding_interval_nonce to contract state
* Queries for ibid.
* Mixnode demanded set size
* Routes for obtaining demanded/active mixnode sets
* Testing only demanded nodes
* Typo
* Initial state
* Feature-locking unused imports
* Generating pseudorandom (with deterministic seed) demanded mixnodes set
* cargo fmt
* Fixed tauri state
* Renamed network monitor address to the rewarding validator
* [ci skip] Generate TS types
* Notice for the future
* Transactions to begin/finish mixnode rewarding + double rewarding protection
* Validator API using new contract calls
* Removed dead code from an old experiment
* [ci skip] Generate TS types
* Removed unused import
* Renamed 'demanded' set to 'rewarded' set
* Some renaming action
* [ci skip] Generate TS types
* Fixed post-merge dependency issue in tests
* Post merge test fix
Co-authored-by: jstuczyn <jstuczyn@users.noreply.github.com>
* Remove check for bandwidth for incoming packets
We should only accunt for packets that the client inputs to the mixnet
* Introduce BandwidthController for both types of bandwidth creds
* Add some non-coconut token bandwidth handling
* Use thiserror for gateway-client lib
* Add error handling
* Unable to build for wasm for now
* Fix wasm strange error
* Disable non-coconut credentials for wasm client
* Check for status and throw the error up
* Send encrypted token cred from client
* Gateway receive message and signature validation
* Put the correct amount of tokens that were burned
* [ci skip] Generate TS types
* Eth endpoint and secret key as config parameters
* Add eth_endpoint config argument for gateway
* Update test as well
* Separate panicable code from the safe one
* Move some bandwidth controller panics up the call stack
* Save contract corresponding to the eth endpoint
* Fix template
* Pass the web3 interface as well
* Made event reads possible in gateway
* Add checks for event data
* Cosmos contract for double spending prevention
* Add workflow for the new contract
* Add validator rest URL to config
* Rename eth_events to erc20_bridge
* Pass cosmos mnemonic as well, and put the nymd client in ERC20Bridge
* Call cosmos contract for final verification
* Ask for config parameters in cli
* Fix various stuff
* Increase timeout to allow gateway to check the two chains
* Put some logs for the new flow
* Set consumed bandwidth invariantly of coconut feature
* Fix clippy error
* Add non-coconut checks
* Use 2018 rust instead of 2021
* More verbose nymd error
* Explicitly specify TOKENS_TO_BURN constant
* Put eth burn function in a constant
* Replace to_vec & append with iter & chain
* Test for (de)serialization of TokenCredential
* Minor rename
* Separate credential creation from bandwidth claiming
* Switch from panics to errors when claiming coconut bandwidth
* Another append changed to chain
* Update QA cosmos contract address
* Simplify build/test/clippy separation on coconut feature
* Fix bad features arg positioning
* Use the start_after in cosmos contract query
* Set a limit in line with a range on cosmos queries
* Added unit tests for new cosmos contract
* Fix bandwidth_remaining comparation
* Get remaining bandwidth from gateway
* Add contract build flag
* Add a useful info log
* Use a more robust eth depth for release builds
* Include recipt logs in error message
* Fix clippy for tests
* Use Arc instead of clone
* Rename as_bytes to to_bytes
* Make signature verification in contract more verbose
* Missed rename of paging constant
* Fix gateway start with coconut enabled
* Rename function to claim_token
* Simplify nymd client setup
* Check with block buffer on gateway as well
* Update comment of double spending protection
* Correct contract address
* Backup the keypairs used for buying tokens, in case of error cases
* Don't take any chances with the gateway timeout
* [ci skip] Generate TS types
* Updated cosmos contract to latest QA address
* Add cli options for eth
* Update network monitor timeout value as well
Co-authored-by: neacsu <neacsu@users.noreply.github.com>
* Removed separated ipv4 and ipv6 testing
* Testing network using chosen core nodes
This should have probably been like 20 independent commits... sorry...
* SQL migrations for updated schema
* SQL updates
* Using absolute uptime directly
* New uptime calculations
* Config entries, more DB work, some cleanup
* Additional API query routes
* More SQL and API work
* Changed `_` to `-` in new routes
* Removed good topology from config
* Fixed gateways reader yield condition
* Initial gateways pinger
* Minor cleanup and logging level decreases
* Missing trait derivations
* Further logging adjustments
* Unused commented out import
* Claiming additional bandwidth in coconut feature when low
* Fixed build with coconut feature
* Minimum number of test routes
* Making beta/nightly clippy happier
* Additional methods on nymd client
* Checking for time out errors
* Attempting retransmission on suspected time out
* Don't report error if tx is a mempool duplicate
* 'Coconut' feature in gateway
* Enabled coconut feature in gateway-requests
* Native client coconut feature
* Ibid for socks5 client
* Ibid for wasm client
* Coconut feature flag for validator-api
* Added coconut feature flag to our CI
* build.yml typo
* Continue on windows errors
* Missing quote
* Another typo in build.yml
* Reclaiming disk space when building for windows on CI
* Remove migration code
* Added function to iterate over delegation of variable type
* Add unit tests
* Refactored some naming and reused mix/gateway functionality
* Borrow bucket instead of move
* Linked with existing delegations function
* Migration of left-over delegations
* Remove unused imports
* Put a gateway test as well, next to the mix one
* Expose queries for all delegations
* Change break point
* Added client side calls to the new queries
* Fix clippy
* Added pagination and read check tests
* Fix gateway test from the last commit
* Test functions for (de)serialization of identity and owner (in)to storage keys
* Add delegation function unit test
* Feature guard import
* Changed UnpackedDelegation from type to struct
* Remove mutable parameter and put start_after in returned value
* Made all delegations into iterator for OOM safety
* Fix clippy
* Add test for delegations iterator size in memory
* Change map with if let for ease of read
* Use DENOM instead of hardcoded value
* Sqlx struct stub
* Initial schema
* Initial error enum
* Managed for persisted shared keys
* Initial inbox manager
* Comments
* Using new database in clients handler
* Extending gateway storage API
* tokio::main + placeholder values
* Removed old client store
* Simplified logic of async packet processing
* Renamed table + not null restriction
* BandwidthManager
* Removed sled dependency
* Using centralised storage for bandwidth
* Dead code removal
* WIP connection_handler split and simplification
Maybe it doesn't look like it right now, but once completed it will remove bunch of redundant checks for Nones etc
* Further more explicit clients handler split
* Minor cleanup
* Temporary store for active client handles
* Fixed error types
* Error trait on iv and encrypted address
* Authentication and registration moved to the handler
* Removal of clients handler
* Further logic simplification + returned explicit bandwidth values
* Further cleanup and comments
* Updated config with relevant changes
* Basic bandwidth tracking in client
* FreshHandle doc comments + fixed stagger issue
* Removed side-effects from .map
* More doc comments
* Database migration on build
* Increased default claimed bandwidth
* Renaming
* Fixed client determining available bandwidth
* Removed dead sql table that might be used in the future
* Windows workaround
* Comment
* Return error rather than cap credential
* Added separate gateway active set size
* Grabbing contract state
* Defined PartialOrd on MixnodeBond and GatewayBond
* Some initial stub for active set
* Unit tests for mixnode and gateway bond partialord implementation
* Obtaining active sets
* Active nodes routes
* Additional methods on validator client
* Added state migration
* Feature locking unused import
* Fixed State test fixture
* Included block height for partial_ord
* Missing post-merge imports
* api on the client for active nodes
* Native/socks5/wasm clients using active nodes
* Rewarding only active nodes
* Updated validator client StateParams definition
* Gateway active set size
* Contract migration update
* Cargo fmt
* Updated TauriStateParams
* [ci skip] Generate TS types
Co-authored-by: jstuczyn <jstuczyn@users.noreply.github.com>
* Calculating gas fees
* Ability to set custom fees
* Added extra test
* Removed commented code
* Moved all msg types to common contract crate
* Temporarily disabling get_tx method
* Finishing up nymd client API
* Comment fix
* Remaining fee values
* Some cleanup
* Removed needless borrow
* Fixed imports in contract tests
* Moved error types around
* New ValidatorClient
* Experiment with new type of defaults
* Removed dead module
* Dealt with unwrap
* Migrated mixnode to use new validator client
* Migrated gateway to use new validator client
* Mixnode and gateway adjustments
* More exported defaults
* Clients using new validator client
* Fixed mixnode upgrade
* Moved default values to a new crate
* Changed behaviour of validator client features
* Migrated basic functions of validator api
* Updated config + fixed startup
* Fixed wasm client build
* Integration with the explorer api
* Removed tokio dev dependency
* Needless borrow
* Fixex wasm client build
* Fixed tauri client build
* Needless borrows
* New tables for rewarding
* Updated cosmos-sdk version
* Removed reward-specific node status routes
* New rewarding-specific config entries
* Additional network defaults
* Initial periodic rewards from validator api
* Replaced print with log
* Filtering nodes with uptime > 0
* Additional failure logging statements
* Fixed operation ordering
* Adjusted next rewarding epoch determination
* Modified rewarding behaviour to keep track of rewarding in progress
* Improved error message on config load failure
* Additional log statement
* Adjusted rewarding gas limit calculation
* Made naming slightly more consistent
* Fixed incorrect parentheses placement
* Fixed fee calculation
* Cargo fmt
* Removed failed merge artifacts
* Introduced comment for any future reward modification
* typos
* Helper functions for the future
* Making @mfahampshire 's life easier
* Redesigned epoch + rewarding skipped epochs (if possible)
* Removed old merge artifacts
* Naming consistency
* Constraining arguments
* Removed unnecessary if branch
* Ignore monitor check for current epoch
* Additional checks for current epoch data
* Monitor threshold check
* cargo fmt
* Fixed post-merge issues in transactions.rs
* Update hmac and blake3
* Remain paranoid for `0.*` crates
* Most paranoid versions :)
* Updated aes and using published version of blake3
Co-authored-by: Jędrzej Stuczyński <jedrzej.stuczynski@gmail.com>
* Set actual value for bandwidth
Also put it as a public attribute, such that it can be actively used
by the credential consumer
* Switch from sending Attribute structs to sending the actual attribute bytes over the wire
* Add atomic bandwidth value to gateway
* Consume bandwidth based on the mix packet size
* Use Bandwidth struct for specific functionality
* Move bandwidth code outside the dependency path of wasm client
* Use u64 instead of AtomicU64, as the handling is not parallel
* Add block_height to MixNode/GatewayBond
* Reward based on blockstamp of bonded node or of delegation
* Add specific tests
* Add migration code
* Apply doc nit
* Add RawDelegationData
* Fix current tests for the new stored data
* Added migration commit. Will be reverted after doing the migration
* New tests for block height
* Use current blockstamp instead of 24h old one
* Put _alot_ of migration stuff in the migrate function scope
* Call perform_initial_authentication instead of register in clients
* Refactor the register/authenticate functions a bit
* Introduce Bandwidth request type
* Add encryption layer to cred
* Remove cred pass and check from handshake
* Replaced unreachable! with error
* Changed decrypt_tagged signature to not take mutable ownership of data
* Put handle_bandwidth work inside a function
* Add check before unwrap
* Remove unnecessary async
* Decouple bandwidth credential from authentication
* Use new_error for ServerResponse:Error
* Send a fresh IV each time the BandwidthCredential request is sent
* Remove unwrap of bincode::serialize
* Add comment regarding Bandwidth response
* Remove _mut from naming
* Leave Debug trait alone, as the initial error doesn't reproduce anymore
* Pass iv as Vec<u8> instead of base58 string
* Renamed AuthenticationIV to IV, as it is now used for more the just authentication
* Did some IV refactorization
* Introduce reverse delegation bucket
* Add client command
* Fix clippy error
* Added tests in queries
* Add tests in transactions
* Migration code. Will be reverted after it's called on testnet
* Replace unwrap with expect
* Move some test code in the right file...
... to remove unnecessary auxiliary function.
* Reduce the scope to migration auxiliary functions
* Rename everything from [node]reverse to reverse[node]
* Fix fmt
* Calculating gas fees
* Ability to set custom fees
* Added extra test
* Removed commented code
* Moved all msg types to common contract crate
* Temporarily disabling get_tx method
* Finishing up nymd client API
* Comment fix
* Remaining fee values
* Some cleanup
* Removed needless borrow
* Fixed imports in contract tests
* Moved error types around
* New ValidatorClient
* Experiment with new type of defaults
* Removed dead module
* Dealt with unwrap
* Migrated mixnode to use new validator client
* Migrated gateway to use new validator client
* Mixnode and gateway adjustments
* More exported defaults
* Clients using new validator client
* Fixed mixnode upgrade
* Moved default values to a new crate
* Changed behaviour of validator client features
* Migrated basic functions of validator api
* Updated config + fixed startup
* Fixed wasm client build
* Integration with the explorer api
* Removed tokio dev dependency
* Needless borrow
* Fixex wasm client build
* Fixed tauri client build
* Needless borrows
* Fixed client upgrade print
* Removed redundant comments
* Made note on aggregated verification key into a doc comment
* Removed mixnet contract references from verloc
* Modified default validators structure
* Reformatted validator-api Cargo.toml file
* Removed commented code
* Made the doc comment example a no-run
* Fixed a upgrade print... again
* Adjusted the doc example
* Removed unused import
* Rename storage read functions for bond reward rates
* Add reward values per epoch in State
Calculate delegation rewards per epoch for mixnodes and gateways, which
are used when the delegators are rewarded for their stake.
* Migration commit, will be reverted after the testnet contract is updated
* Tiny PR to add stake reward rates and bump version
This is needed so that we can publish the 0.17 version.
* Add the changes to contracts as well
On second thought, update the contract together with the client, and
leave the wallet changes for another PR.
* Rename _stake_ to _delegation_
* Hand coconut issuance off the validator-api
* git to cargo
* Move to own module
* Integrate tauri-client, extract common interface
* cargo fmt
* Ergonomics
* Facelift
* Wrap up tauri client
* Set up publish
* Fix fmt
* Install CI dependencies
* Inline deps
* Remove mac deps
* Add dist dir
* Fix beta clippy nag
* Commit some gateway work
* Thread coconut creds through gateway handshake
* Push in progress patch
* Move State from tauri client to coconut interface
* Move get_aggregated_signature from tauri client to coconut interface
* Move prove_credential from tauri client to coconut interface
* Update sphinx version
* Mount coconut routes and manage config file in rocket
* Split default validator endpoint into host and port
* Add init for simple credential initialization
* Fix common gateway client
* Add coconut cred to webassembly client
* Add coconut cred to socks5 client
* Add coconut cred to native client
* Remove direct coconut-rs dependency
* Use only coconut interface in validator api
* Leave validator-api out of workspace and update Cargo.lock
* Fix clippy warnings and update Cargo.lock after rebase
* Switch from attohttpc to reqwest for async gets
This is not only needed for using async requests, but also because attohttpc
causes OpenSSL issues when cross compiling the webassembly client.
* Replace attohttpc with reqwest for puts too
* Make tauri client commands async
* Fix borrow error
* Guard gateway server code from compiling for wasm (client)
* Fix clippy wasm client
* Fix tests
* Fix clippy in tauri client
* Remove commented code
* Update comment of init message
* Remove unnecessary hex dependency
* Replace config argument with key_pair
* Use `trim()` for whitespace removal
* Move verification key query higher up the function calls
* Put KeyPair instead of Config into rocket's managed items
* Re-enable tauri client verify button
* Move verification key up the function calls for prove_credential
* Use consts for verification_key and blind_sign routes of validator-api
* Replace `match` with `map_err`
* Fix typo
* Remove now unnecessary `Clone` derives
... as config is no longer managed by rocket
* Replace `match` with `map_err`
* Make `InternalSignRequest` really internal to validator-api
* Make `with_keypair` live up to its name
* Update Cargo.lock after rebase
* Replace String error with HandshakeError
* Add CoconutInterfaceError to coconut-interface
* Format the new error in tauri client
* Remove from default, as wasm client doesn't build
* Put public key as init argument...
... for the public attributes of the credential
* Use the hash_to_scalar function to make public key into attribute
Use the function from cli-demo-rs from https://github.com/nymtech/coconut
to make the identity public key into a public attribute.
* Replace vector with array for InitMessage
As we know beforehand the size of the keys, we can use fixed size array
instead of vectors. This eliminates the need for a prefixed length in
the serialized form of the InitMessage structure and enables a easy
deserialization of the remote identity before the actual bincode
deserialization that we do in the handshake process.
Before this, the `extract_remote_identity_from_register_init` function
attempted to deserialize into a public key the length-prefixed public key
received from the client, thus failing sporadically with a `Cannot decompress
Edwards point` error.
* Pass public and private attributes to state `init` instead of PublicKey
* Make tauri call with dummy attributes
* Make clients call with their keypairs
* Revert "Make clients call with their keypairs"
This reverts commit b348f47f7a.
* Put dummy, bandwidth private attribute
Co-authored-by: Bogdan-Ștefan Neacșu <bogdan@nymtech.net>
* Calculating gas fees
* Ability to set custom fees
* Added extra test
* Removed commented code
* Moved all msg types to common contract crate
* Temporarily disabling get_tx method
* Finishing up nymd client API
* Comment fix
* Remaining fee values
* Some cleanup
* Removed needless borrow
* Fixed imports in contract tests
* Made contract address optional to allow for contract upload and initialisation
* Using forked cosmwasm
* Basic wallet functionalities
* WIP
* Generic abci_query method
* More API stubs with some semi-working code
* More API stub work
* Moving from fork of cosmos-rust to the upstream
* Implemented most sign-less cosmwasm client methods
* Full contract upload with log parsing
* Implemented most of remaining methods on signing client
* Some initial cleanup on existing code
* Feature-locking nymd client
* Better type for base account
* Pagination handling
* Searching transaction by concrete hash
* basic search_tx
* More cleanup
* Disabled default validator-client features on wasm client
* Fixed account conversion
* Fixed typo in cargo.toml
* Moving back to main cosmos-sdk repo
* Re-exported connect functions
* comment
* Wallet no longer storing signing keys
* Went back to the trait approach
* Example stub of future API
* Removed needless borrow
* Fixed starting page
* Fixed typo
* Using centralised config defaults
* Put endpoints and contract address in one place
* Put common ports in one place
* Split cache version from route
* Share validator-api port value between server and client
* Put BECH32 prefix in defaults
* Put DENOM in defaults
* Put network monitor address in defaults
* Fix clippy
* Fix another clippy + tests import of DENOM
* Basic storage stub
* New models for new node status api
* Route handling
* Mounting new routes
* Missing selective commit
* Moved network monitor related files to separate package
* Starting to see some sqlx action
* Schema updates
* Log statement upon finished migration
* Removed old diesel related imports
* Converted mixnode cache initialisation into a fairing
* Moved cache related functionalities to separate package
Also defined staging there
* Created run method for validator cache + removed unwrap
* Removed old node-status-api types and left bunch of todo placeholders in their place
* Fixed managing validatorcache
* Status reports are starting to get constructed
* Submitting some dummy results to the database
* Removing duplicate code for generating reports
* Removed statuses older than 48h
* Initial attempt at trying to obtain reports for all active nodes
* Removed duplicates from the full report
* Grabbing uptime history
* Updating historical uptimes of active nodes
* Updated sqlx-data.json
* Removed all placeholder foomp owner values
* Changed Layer serde behaviour for easier usage
* Extended validator api config
* Initial (seems working !) integration with network monitor
* Added database path configuration to config
* Using ValidatorCache in NetworkMonitor
* Flag indicating whether validator cache has been initialised
* Introduced a locla-only route for reward script to perform daily chores
* Flag to save config to a file
* Moved spawning of receiving future to run method rather than new
* Removed arguments that dont make sense to be configured via CLI
* Removed dead code from config file
* More dead code removal
* Added validator API to CI
* Corrected manifest-path arguments
* Constructing network monitor by passing config
* Combined validator API CI with the main CI file
* Using query_as for NodeStatus
* Checking if historical uptimes were already calculated on particular day
* Making id field NOT NULL
* More query_as! action
* Updated sqlx-data.json
* Removed unused chrono feature
* Renamed the migration file
* Changed default validator endpoint to point to local validator
* Removing unnecessary clone
* More appropriate naming
* Removed dead code
* Lock file updates
* Updated network monitor address in contract code
* Don't stage node status api if network monitor is disabled
* cargo fmt
* Updated all license notices to SPDX
Mark Sinclair