Created an RTT Tester Client

.github/workflows/build-deb-meta.yml

@@ -9,7 +9,7 @@ jobs:
 
     steps:
       - name: Checkout Repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Set up Build Environment
         run: sudo apt-get update && sudo apt-get install -y make dpkg-dev
@@ -25,14 +25,14 @@ jobs:
           echo "file2=$(ls nym-vpn*.deb)" >> $GITHUB_ENV
 
       - name: Upload nym-repo-setup
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: ${{ env.file1 }}
           path: ppa/packages/nym-repo-setup*.deb
           retention-days: 10
 
       - name: Upload nym-vpn
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: ${{ env.file2 }}
           path: ppa/packages/nym-vpn*.deb

.github/workflows/cd-docs.yml

@@ -10,7 +10,7 @@ jobs:
       run:
         working-directory: documentation/docs
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
       - name: Install Dependencies (Linux)
         run: sudo apt-get update && sudo apt-get install -y build-essential curl wget libssl-dev libudev-dev squashfs-tools protobuf-compiler git python3 && sudo apt-get update --fix-missing
       - name: Install pip3
@@ -21,16 +21,16 @@ jobs:
         run: sudo apt-get install -y rsync
       - uses: rlespinasse/github-slug-action@v3.x
       - name: Setup pnpm
-        uses: pnpm/action-setup@v4.2.0
+        uses: pnpm/action-setup@v4.1.0
         with:
           version: 9
       - uses: actions/setup-node@v4
         with:
           node-version: 20
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
       - name: Build all binaries
         uses: actions-rs/cargo@v1
         with:

.github/workflows/ci-binary-config-checker.yml

@@ -37,16 +37,16 @@ jobs:
 
     runs-on: ${{ matrix.platform }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Install Dependencies (Linux)
         run: sudo apt-get update && sudo apt-get -y install jq vim libwebkit2gtk-4.0-dev build-essential curl wget libssl-dev libgtk-3-dev libudev-dev squashfs-tools
         continue-on-error: true
 
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
 
       - name: Branch name
         run: echo running on branch ${GITHUB_REF##*/}

.github/workflows/ci-build-ts.yml

@@ -12,7 +12,7 @@ jobs:
   build:
     runs-on: ubuntu-22.04
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v4
     - name: Install rsync
       run: sudo apt-get install rsync
       continue-on-error: true

.github/workflows/ci-build-upload-binaries.yml

@@ -28,7 +28,7 @@ jobs:
       CARGO_TERM_COLOR: always
       RUSTUP_PERMIT_COPY_RENAME: 1
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Prepare build output directory
         shell: bash
@@ -46,10 +46,10 @@ jobs:
         run: |
           echo "RUSTFLAGS=--cfg tokio_unstable" >> $GITHUB_ENV
           echo "CARGO_FEATURES=--features tokio-console" >> $GITHUB_ENV
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
 
       - name: Build all binaries
         uses: actions-rs/cargo@v1
@@ -71,7 +71,7 @@ jobs:
 
       - name: Upload Artifact
         if: github.event_name == 'workflow_dispatch'
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: nym-binaries-artifacts
           path: |

.github/workflows/ci-build-vpn-api-wasm.yml

@@ -15,13 +15,13 @@ jobs:
       RUSTUP_PERMIT_COPY_RENAME: 1
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install Rust toolchain
         uses: actions-rs/toolchain@v1
         with:
           profile: minimal
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           target: wasm32-unknown-unknown
           override: true
           components: rustfmt, clippy

.github/workflows/ci-build.yml

@@ -54,13 +54,13 @@ jobs:
         if: contains(matrix.os, 'linux')
 
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install rust toolchain
         uses: actions-rs/toolchain@v1
         with:
           profile: minimal
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           override: true
           components: rustfmt, clippy
 

.github/workflows/ci-cargo-deny.yml

@@ -17,7 +17,7 @@ jobs:
           - licenses bans sources
 
     steps:
-    - uses: actions/checkout@v6
+    - uses: actions/checkout@v4
     - uses: EmbarkStudios/cargo-deny-action@v2
       with:
         log-level: warn

.github/workflows/ci-check-ns-api-version.yml

@@ -13,10 +13,10 @@ jobs:
     runs-on: arc-linux-latest-dind
     steps:
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/ci-check-nym-stats-api-version.yml

@@ -10,13 +10,13 @@ env:
 
 jobs:
   check-if-tag-exists:
-    runs-on: arc-linux-latest-dind
+    runs-on: arc-ubuntu-22.04-dind
     steps:
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/ci-contracts-schema.yml

@@ -16,12 +16,12 @@ jobs:
       CARGO_TERM_COLOR: always
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install Rust toolchain
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
 
       - name: Generate the schema
         run: make contract-schema

.github/workflows/ci-contracts-upload-binaries.yml

@@ -17,7 +17,7 @@ jobs:
     env:
       CARGO_TERM_COLOR: always
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Prepare build output directory
         shell: bash

.github/workflows/ci-contracts.yml

@@ -22,7 +22,7 @@ jobs:
       CARGO_TERM_COLOR: always
       RUSTUP_PERMIT_COPY_RENAME: 1
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Setup rust
         uses: actions-rs/toolchain@v1

.github/workflows/ci-docs.yml

@@ -17,7 +17,7 @@ jobs:
       run:
         working-directory: documentation/docs
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
       - name: Install Dependencies (Linux)
         run: sudo apt-get update && sudo apt-get install -y build-essential curl wget libssl-dev libudev-dev squashfs-tools protobuf-compiler git python3 && sudo apt-get update --fix-missing
       - name: Install pip3
@@ -28,16 +28,16 @@ jobs:
         run: sudo apt-get install -y rsync
       - uses: rlespinasse/github-slug-action@v3.x
       - name: Setup pnpm
-        uses: pnpm/action-setup@v4.2.0
+        uses: pnpm/action-setup@v4.1.0
         with:
           version: 9
       - uses: actions/setup-node@v4
         with:
           node-version: 20
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
       - name: Build all binaries
         uses: actions-rs/cargo@v1
         with:

.github/workflows/ci-lint-typescript.yml

@@ -17,7 +17,7 @@ jobs:
     env:
       RUSTUP_PERMIT_COPY_RENAME: 1
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
       - uses: rlespinasse/github-slug-action@v3.x
 
       - uses: actions/setup-node@v4
@@ -27,10 +27,10 @@ jobs:
       - name: Setup yarn
         run: npm install -g yarn
 
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
 
       - name: Install wasm-pack
         run: curl https://rustwasm.github.io/wasm-pack/installer/init.sh -sSf | sh

.github/workflows/ci-nym-wallet-rust.yml

@@ -25,13 +25,13 @@ jobs:
         continue-on-error: true
 
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install rust toolchain
         uses: actions-rs/toolchain@v1
         with:
           profile: minimal
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           override: true
           components: rustfmt, clippy
 

.github/workflows/ci-nym-wallet-storybook.yml

@@ -8,9 +8,9 @@ on:
 
 jobs:
   build:
-    runs-on: arc-linux-latest-dind
+    runs-on: arc-linux-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Install rsync
         run: sudo apt-get install rsync
@@ -25,10 +25,10 @@ jobs:
       - name: Setup yarn
         run: npm install -g yarn
 
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
 
       - name: Install wasm-pack
         run: curl https://rustwasm.github.io/wasm-pack/installer/init.sh -sSf | sh

.github/workflows/ci-sdk-wasm.yml

@@ -16,7 +16,7 @@ jobs:
       CARGO_TERM_COLOR: always
       RUSTUP_PERMIT_COPY_RENAME: 1
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - uses: actions/setup-node@v4
         with:
@@ -25,13 +25,13 @@ jobs:
       - uses: actions-rs/toolchain@v1
         with:
           profile: minimal
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           target: wasm32-unknown-unknown
           override: true
           components: rustfmt, clippy
 
       - name: Set up Go
-        uses: actions/setup-go@v6
+        uses: actions/setup-go@v5
         with:
           go-version: "1.24.6"
 

.github/workflows/ci-sonar.yml

@@ -10,10 +10,10 @@ jobs:
     name: SonarQube
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
         with:
           fetch-depth: 0  # Shallow clones should be disabled for a better relevancy of analysis
       - name: SonarQube Scan
-        uses: SonarSource/sonarqube-scan-action@v7
+        uses: SonarSource/sonarqube-scan-action@v5
         env:
           SONAR_TOKEN: ${{ secrets.SONAR_TOKEN }}

.github/workflows/deploy-github-pages.yml

@@ -30,11 +30,11 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - name: Setup Pages
         uses: actions/configure-pages@v5
       - name: Upload artifact
-        uses: actions/upload-pages-artifact@v4
+        uses: actions/upload-pages-artifact@v3
         with:
           # Upload entire repository
           path: './ppa'

.github/workflows/greetings.yml

@@ -8,6 +8,6 @@ jobs:
     steps:
     - uses: actions/first-interaction@v3
       with:
-        repo_token: ${{ secrets.GITHUB_TOKEN }}
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        issue_message: 'Thank you for raising this issue'
+        issue-message: 'Thank you for raising this issue'
-        pr_message: 'Thank you for making this first PR'
+        pr-message: 'Thank you for making this first PR'

.github/workflows/nightly-build.yml

@@ -19,7 +19,7 @@ jobs:
     continue-on-error: true
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install Dependencies (Linux)
         run: sudo apt-get update && sudo apt-get install -y build-essential curl wget libssl-dev libudev-dev squashfs-tools protobuf-compiler
@@ -101,7 +101,7 @@ jobs:
       - name: Collect jobs status
         uses: technote-space/workflow-conclusion-action@v3
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - name: install npm
         uses: actions/setup-node@v4
         if: env.WORKFLOW_CONCLUSION == 'failure'

.github/workflows/nightly-check-merge-conflicts.yml

@@ -15,7 +15,7 @@ jobs:
       output1: ${{ steps.step2.outputs.latest_release }}
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
       - name: Set output variable to latest release branch
@@ -28,7 +28,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
       - name: Setup git user
@@ -47,7 +47,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
       - name: Setup git user

.github/workflows/nightly-nym-wallet-build.yml

@@ -18,7 +18,7 @@ jobs:
     continue-on-error: true
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install Dependencies (Linux)
         run: sudo apt-get update && sudo apt-get install -y libwebkit2gtk-4.0-dev build-essential curl wget libssl-dev libgtk-3-dev squashfs-tools
@@ -28,7 +28,7 @@ jobs:
         uses: actions-rs/toolchain@v1
         with:
           profile: minimal
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           override: true
           components: rustfmt, clippy
 
@@ -63,7 +63,7 @@ jobs:
       - name: Collect jobs status
         uses: technote-space/workflow-conclusion-action@v3
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - name: install npm
         uses: actions/setup-node@v4
         if: env.WORKFLOW_CONCLUSION == 'failure'

.github/workflows/nightly-security-audit.yml

@@ -8,11 +8,11 @@ jobs:
     runs-on: ubuntu-22.04
     steps:
       - name: Checkout repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - name: Install rust toolchain
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
       - name: Install cargo deny
         run: cargo install --locked cargo-deny
       - name: Run cargo deny
@@ -20,7 +20,7 @@ jobs:
           find . -name Cargo.toml -exec cargo deny --manifest-path {} check \
             advisories -A advisory-not-detected  --hide-inclusion-graph \; &> \
             >(uniq  &> .github/workflows/support-files/notifications/deny.message )
-      - uses: actions/upload-artifact@v6
+      - uses: actions/upload-artifact@v4
         with:
           name: report
           path: .github/workflows/support-files/notifications/deny.message
@@ -29,9 +29,9 @@ jobs:
     runs-on: custom-linux
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - name: Download report from previous job
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v5
         with:
           name: report
           path: .github/workflows/support-files/notifications

.github/workflows/nym-api-integration-tests.yml

@@ -15,12 +15,12 @@ jobs:
 
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install Rust
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           override: true
 
       - name: Install dependencies

.github/workflows/publish-nym-binaries.yml

@@ -42,7 +42,7 @@ jobs:
       cli_version: ${{ steps.binary-versions.outputs.cli_version }}
 
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Install Dependencies (Linux)
         run: sudo apt-get update && sudo apt-get -y install ripgrep libwebkit2gtk-4.0-dev build-essential curl wget libssl-dev libgtk-3-dev libudev-dev squashfs-tools
@@ -53,10 +53,10 @@ jobs:
           echo 'RUSTFLAGS="--cfg tokio_unstable"' >> $GITHUB_ENV
         if: github.event_name == 'workflow_dispatch' && inputs.add_tokio_unstable == true
 
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: 1.88.0
           override: true
 
       - name: Build all binaries
@@ -66,7 +66,7 @@ jobs:
           args: --workspace --release ${{ env.CARGO_FEATURES }}
   
       - name: Upload Artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: my-artifact
           path: |

.github/workflows/publish-nym-contracts.yml

@@ -9,12 +9,11 @@ jobs:
     if: ${{ (startsWith(github.ref, 'refs/tags/nym-contracts-') && github.event_name == 'release') || github.event_name == 'workflow_dispatch' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: actions-rs/toolchain@v1
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
           target: wasm32-unknown-unknown
           override: true
 
@@ -27,14 +26,14 @@ jobs:
         run: make contracts
 
       - name: Upload Mixnet Contract Artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: mixnet_contract.wasm
           path: contracts/target/wasm32-unknown-unknown/release/mixnet_contract.wasm
           retention-days: 5
 
       - name: Upload Vesting Contract Artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: vesting_contract.wasm
           path: contracts/target/wasm32-unknown-unknown/release/vesting_contract.wasm

.github/workflows/publish-nym-wallet-macos.yml

@@ -21,17 +21,17 @@ jobs:
       release_tag: ${{ github.ref_name }}
 
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Node
         uses: actions/setup-node@v4
         with:
           node-version: 21
           
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: dtolnay/rust-toolchain@stable
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           
       - name: Add Rust target for x86_64-apple-darwin
         run: rustup target add x86_64-apple-darwin
@@ -108,7 +108,7 @@ jobs:
           cd -
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: nym-wallet.app.tar.gz
           path: nym-wallet/target/x86_64-apple-darwin/release/bundle/macos/nym-wallet.app.tar.gz

.github/workflows/publish-nym-wallet-ubuntu.yml

@@ -18,7 +18,7 @@ jobs:
       release_tag: ${{ github.ref_name }}
       
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
       
       - name: Install system dependencies
         run: |
@@ -33,10 +33,10 @@ jobs:
           node-version: 21
           cache: 'yarn'
       
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: dtolnay/rust-toolchain@stable
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
       
       - name: Install project dependencies
         shell: bash
@@ -97,7 +97,7 @@ jobs:
           fi
       
       - name: Upload Artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: nym-wallet-appimage.tar.gz
           path: |

.github/workflows/publish-nym-wallet-win11.yml

@@ -27,12 +27,12 @@ jobs:
       release_tag: ${{ github.ref_name }}
 
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
-      - name: Install Rust toolchain
+      - name: Install Rust stable
         uses: dtolnay/rust-toolchain@stable
         with:
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
 
       - name: Setup MSBuild.exe
         uses: microsoft/setup-msbuild@v2
@@ -128,7 +128,7 @@ jobs:
           find . -name "*.msi" -type f
 
       - name: Upload Artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: nym-wallet.msi
           path: |

.github/workflows/publish-nyms5-android-apk.yml

@@ -22,7 +22,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Install Java
         uses: actions/setup-java@v5
@@ -76,7 +76,7 @@ jobs:
             apk/nyms5-arch64-release.apk
 
       - name: Upload APKs
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v4
         with:
           name: nyms5-apk-arch64
           path: |
@@ -89,9 +89,9 @@ jobs:
     runs-on: custom-linux
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - name: Download binary artifact
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v5
         with:
           name: nyms5-apk-arch64
           path: apk

.github/workflows/publish-sdk-npm.yml

@@ -6,7 +6,7 @@ jobs:
   publish:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
 
       - name: Install Node
         uses: actions/setup-node@v4
@@ -21,7 +21,7 @@ jobs:
         uses: actions-rs/toolchain@v1
         with:
           profile: minimal
-          toolchain: ${{ vars.REQUIRED_RUSTC_VERSION }}
+          toolchain: stable
           override: true
           components: rustfmt, clippy
 

.github/workflows/push-credential-proxy.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/nym-credential-proxy/Cargo.toml

.github/workflows/push-data-observatory.yaml

@@ -8,7 +8,7 @@ env:
 
 jobs:
   build-container:
-    runs-on: arc-linux-latest-dind
+    runs-on: arc-ubuntu-22.04-dind
     steps:
       - name: Login to Harbor
         uses: docker/login-action@v3
@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/push-network-monitor.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/nym-network-monitor/Cargo.toml

.github/workflows/push-node-status-agent.yaml

@@ -25,7 +25,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |

.github/workflows/push-node-status-api.yaml

@@ -24,7 +24,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |

.github/workflows/push-nym-api.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/nym-api/Cargo.toml

.github/workflows/push-nym-node.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/push-nym-statistics-api.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/push-nyx-chain-watcher.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/push-validator-rewarder.yaml

@@ -18,7 +18,7 @@ jobs:
           password: ${{ secrets.HARBOR_ROBOT_SECRET }}
 
       - name: Checkout repo
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
 
       - name: Configure git identity
         run: |
@@ -26,7 +26,7 @@ jobs:
           git config --global user.name "Lawrence Stalder"
 
       - name: Get version from cargo.toml
-        uses: mikefarah/yq@v4.50.1
+        uses: mikefarah/yq@v4.47.1
         id: get_version
         with:
           cmd: yq -oy '.package.version' ${{ env.WORKING_DIRECTORY }}/Cargo.toml

.github/workflows/release-calculate-hash.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out repository code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v4
       - uses: actions/setup-node@v4
         with:
           node-version: 20
@@ -30,7 +30,7 @@ jobs:
         with:
           release-tag-or-name-or-id: ${{ inputs.release_tag }}
 
-      - uses: actions/upload-artifact@v6
+      - uses: actions/upload-artifact@v4
         with:
           name: Asset Hashes
           path: hashes.json

.gitignore

@@ -63,5 +63,3 @@ nym-api/redocly/formatted-openapi.json
 
 **/settings.sql
 **/enter_db.sh
-
-*.profraw

CHANGELOG.md

@@ -4,28 +4,6 @@ Post 1.0.0 release, the changelog format is based on [Keep a Changelog](https://
 
 ## [Unreleased]
 
-## [2025.21-mozzarella] (2025-11-25)
-
-- [bugfix] Tunnel not waiting on MixnetClient to shut down cleanly ([#6225])
-- bugfix: fix credential proxy upgrade mode attestation url arg ([#6202])
-- HTTP API resilience enable & domain rotation conditions ([#6200])
-- Remove debug feature from http-macro spec in gateway probe ([#6195])
-- DNS relibility and troubleshooting  ([#6179])
-- [bugfix] Distinguish authenticator errors by credential spent ([#6176])
-- Typescript SDK 1.4.1 ([#6146])
-- Enable URL rotation and retries for mixnet gateway init ([#6126])
-- Feature/credential proxy jwt ([#5957])
-
-[#6225]: https://github.com/nymtech/nym/pull/6225
-[#6202]: https://github.com/nymtech/nym/pull/6202
-[#6200]: https://github.com/nymtech/nym/pull/6200
-[#6195]: https://github.com/nymtech/nym/pull/6195
-[#6179]: https://github.com/nymtech/nym/pull/6179
-[#6176]: https://github.com/nymtech/nym/pull/6176
-[#6146]: https://github.com/nymtech/nym/pull/6146
-[#6126]: https://github.com/nymtech/nym/pull/6126
-[#5957]: https://github.com/nymtech/nym/pull/5957
-
 ## [2025.20-leerdammer] (2025-11-12)
 
 - Max/tweak ts sdk actions ([#6185])

Cargo.toml

@@ -18,6 +18,7 @@ resolver = "2"
 members = [
     "clients/native",
     "clients/native/websocket-requests",
+    "clients/rtt-tester",
     "clients/socks5",
     "common/async-file-watcher",
     "common/authenticator-requests",
@@ -87,9 +88,7 @@ members = [
     "common/nymsphinx/params",
     "common/nymsphinx/routing",
     "common/nymsphinx/types",
-    "common/nyxd-scraper-sqlite",
+    "common/nyxd-scraper",
-    "common/nyxd-scraper-psql",
-    "common/nyxd-scraper-shared",
     "common/pemstore",
     "common/registration",
     "common/serde-helpers",
@@ -126,7 +125,6 @@ members = [
     "nym-credential-proxy/nym-credential-proxy",
     "nym-credential-proxy/nym-credential-proxy-requests",
     "nym-credential-proxy/vpn-api-lib-wasm",
-    "nym-data-observatory",
     "nym-ip-packet-client",
     "nym-network-monitor",
     "nym-node",
@@ -266,10 +264,9 @@ futures = "0.3.31"
 futures-util = "0.3"
 generic-array = "0.14.7"
 getrandom = "0.2.10"
-glob = "0.3"
 handlebars = "3.5.5"
 hex = "0.4.3"
-hickory-resolver = "0.25.2"
+hickory-resolver = "0.25"
 hkdf = "0.12.3"
 hmac = "0.12.1"
 http = "1"
@@ -351,11 +348,11 @@ tokio-tungstenite = { version = "0.20.1" }
 tokio-util = "0.7.15"
 toml = "0.8.22"
 tower = "0.5.2"
-tower-http = "0.6.6"
+tower-http = "0.5.2"
 tracing = "0.1.41"
 tracing-log = "0.2"
 tracing-opentelemetry = "0.19.0"
-tracing-subscriber = "0.3.20"
+tracing-subscriber = "0.3.19"
 tracing-tree = "0.2.2"
 tracing-indicatif = "0.3.9"
 tracing-test = "0.2.5"
@@ -402,9 +399,7 @@ cw-multi-test = "=2.3.2"
 bip32 = { version = "0.5.3", default-features = false }
 
 
-cosmrs = { version = "0.22.0" }
+cosmrs = { version = "0.21.1" }
-cosmos-sdk-proto = { version = "0.27.0" }
-ibc-proto = { version = "0.52.0" }
 tendermint = "0.40.4"
 tendermint-rpc = "0.40.4"
 prost = { version = "0.13", default-features = false }

ansible/nym-node/playbooks/ansible.cfg

@@ -1,191 +0,0 @@
-# config file for ansible -- http://ansible.com/
-# ==============================================
-
-# nearly all parameters can be overridden in ansible-playbook 
-# or with command line flags. ansible will read ANSIBLE_CONFIG,
-# ansible.cfg in the current working directory, .ansible.cfg in
-# the home directory or /etc/ansible/ansible.cfg, whichever it
-# finds first
-
-[defaults]
-# some basic default values...
-
-inventory       = inventory/all
-#library        = /usr/share/my_modules/
-remote_tmp     = $HOME/.ansible/tmp
-pattern        = *
-forks          = 5
-poll_interval  = 15
-transport      = smart
-remote_port    = 22
-module_lang    = C
-
-# plays will gather facts by default, which contain information about
-# the remote system.
-#
-# smart - gather by default, but don't regather if already gathered
-# implicit - gather by default, turn off with gather_facts: False
-# explicit - do not gather by default, must say gather_facts: True
-gathering = implicit
-
-# additional paths to search for roles in, colon separated
-roles_path    = ../roles
-
-# uncomment this to disable SSH key host checking
-host_key_checking = False
-
-# what flags to pass to sudo
-#sudo_flags = -H
-
-# SSH timeout
-timeout = 100
-
-# default user to use for playbooks if user is not specified
-# (/usr/bin/ansible will use current user as default)
-#remote_user = root
-
-# logging is off by default unless this path is defined
-# if so defined, consider logrotate
-#log_path = /var/log/ansible.log
-
-# default module name for /usr/bin/ansible
-#module_name = command
-
-# use this shell for commands executed under sudo
-# you may need to change this to bin/bash in rare instances
-# if sudo is constrained
-#executable = /bin/sh
-
-# if inventory variables overlap, does the higher precedence one win
-# or are hash values merged together?  The default is 'replace' but
-# this can also be set to 'merge'.
-#hash_behaviour = replace
-
-# list any Jinja2 extensions to enable here:
-#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n
-
-# if set, always use this private key file for authentication, same as 
-# if passing --private -key to ansible or ansible-playbook
-#private_key_file = /path/to/file
-
-# format of string {{ ansible_managed }} available within Jinja2 
-# templates indicates to users editing templates files will be replaced.
-# replacing {file}, {host} and {uid} and strftime codes with proper values.
-ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host}
-
-# by default, ansible-playbook will display "Skipping [host]" if it determines a task
-# should not be run on a host.  Set this to "False" if you don't want to see these "Skipping" 
-# messages. NOTE: the task header will still be shown regardless of whether or not the 
-# task is skipped.
-#display_skipped_hosts = True
-
-# by default (as of 1.3), Ansible will raise errors when attempting to dereference 
-# Jinja2 variables that are not set in templates or action lines. Uncomment this line
-# to revert the behavior to pre-1.3.
-#error_on_undefined_vars = False
-
-# by default (as of 1.6), Ansible may display warnings based on the configuration of the
-# system running ansible itself. This may include warnings about 3rd party packages or
-# other conditions that should be resolved if possible.
-# to disable these warnings, set the following value to False:
-#system_warnings = True
-
-# by default (as of 1.4), Ansible may display deprecation warnings for language
-# features that should no longer be used and will be removed in future versions.
-# to disable these warnings, set the following value to False:
-#deprecation_warnings = True
-
-# (as of 1.8), Ansible can optionally warn when usage of the shell and
-# command module appear to be simplified by using a default Ansible module
-# instead.  These warnings can be silenced by adjusting the following
-# setting or adding warn=yes or warn=no to the end of the command line 
-# parameter string.  This will for example suggest using the git module
-# instead of shelling out to the git command.
-# command_warnings = False
-
-
-# set plugin path directories here, separate with colons
-action_plugins     = ../../other/plugins/action
-callback_plugins   = ../../other/plugins/callback
-connection_plugins = ../../other/plugins/connection
-lookup_plugins     = ../../other/plugins/lookup
-vars_plugins       = ../../other/plugins/vars
-filter_plugins     = ../../other/plugins/filter
-
-# by default callbacks are not loaded for /bin/ansible, enable this if you
-# want, for example, a notification or logging callback to also apply to 
-# /bin/ansible runs
-#bin_ansible_callbacks = False
-
-
-# don't like cows?  that's unfortunate.
-# set to 1 if you don't want cowsay support or export ANSIBLE_NOCOWS=1 
-#nocows = 1
-
-# don't like colors either?
-# set to 1 if you don't want colors, or export ANSIBLE_NOCOLOR=1
-#nocolor = 1
-
-# the CA certificate path used for validating SSL certs. This path 
-# should exist on the controlling node, not the target nodes
-# common locations:
-# RHEL/CentOS: /etc/pki/tls/certs/ca-bundle.crt
-# Fedora     : /etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem
-# Ubuntu     : /usr/share/ca-certificates/cacert.org/cacert.org.crt
-#ca_file_path = 
-
-# the http user-agent string to use when fetching urls. Some web server
-# operators block the default urllib user agent as it is frequently used
-# by malicious attacks/scripts, so we set it to something unique to 
-# avoid issues.
-#http_user_agent = ansible-agent
-
-# if set to a persistant type (not 'memory', for example 'redis') fact values
-# from previous runs in Ansible will be stored.  This may be useful when
-# wanting to use, for example, IP information from one group of servers
-# without having to talk to them in the same playbook run to get their
-# current IP information.
-fact_caching = memory
-
-[paramiko_connection]
-
-# uncomment this line to cause the paramiko connection plugin to not record new host
-# keys encountered.  Increases performance on new host additions.  Setting works independently of the
-# host key checking setting above.
-#record_host_keys=False
-
-# by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this
-# line to disable this behaviour.
-#pty=False
-
-[ssh_connection]
-
-# ssh arguments to use
-# Leaving off ControlPersist will result in poor performance, so use 
-# paramiko on older platforms rather than removing it
-#ssh_args = -o ControlMaster=auto -o ControlPersist=60s
-
-# The path to use for the ControlPath sockets. This defaults to
-# "%(directory)s/ansible-ssh-%%h-%%p-%%r", however on some systems with
-# very long hostnames or very long path names (caused by long user names or 
-# deeply nested home directories) this can exceed the character limit on
-# file socket names (108 characters for most platforms). In that case, you 
-# may wish to shorten the string below.
-# 
-# Example: 
-# control_path = %(directory)s/%%h-%%r
-#control_path = %(directory)s/ansible-ssh-%%h-%%p-%%r
-
-# Enabling pipelining reduces the number of SSH operations required to 
-# execute a module on the remote server. This can result in a significant 
-# performance improvement when enabled, however when using "sudo:" you must 
-# first disable 'requiretty' in /etc/sudoers
-#
-# By default, this option is disabled to preserve compatibility with
-# sudoers configurations that have requiretty (the default on many distros).
-# 
-#pipelining = False
-
-# if True, make ansible use scp if the connection type is ssh 
-# (default is sftp)
-scp_if_ssh = True

ansible/nym-node/playbooks/bond.yml

@@ -1,8 +0,0 @@
----
-- name: Nym node bonding / post-installation
-  hosts: all    # or a specific host/group
-  gather_facts: false
-  serial: 1  
-
-  roles:
-    - role: postinstall

ansible/nym-node/playbooks/deploy.yml

@@ -1,10 +0,0 @@
----
-- name: "Deploy Nym node"
-  hosts: all    # or a specific host/group
-  become: true
-  roles:
-    - base
-    - nym
-    - nginx
-    - tunnel # comment out for mixnode
-    - quic   # comment out for mixnode or non-wireguard gateway

ansible/nym-node/playbooks/group_vars/all.yml

@@ -1,44 +0,0 @@
----
-ansible_ssh_private_key_file: ~/.ssh/<SSH_KEY>
-
-# nym_version: "v2025.21-mozzarella"
-# 
-# NOTE:
-# if you want to pin Nym to a specific version instead of using the
-# latest release from GitHub in /tasks/main.yml then
-# uncomment the line above and set the tag
-
-cli_url: "https://github.com/nymtech/nym/releases/download/nym-binaries-{{ nym_version }}/nym-cli"
-tunnel_manager_url: "https://github.com/nymtech/nym/raw/refs/heads/develop/scripts/nym-node-setup/network-tunnel-manager.sh"
-quic_bridge_deployment_url: "https://raw.githubusercontent.com/nymtech/nym/refs/heads/develop/scripts/nym-node-setup/quic_bridge_deployment.sh"
-
-# NOTE: These values will be used globally unless overwritten per node in inventory/all
-ansible_user: root                       # used for ssh, like `ssh root@nym-exit.ch-1.mynodes.net`
-email: "<EMAIL>"                         # used in certbot, description.toml and landing page
-website: "<WEBSITE>"                     # it is used in the description.toml
-description: "<NODE_PUBLIC_DESCRIPTION>" # or define per node in inventory/all
-
-# NOTE: Set these vars if you want them globally for all nodes
-# Per node changes in inventory/all will overwrite these global ones:
-hostname: ""            # this is a fallback, keep it and setup hostname per node in inventory/all
-# moniker: "<MONIKER>"                    # if not setup here not in inventory/all it get's derived from the hostname
-# mode: <MODE>                            # entry-gateway/exit-gateway/mixnode 
-# wireguard_enabled: <WIREGUARD_ENABLED>  # true/false
-
-# NOTE: Possible vars to incule on landing page, etc.
-# operator_name: "<OPERATOR_NAME>"
-
-packages:
-  - tmux
-  - speedtest-cli
-  - nano
-  - htop
-  - git
-  - zip
-  - nala
-  - curl
-  - neovim
-  - ca-certificates
-  - jq
-  - wget
-  - ufw

ansible/nym-node/playbooks/inventory/all

@@ -1,34 +0,0 @@
-[nym_nodes]
-# READ CONFIGURATION GUIDE:
-# https://nym.com//docs/operators/orchestration/ansible#configuration
-
-# VARIABLES INFO
-# required vars to set values per node: 
-# `ansible_host`, `hostname`, `location`
-
-# global vars can be set in the group_vars/all.yml, for example:
-# `email`, `ansible_user`, `moniker`, `description`,  `mode`, `wireguard_enabled`
-# othersise they must be set per node!
-
-############
-# TEMPLATE #
-############
-# node1 ansible_host=<YOUR_SERVER_IP> ansible_user=<USER> hostname=<HOSTNAME> location=<LOCATION> email=<EMAIL> mode=<MODE> wireguard_enabled=<true/false> moniker=<MONIKER> description=<DESCRIPTION>
-
-# remove all comments and exchange the <VARIABLES> with your real values for each node
-# without <> brackets
-
-# PRIORITY ORDER
-# anything setup globaly can be overwritten in this file per node  
-# if provided here, it takes priority over the global setting
-
-# EXAMPLES
-# exit + wireguard gateway:
-# node2 ansible_host=11.12.13.14 hostname=nym-exit.ch-1.mydomain.net mode=exit-gateway location=CH wireguard_enabled=true
-
-# entry gateway, no wireguard:
-# node3 ansible_host=12.13.14.15 hostname=nym-entry.ch-2.mydomain.net mode=entry-gateway location=CH wireguard_enabled=false
-
-# NOTE:
-# all examples above don't have defined user, email nor description as we use the definition from group_vars/main.yml without an attempt of overwriting it
-# all examples above don't have moniker defined as there is a function in /templates/description.toml.j2 deriving it from the hostname

ansible/nym-node/playbooks/upgrade.yml

@@ -1,9 +0,0 @@
----
-- name: "Upgrade Nym node"
-  hosts: all    # or a specific host/group or limit via -l on CLI (ansible-playbook playbooks/upgrade.yml -l mynode1)
-  become: true
-  serial: 1
-  
-  roles:
-    - base
-    - upgrade

ansible/nym-node/roles/base/tasks/main.yml

@@ -1,22 +0,0 @@
-- name: Set hostname
-  hostname:
-    name: "{{ hostname }}"
-  when: hostname is defined and hostname | length > 0
-
-- name: Install aptitude 
-  apt:
-    name: aptitude
-    update_cache: yes
-    state: present
-    force_apt_get: yes
-
-- name: Update packages
-  apt:
-    update_cache: yes
-    upgrade: yes
-    
-- name: Install essential packages
-  package:
-    name: "{{ packages }}"
-    state: latest
-    update_cache: yes

ansible/nym-node/roles/nginx/tasks/main.yml

@@ -1,61 +0,0 @@
-- name: Install nginx and certbot
-  apt:
-    name:
-      - nginx
-      - certbot
-      - python3-certbot-nginx
-    state: present
-
-- name: Create web root directory
-  file:
-    path: "/var/www/{{ hostname }}"
-    state: directory
-    mode: "0755"
-
-- name: Create landing page template
-  tags: landing
-  template:
-    src: landing.html.j2
-    dest: "/var/www/{{ hostname }}/index.html"
-
-- name: Remove default nginx site
-  file:
-    path: /etc/nginx/sites-enabled/default
-    state: absent
-
-- name: Add bare-bones nginx template
-  template:
-    src: nginx-site.conf.j2
-    dest: "/etc/nginx/sites-available/{{ hostname }}"
-
-- name: Enable nginx config
-  file:
-    src: "/etc/nginx/sites-available/{{ hostname }}"
-    dest: "/etc/nginx/sites-enabled/{{ hostname }}"
-    state: link
-
-- name: Validate nginx configuration
-  command: nginx -t
-  changed_when: false
-
-- name: Obtain SSL certificate
-  command:
-    cmd: "certbot --nginx --non-interactive --agree-tos --redirect -m {{ email }} -d {{ hostname }}"
-
-- name: Add wss config from nginx template
-  template:
-    src: wss-config.conf.j2
-    dest: "/etc/nginx/sites-available/nym-wss-config"
-
-- name: Enable WSS config
-  file:
-    src: "/etc/nginx/sites-available/nym-wss-config"
-    dest: "/etc/nginx/sites-enabled/nym-wss-config"
-    state: link
-
-- name: Validate nginx config after wss
-  command: nginx -t
-  changed_when: false
-
-- name: Restart nginx to apply changes
-  service: name=nginx state=restarted enabled=yes

ansible/nym-node/roles/nginx/tasks/templates/landing.html.j2

@@ -1,218 +0,0 @@
-<!DOCTYPE html>
-<html lang="en-US">
-<head>
-<meta charset="UTF-8">
-<title>This is a NYM Exit Gateway</title>
-<meta name="viewport" content="width=device-width, initial-scale=1">
-<link rel="icon" type="image/png" href="">
-
-<style>
-:root {
-  /* font + theme tokens */
-  font-family: Consolas, "Ubuntu Mono", Menlo, "DejaVu Sans Mono", monospace;
-  --background-color: #242B2D;
-  --text-color: #FFFFFF;
-  --link-color: #07ff94;
-  --title-color: #07ff94;
-}
-
-html {
-  background: var(--background-color);
-}
-
-body {
-  margin-left: auto;
-  margin-right: auto;
-  padding-left: 5vw;
-  padding-right: 5vw;
-  max-width: 1000px;
-  color: var(--text-color); /* default text color */
-}
-
-h1 {
-  font-size: 55px;
-  text-align: center;
-  color: var(--title-color);
-}
-
-p {
-  color: var(--text-color);
-}
-
-p, a {
-  font-size: 20px;
-}
-
-a {
-  color: var(--link-color);
-  text-decoration: none;
-}
-
-a:hover {
-  filter: brightness(.8);
-  text-decoration: underline;
-}
-
-.links {
-  display: flex;
-  flex-wrap: wrap;
-  justify-content: space-evenly;
-}
-
-.links > a {
-  margin: 10px;
-  white-space: nowrap;
-}
-</style>
-</head>
-
-<body>
-<main>
-  <h1>This is a NYM Exit Gateway</h1>
-
-
-  <p>
-    You are most likely accessing this website because you've had some issue with
-    the traffic coming from this IP. This router is part of the <a
-    href="https://nym.com/">NYM project</a>, which is
-    dedicated to <a href="https://nym.com/about/mission">create</a> outstanding
-    privacy software that is legally compliant without sacrificing integrity or
-    having any backdoors.
-    This router IP should be generating no other traffic, unless it has been
-    compromised.
-  </p>
-
-  <p><strong>
-    If you are a representative of a company who feels that this router is being
-    used to violate the DMCA, please be aware that this machine does not host or
-    contain any illegal content. Also be aware that network infrastructure
-    maintainers are not liable for the type of content that passes over their
-    equipment, in accordance with <a
-    href="https://www.law.cornell.edu/uscode/text/17/512">DMCA
-    "safe harbor" provisions</a>. In other words, you will have just as much luck
-    sending a takedown notice to the Internet backbone providers.
-  </strong></p>
-
-  <p>
-    Nym Network is operated by a decentralised community of node operators
-    and stakers. Nym Network is trustless, meaning that no parts of the system
-    nor its operators have access to information that might compromise the privacy
-    of users. Nym software enacts a strict principle of data minimisation and has
-    no back doors. The Nym mixnet works by encrypting packets in several layers
-    and relaying those through a multi-layered network called a mixnet,  eventually
-    letting the traffic exit the Nym mixnet through an exit gateway like this one.
-    This design makes it impossible for a service to know which user is connecting to it,
-    since it can only see the IP-address of the Nym exit gateway:
-  </p>
-
-  <p style="text-align:center;margin:40px 0">
-    <svg xmlns="http://www.w3.org/2000/svg" width="500" viewBox="0 0 490.28 293.73" style="width:100%;max-width:600px" role="img" aria-label="Diagram of how a user connects through the Nym network">
-      <desc>Illustration showing how a user might connect to a service through the Nym Network. The user first sends their data through three daisy-chained encrypted Nym nodes that exist on three different continents. Then the last Nym node in the chain connects to the target service over the normal internet.</desc>
-      <defs>
-        <style>
-          .t {
-            fill: var(--text-color);
-            stroke: var(--text-color);
-          }
-        </style>
-      </defs>
-      <!-- (SVG content left unchanged) -->
-      <path fill="#6fc8b7" d="M257.89 69.4c-6.61-6.36-10.62-7.73-18.36-8.62-7.97-1.83-20.06-7.99-24.17-.67-3.29 5.85-18.2 12.3-16.87 2.08.92-7.03 11.06-13.28 17-17.37 8.69-5.99 24.97-2.87 26.1-10.28 1.04-6.86-8.33-13.22-8.55-2.3-.38 12.84-19.62 2.24-8.73-6.2 8.92-6.9 16.05-9.02 25.61-6.15 12.37 4.83 25.58-2.05 33.73-.71 12.37-2.01 24.69-5.25 37.39-3.96 13 .43 24.08-.14 37.06.63 9.8 1.58 16.5 2.87 26.37 3.6 6.6.48 17.68-.82 24.3 1.9 8.3 4.24.44 10.94-6.89 11.8-8.79 1.05-23.59-1.19-26.6 1.86-5.8 7.41 10.75 5.68 11.27 14.54.57 9.45-5.42 9.38-8.72 16-2.7 4.2.3 13.93-1.18 18.45-1.85 5.64-19.64 4.47-14.7 14.4 4.16 8.34 1.17 19.14-10.33 12.02-5.88-3.65-9.85-22.04-15.66-21.9-11.06.27-11.37 13.18-12.7 17.52-1.3 4.27-3.79 2.33-6-.63-3.54-4.76-7.75-14.22-12.01-17.32-6.12-4.46-10.75-1.17-15.55 2.83-5.63 4.69-8.78 7.82-7.46 16.5.78 9.1-12.9 15.84-14.98 24.09-2.61 10.32-2.57 22.12-8.81 31.47-4 5.98-14.03 20.12-21.27 14.97-7.5-5.34-7.22-14.6-9.56-23.08-2.5-9.02.6-17.35-2.57-26.2-2.45-6.82-6.23-14.54-13.01-13.24-6.5.92-15.08 1.38-19.23-2.97-5.65-5.93-6-10.1-6.61-18.56 1.65-6.94 5.79-12.64 10.38-18.63 3.4-4.42 17.45-10.39 25.26-7.83 10.35 3.38 17.43 10.5 28.95 8.57 3.12-.53 9.14-4.65 7.1-6.62zm-145.6 37.27c-4.96-1.27-11.57 1.13-11.8 6.94-1.48 5.59-4.82 10.62-5.8 16.32.56 6.42 4.34 12.02 8.18 16.97 3.72 3.85 8.58 7.37 9.3 13.1 1.24 5.88 1.6 11.92 2.28 17.87.34 9.37.95 19.67 7.29 27.16 4.26 3.83 8.4-2.15 6.52-6.3-.54-4.54-.6-9.11 1.01-13.27 4.2-6.7 7.32-10.57 12.44-16.64 5.6-7.16 12.74-11.75 14-20.9.56-4.26 5.72-13.86 1.7-16.72-3.14-2.3-15.83-4-18.86-6.49-2.36-1.71-3.86-9.2-9.86-12.07-4.91-3.1-10.28-6.73-16.4-5.97zm11.16-49.42c6.13-2.93 10.58-4.77 14.61-10.25 3.5-4.28 2.46-12.62-2.59-15.45-7.27-3.22-13.08 5.78-18.81 8.71-5.96 4.2-12.07-5.48-6.44-10.6 5.53-4.13.38-9.2-5.66-8.48-6.12.8-12.48-1.45-18.6-1.73-5.3-.7-10.13-1-15.45-1.37-5.37-.05-16.51-2.23-25.13.87-5.42 1.79-12.5 5.3-16.73 9.06-4.85 4.2.2 7.56 5.54 7.45 5.3-.22 16.8-5.36 20.16.98 3.68 8.13-5.82 18.29-5.2 26.69.1 6.2 3.37 11 4.74 16.98 1.62 5.94 6.17 10.45 10 15.14 4.7 5.06 13.06 6.3 19.53 8.23 7.46.14 3.34-9.23 3.01-14.11 1.77-7.15 8.49-7.82 12.68-13.5 7.14-7.72 16.41-13.4 24.34-18.62zM190.88 3.1c-4.69 0-13.33.04-18.17-.34-7.65.12-13.1-.62-19.48-1.09-3.67.39-9.09 3.34-5.28 7.04 3.8.94 7.32 4.92 7.1 9.31 1.32 4.68 1.2 11.96 6.53 13.88 4.76-.2 7.12-7.6 11.93-8.25 6.85-2.05 12.5-4.58 17.87-9.09 2.48-2.76 7.94-6.38 5.26-10.33-1.55-1.31-2.18-.64-5.76-1.13zm178.81 157.37c-2.66 10.08-5.88 24.97 9.4 15.43 7.97-5.72 12.58-2.02 17.47 1.15.5.43 2.65 9.2 7.19 8.53 5.43-2.1 11.55-5.1 14.96-11.2 2.6-4.62 3.6-12.39 2.76-13.22-3.18-3.43-6.24-11.03-7.7-15.1-.76-2.14-2.24-2.6-2.74-.4-2.82 12.85-6.04 1.22-10.12-.05-8.2-1.67-29.62 7.17-31.22 14.86z"/>
-      <g fill="none">
-        <path stroke="#cf63a6" stroke-linecap="round" stroke-width="2.76" d="M135.2 140.58c61.4-3.82 115.95-118.83 151.45-103.33"/>
-        <path stroke="#cf63a6" stroke-linecap="round" stroke-width="2.76" d="M74.43 46.66c38.15 8.21 64.05 42.26 60.78 93.92M286.65 37.25c-9.6 39.44-3.57 57.12-35.64 91.98"/>
-        <path stroke="#e4c101" stroke-dasharray="9.06,2.265" stroke-width="2.27" d="M397.92 162.52c-31.38 1.26-90.89-53.54-148.3-36.17"/>
-        <path stroke="#cf63a6" stroke-linecap="round" stroke-width="2.77" d="M17.6 245.88c14.35 0 14.4.05 28-.03"/>
-        <path stroke="#e3bf01" stroke-dasharray="9.06,2.265" stroke-width="2.27" d="M46.26 274.14c-17.52-.12-16.68.08-30.34.07"/>
-      </g>
-      <g transform="translate(120.8 -35.81)">
-        <circle cx="509.78" cy="68.74" r="18.12" fill="#240a3b" transform="translate(-93.3 38.03) scale(.50637)"/>
-        <circle cx="440.95" cy="251.87" r="18.12" fill="#240a3b" transform="translate(-93.3 38.03) scale(.50637)"/>
-        <circle cx="212.62" cy="272.19" r="18.12" fill="#240a3b" transform="translate(-93.3 38.03) scale(.50637)"/>
-        <circle cx="92.12" cy="87.56" r="18.12" fill="#240a3b" transform="translate(-93.3 38.03) scale(.50637)"/>
-        <circle cx="730.88" cy="315.83" r="18.12" fill="#67727b" transform="translate(-93.3 38.03) scale(.50637)"/>
-        <circle cx="-102.85" cy="282.18" r="9.18" fill="#240a3b"/>
-        <circle cx="-102.85" cy="309.94" r="9.18" fill="#67727b"/>
-      </g>
-      <g class="t">
-        <text xml:space="preserve" x="-24.76" y="10.37" stroke-width=".26" font-size="16.93" font-weight="700" style="line-height:1.25" transform="translate(27.79 2.5)" word-spacing="0"><tspan x="-24.76" y="10.37">The user</tspan></text>
-        <text xml:space="preserve" x="150.63" y="196.62" stroke-width=".26" font-size="16.93" font-weight="700" style="line-height:1.25" transform="translate(27.79 2.5)" word-spacing="0"><tspan x="150.63" y="196.62">This server</tspan></text>
-        <text xml:space="preserve" x="346.39" y="202.63" stroke-width=".26" font-size="16.93" font-weight="700" style="line-height:1.25" transform="translate(27.79 2.5)" word-spacing="0"><tspan x="346.39" y="202.63">Your service</tspan></text>
-        <text xml:space="preserve" x="34.52" y="249.07" stroke-width=".26" font-size="16.93" font-weight="700" style="line-height:1.25" transform="translate(27.79 2.5)" word-spacing="0"><tspan x="34.52" y="249.07">Nym network link</tspan></text>
-        <text xml:space="preserve" x="34.13" y="276.05" stroke-width=".26" font-size="16.93" font-weight="700" style="line-height:1.25" transform="translate(27.79 2.5)" word-spacing="0"><tspan x="34.13" y="276.05">Unencrypted link</tspan></text>
-        <path fill="none" stroke-linecap="round" stroke-width="1.67" d="M222.6 184.1c-2.6-15.27 8.95-23.6 18.43-38.86m186.75 45.61c-.68-10.17-9.4-17.68-18.08-23.49"/>
-        <path fill="none" stroke-linecap="round" stroke-width="1.67" d="M240.99 153.41c.35-3.41 1.19-6.17.04-8.17m-7.15 5.48c1.83-2.8 4.58-4.45 7.15-5.48"/>
-        <path fill="none" stroke-linecap="round" stroke-width="1.67" d="M412.43 173.21c-2.2-3.15-2.54-3.85-2.73-5.85m0 0c2.46-.65 3.85.01 6.67 1.24M61.62 40.8C48.89 36.98 36.45 27.54 36.9 18.96M61.62 40.8c.05-2.58-3.58-4.8-5.25-5.26m-2.65 6.04c1.8.54 6.8 1.31 7.9-.78"/>
-        <path fill="none" stroke-linecap="round" stroke-linejoin="round" stroke-width="2.44" d="M1.22 229.4h247.74v63.1H1.22z"/>
-      </g>
-    </svg>
-  </p>
-
-  <p><a href="https://nym.com/about/mixnet">Read more about how Nym works.</a></p>
-
-  <p>
-    Nym relies on a growing ecosystem of users, developers and researcher partners
-    aligned with the mission to make sure Nym software is running, remains usable
-    and solves real problems. While Nym is not designed for malicious computer
-    users, it is true that they can use the network for malicious ends. This
-    is largely because criminals and hackers have significantly better access to
-    privacy and anonymity than do the regular users whom they prey upon. Criminals
-    can and do build, sell, and trade far larger and more powerful networks than
-    Nym on a daily basis. Thus, in the mind of this operator, the social need for
-    easily accessible censorship-resistant private, anonymous communication trumps
-    the risk of unskilled bad actors, who are almost always more easily uncovered
-    by traditional police work than by extensive monitoring and surveillance anyway.
-  </p>
-
-  <p>
-    In terms of applicable law, the best way to understand Nym is to consider it a
-    network of routers operating as common carriers, much like the Internet
-    backbone. However, unlike the Internet backbone routers, Nym mixnodes do not
-    contain identifiable routing information about the source of a packet and do
-    mix the user internet traffic with that of other users, making communications
-    private and protecting not just the user content but the metadata
-    (user's IP address, who the user talks to, when, where, from what device and
-    more) and no single Nym node can determine both the origin and destination
-    of a given transmission.
-  </p>
-
-  <p>
-    As such, there is nothing the operator of this Exit Gateway can do to help you
-    track the connection further. This Exit Gateway maintains no logs of any of the
-    Nym Network, so there is little that can be done to trace either legitimate or
-    illegitimate traffic and most importantly the operator cannot tell apart one from
-    the other because of the cryptography design making such selection impossible
-    for the operator. Attempts to seize this router will accomplish nothing.
-  </p>
-
-  <p>
-    To decentralise and enable privacy for a broad range of services, this
-    Exit Gateway adopts an <a href="https://nymtech.net/.wellknown/network-requester/exit-policy.txt">Exit Policy</a>
-    serving as a safeguard.
-  </p>
-
-  <p>
-    That being said, if you still have a complaint about the router, you may email the
-    <a href="mailto:{{ email }}">maintainer</a>. If complaints are related to a particular service that is being abused,
-    the maintainer will submit that to the NYM Operators Community in order to add it to the Exit Policy cited above.
-    The community governance can only blacklist entire IP:port destinations across the entire network.
-  </p>
-
-  <p>
-    You also have the option of blocking this IP address and others on the Nym network if you so desire.
-    The Nym project provides a <a href="https://nym.com/explorer">
-    web service</a> to fetch a list of all IP addresses of Nym Gateway Exit nodes that allow exiting to a
-    specified IP:port combination. Please be considerate when using these options.
-  </p>
-  <p style="text-align:center">
-    <img
-      class="logo"
-      src="https://raw.githubusercontent.com/nymtech/websites/main/www/nym.com/public/images/Nym_meta_Image.png"
-      alt=""
-      style="max-width:320px;width:100%;height:auto"
-      onerror="this.onerror=null;this.src='/images/nym_logo.png';"
-    />
-  </p>
-</main>
-</body>
-</html>

ansible/nym-node/roles/nginx/tasks/templates/nginx-site.conf.j2

@@ -1,13 +0,0 @@
-server {
-    listen 80;
-    listen [::]:80;
-
-    server_name {{ hostname }};
-
-    location / {
-        proxy_pass http://127.0.0.1:8080;
-        proxy_set_header X-Real-IP $remote_addr;
-        proxy_set_header Host $host;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-    }
-}

ansible/nym-node/roles/nginx/tasks/templates/wss-config.conf.j2

@@ -1,35 +0,0 @@
-server {
-    listen 9001 ssl http2;
-    listen [::]:9001 ssl http2;
-
-    server_name {{ hostname }};
-
-    ssl_certificate /etc/letsencrypt/live/{{ hostname }}/fullchain.pem;
-    ssl_certificate_key /etc/letsencrypt/live/{{ hostname }}/privkey.pem;
-    include /etc/letsencrypt/options-ssl-nginx.conf;
-    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem;
-
-    access_log /var/log/nginx/access.log;
-    error_log  /var/log/nginx/error.log;
-
-    location /favicon.ico {
-        return 204;
-        access_log off;
-        log_not_found off;
-    }
-
-    location / {
-        add_header 'Access-Control-Allow-Origin' '*' always;
-        add_header 'Access-Control-Allow-Credentials' 'true' always;
-        add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS, HEAD' always;
-        add_header 'Access-Control-Allow-Headers' '*' always;
-
-        proxy_http_version 1.1;
-        proxy_set_header Upgrade $http_upgrade;
-        proxy_set_header Connection "Upgrade";
-        proxy_set_header X-Forwarded-For $remote_addr;
-
-        proxy_pass http://localhost:9000;
-        proxy_intercept_errors on;
-    }
-}

ansible/nym-node/roles/nym/defaults/main.yml

@@ -1,40 +0,0 @@
----
-# Where binaries live
-nym_install_dir: /root/nym-binaries
-
-# nym-node run arguments (defaults, can be overridden per host/group)
-http_bind_address: "0.0.0.0:8080"        # maps to --http-bind-address
-mixnet_bind_address: "0.0.0.0:1789"      # maps to --mixnet-bind-address
-
-
-# WireGuard boolean
-wireguard_enabled: "{{ wireguard_enabled | default(false) | bool }}"
-
-# Landing page base dir, hostname is appended in the task
-landing_page_assets_base_dir: "/var/www"
-
-# Flag toggles
-# accept_operator_terms: true              # controls --accept-operator-terms-and-conditions
-nym_write_flag: true                     # controls -w
-nym_init_only_flag: true                 # controls --init-only
-wss_port: 9001                           # controlls --announce-wss-port
-
-# Optional: extra flags if you want to append more later
-nym_extra_flags: ""
-
-# CLI URL (nym_version can be set elsewhere / via GitHub API)
-nym_cli_url: "https://github.com/nymtech/nym/releases/download/{{ nym_version }}/nym-cli"
-
-# UFW
-nym_ufw_enable: true
-
-nym_ufw_rules:
-  - { port: 22,    proto: tcp }
-  - { port: 80,    proto: tcp }
-  - { port: 443,   proto: tcp }
-  - { port: 1789,  proto: tcp }
-  - { port: 1790,  proto: tcp }
-  - { port: 8080,  proto: tcp }
-  - { port: 9000,  proto: tcp }
-  - { port: 9001,  proto: tcp }
-  - { port: 51822, proto: udp }

ansible/nym-node/roles/nym/files/script.sh

@@ -1 +0,0 @@
-#!/bin/bash

ansible/nym-node/roles/nym/handlers/main.yml

@@ -1,3 +0,0 @@
-- name: Reload systemd
-  systemd:
-    daemon_reload: yes

ansible/nym-node/roles/nym/tasks/config.yml

@@ -1,38 +0,0 @@
----
-# Useful when the host is behind a NAT
-- name: Fetch the public IP address
-  command: "curl -4 canhazip.com"
-  register: ipv4
-  changed_when: false
-  failed_when: false
-
-- name: Set public IP address
-  set_fact:
-    public_ip: "{{ ipv4.stdout | default(ansible_default_ipv4.address) }}"
-
-- name: Initialize nym node
-  # Delete the part from --hostname onward if you run  mode=mixnode only
-  command:
-    cmd: >
-      {{ nym_install_dir }}/nym-node run
-      --mode {{ mode }}
-      --public-ips {{ public_ip }}
-      --http-bind-address {{ http_bind_address }}
-      --mixnet-bind-address {{ mixnet_bind_address }}
-      --location {{ location }}
-      {% if accept_operator_terms %}--accept-operator-terms-and-conditions{% endif %}
-
-      {{ nym_extra_flags }}
-
-      --hostname {{ hostname }}
-      --wireguard-enabled {{ wireguard_enabled }}
-      --landing-page-assets-path {{ landing_page_assets_base_dir }}/{{ hostname }}/
-      {% if nym_write_flag %}-w{% endif %}
-      {% if nym_init_only_flag %}--init-only{% endif %}
-      --announce-wss-port {{ wss_port }}
-
-
-- name: Update nym description
-  template:
-    src: description.toml.j2
-    dest: /root/.nym/nym-nodes/default-nym-node/data/description.toml

ansible/nym-node/roles/nym/tasks/firewall.yml

@@ -1,25 +0,0 @@
-- name: Configure UFW rules
-  ufw:
-    rule: allow
-    port: "{{ item.port }}"
-    proto: "{{ item.proto }}"
-    comment: "{{ item.comment | default(omit) }}"
-  loop: "{{ nym_ufw_rules }}"
-  loop_control:
-    label: "{{ item.port }}/{{ item.proto }}"
-  when:
-    - nym_ufw_enable
-    - item.when | default(true)
-
-- name: Allow bandwidth/topup rule inside WG tunnel
-  command: >
-    ufw allow in on nymwg to any port 51830 proto tcp comment 'bandwidth queries/topup'
-  when:
-    - nym_ufw_enable
-    - (wireguard_enabled | bool)
-
-- name: Enable UFW
-  ufw:
-    state: enabled
-  when:
-    nym_ufw_enable

ansible/nym-node/roles/nym/tasks/install.yml

@@ -1,34 +0,0 @@
----
-- name: Create nym directory
-  file:
-    path: "{{ nym_install_dir }}"
-    state: directory
-    mode: "0755"
-
-- name: Get latest Nym release metadata
-  uri:
-    url: https://api.github.com/repos/nymtech/nym/releases/latest
-    return_content: yes
-  register: latest_release
-  when: nym_version is not defined or nym_version == 'latest'
-
-- name: Set nym_version from GitHub API
-  set_fact:
-    nym_version: "{{ latest_release.json.tag_name }}"
-  when: nym_version is not defined or nym_version == 'latest'
-
-- name: Set binary URL
-  set_fact:
-    binary_url: "https://github.com/nymtech/nym/releases/download/{{ nym_version }}/nym-node"
-
-- name: Download nym-node binary
-  get_url:
-    url: "{{ binary_url }}"
-    dest: "{{ nym_install_dir }}/nym-node"
-    mode: "0755"
-
-- name: Download nym-cli binary
-  get_url:
-    url: "{{ nym_cli_url }}"
-    dest: "{{ nym_install_dir }}/nym-cli"
-    mode: "0755"

ansible/nym-node/roles/nym/tasks/main.yml

@@ -1,12 +0,0 @@
----
-- name: Install Nym binaries
-  import_tasks: install.yml
-
-- name: Configure Nym node
-  import_tasks: config.yml
-
-- name: Configure firewall for Nym
-  import_tasks: firewall.yml
-
-- name: Configure and start Nym service
-  import_tasks: service.yml

ansible/nym-node/roles/nym/tasks/service.yml

@@ -1,15 +0,0 @@
----
-- name: Template systemd service
-  tags: systemctl
-  template:
-    src: nym-node.service.j2
-    dest: /etc/systemd/system/nym-node.service
-  notify: Reload systemd
-
-- name: Enable and start nym service
-  tags: systemctl
-  systemd:
-    name: nym-node
-    enabled: yes
-    state: started
-    daemon_reload: yes

ansible/nym-node/roles/nym/templates/description.toml.j2

@@ -1,20 +0,0 @@
-{# Priority:
-   1. Use moniker if provided in inventory
-   2. Else strip "nym-exit." prefix if hostname starts with it
-   3. Else use hostname unchanged
-#}
-
-{% if moniker is defined and moniker | length > 0 %}
-    {% set moniker_final = moniker %}
-{% else %}
-    {% if hostname is defined and hostname.startswith('nym-exit.') %}
-        {% set moniker_final = hostname | regex_replace('^nym-exit\\.', '') %}
-    {% else %}
-        {% set moniker_final = hostname %}
-    {% endif %}
-{% endif %}
-
-moniker = "{{ moniker_final }}"
-website = " {{ website }}"
-security_contact = "{{ email }}"
-details = "{{ description }}"

ansible/nym-node/roles/nym/templates/nym-node.service.j2

@@ -1,15 +0,0 @@
-[Unit]
-Description=Nym Node
-StartLimitInterval=350
-StartLimitBurst=10
-
-[Service]
-User={{ ansible_user }}
-LimitNOFILE=65536
-ExecStart=/root/nym-binaries/nym-node run --mode {{ mode }} --accept-operator-terms-and-conditions --wireguard-enabled {{ wireguard_enabled }}
-KillSignal=SIGINT
-Restart=on-failure
-RestartSec=30
-
-[Install]
-WantedBy=multi-user.target

ansible/nym-node/roles/postinstall/tasks/main.yml

@@ -1,49 +0,0 @@
-- name: Show which node is being bonded
-  tags: bonding
-  debug:
-    msg: "Bonding Nym node: {{ hostname }}"
-
-- name: Get bonding details
-  tags: bonding
-  command: "/root/nym-binaries/nym-node bonding-information"
-  register: bondinfo
-  changed_when: false
-
-- name: Display bonding info
-  tags: bonding
-  debug:
-    msg: "{{ item }}"
-  loop: "{{ bondinfo.stdout_lines }}"
-
-
-- name: Prompt operator to generate contract message in wallet
-  tags: bonding
-  pause:
-    prompt: |
-      ** Using the bonding information above:
-
-      1. Open your wallet  
-      2. Go to Bonding section
-      3. Fill Hostname and Identity key from the message printed above
-      4. Copy the CONTRACT MESSAGE that your wallet displays  
-      5. Paste it below and press Enter
-
-      Paste CONTRACT MESSAGE here:
-  register: contract_msg_input
-
-- name: Sign bonding contract message on the node
-  tags: bonding
-  command:
-    argv:
-      - /root/nym-binaries/nym-node
-      - sign
-      - --contract-msg
-      - "{{ contract_msg_input.user_input }}"
-      - --output
-      - json
-  register: sign_output
-
-- name: Display full signed message exactly as returned
-  tags: bonding
-  debug:
-    msg: "{{ sign_output.stdout }}"

ansible/nym-node/roles/quic/tasks/main.yml

@@ -1,16 +0,0 @@
-- name: Download quic_bridge_deployment.sh
-  tags: quic bridge deployment
-  get_url:
-    url: "{{ quic_bridge_deployment_url }}"
-    dest: "/root/nym-binaries/quic_bridge_deployment.sh"
-    mode: "0755"
-
-- name: Configure tunnel manager
-  tags: quic bridge deployment
-  become: true
-  command:
-    cmd: "/root/nym-binaries/quic_bridge_deployment.sh {{ item }}"
-  environment:
-    NONINTERACTIVE: "1"
-  loop:
-    - full_bridge_setup

ansible/nym-node/roles/tunnel/tasks/main.yml

@@ -1,14 +0,0 @@
-- name: Download network-tunnel-manager.sh
-  tags: network tunnel manager
-  get_url:
-    url: "{{ tunnel_manager_url }}"
-    dest: "/root/nym-binaries/network-tunnel-manager.sh"
-    mode: "0755"
-
-- name: Configure tunnel manager
-  tags: network tunnel manager
-  become: true
-  command:
-    cmd: "/root/nym-binaries/network-tunnel-manager.sh {{ item }}"
-  loop:
-    - complete_networking_configuration

ansible/nym-node/roles/upgrade/defaults/main.yml

@@ -1,10 +0,0 @@
-nym_binary_dir: /root/nym-binaries
-nym_binary_path: "{{ nym_binary_dir }}/nym-node"
-nym_backup_dir: "{{ nym_binary_dir }}/bak"
-nym_backup_path: "{{ nym_backup_dir }}/nym-node"
-nym_service_name: nym-node
-
-# nym_version: "v2025.21-mozzarella"
-# Optional: set this to pin a specific release tag in (e.g. v2025.21-mozzarella)
-# otherwise the GitHub “latest” release is used
-

ansible/nym-node/roles/upgrade/tasks/fetch_latest.yml

@@ -1,30 +0,0 @@
-- name: Get latest Nym release metadata
-  uri:
-    url: https://api.github.com/repos/nymtech/nym/releases/latest
-    return_content: yes
-  register: latest_release
-  when: nym_version is not defined and not ansible_check_mode
-
-- name: Set nym_version from GitHub API
-  set_fact:
-    nym_version: "{{ latest_release.json.tag_name }}"
-  when: nym_version is not defined and not ansible_check_mode
-
-- name: Show target Nym version tag
-  debug:
-    msg: "Target Nym release tag: {{ nym_version | default('latest (check-mode)') }}"
-
-- name: Generate binary_url from version
-  set_fact:
-    binary_url: >-
-      https://github.com/nymtech/nym/releases/download/{{ nym_version }}/nym-node
-  when: not ansible_check_mode
-
-- name: Download nym-node binary
-  get_url:
-    url: "{{ binary_url }}"
-    dest: "{{ nym_binary_path }}"
-    mode: "0755"
-  register: download_result
-  failed_when: false
-  when: not ansible_check_mode

ansible/nym-node/roles/upgrade/tasks/finalize.yml

@@ -1,122 +0,0 @@
-# run --version on the new binary
-- name: Check new nym-node version
-  command:
-    argv:
-      - "{{ nym_binary_path }}"
-      - --version
-  register: nym_new_version_cmd
-  failed_when: false
-  changed_when: false
-  when: not ansible_check_mode
-
-# show the full stdout so we don’t depend on regex parsing at all
-# show full upgraded version output, line by line
-- name: Show upgraded nym-node version info
-  debug:
-    msg: >-
-      {{
-        [
-          "New nym-node --version rc: " ~ (nym_new_version_cmd.rc | default('unset') | string),
-          "New nym-node --version output:"
-        ]
-        + (nym_new_version_cmd.stdout_lines | default([]))
-      }}
-  when: not ansible_check_mode
-
-# decide if upgrade is successful
-# success means: the binary executed without an error (rc == 0)
-- name: Determine if upgrade is successful
-  set_fact:
-    upgrade_ok: "{{ (nym_new_version_cmd.rc | default(1)) == 0 }}"
-  when: not ansible_check_mode
-
-# show the decision for debugging
-- name: Debug upgrade_ok decision
-  debug:
-    msg:
-      - "upgrade_ok: {{ upgrade_ok }}"
-  when: not ansible_check_mode
-
-#########
-# success
-#########
-
-# show the full version output to the user, line-by-line
-- name: Show upgraded nym-node version info
-  debug:
-    msg:
-      - "Upgraded nym-node version output:"
-      - "{{ nym_new_version_cmd.stdout_lines | default([]) }}"
-  when: not ansible_check_mode and upgrade_ok | default(false)
-
-
-# remove backup
-- name: Remove backup after successful upgrade
-  file:
-    path: "{{ nym_backup_path }}"
-    state: absent
-  when:
-    - not ansible_check_mode
-    - upgrade_ok | default(false)
-    - nym_node_bin.stat.exists | default(false)
-
-# restart service
-- name: Restart nym-node service after successful upgrade
-  systemd:
-    name: "{{ nym_service_name }}"
-    state: restarted
-  when: not ansible_check_mode and upgrade_ok | default(false)
-
-# report success
-- name: Report successful upgrade
-  debug:
-    msg: >-
-      Upgrade successful. nym-node binary executed correctly and the service has been restarted.
-  when: not ansible_check_mode and upgrade_ok | default(false)
-
-#########
-# failure
-#########
-
-- name: Restore previous nym-node binary after failed upgrade
-  copy:
-    src: "{{ nym_backup_path }}"
-    dest: "{{ nym_binary_path }}"
-    mode: "0755"
-    remote_src: true
-  when:
-    - not ansible_check_mode
-    - (upgrade_ok | default(false)) == false
-    - nym_node_bin.stat.exists | default(false)
-
-- name: Remove backup after rollback
-  file:
-    path: "{{ nym_backup_path }}"
-    state: absent
-  when:
-    - not ansible_check_mode
-    - (upgrade_ok | default(false)) == false
-    - nym_node_bin.stat.exists | default(false)
-
-# always restart the service with the restored binary
-- name: Restart nym-node service with previous version after failed upgrade
-  systemd:
-    name: "{{ nym_service_name }}"
-    state: restarted
-  when:
-    - not ansible_check_mode
-    - (upgrade_ok | default(false)) == false
-    - nym_node_bin.stat.exists | default(false)
-
-- name: Report failed upgrade and rollback
-  debug:
-    msg: >-
-      Upgrade NOT successful. The previous nym-node binary has been restored
-      and the nym-node service has been restarted with the old version.
-  when: not ansible_check_mode and (upgrade_ok | default(false)) == false
-
-# optional: hard-fail the play for CI environments
-#- name: Fail the play to signal upgrade failure
-#  fail:
-#    msg: "nym-node upgrade failed; rolled back to previous binary."
-#  when: not ansible_check_mode and (upgrade_ok | default(false)) == false

ansible/nym-node/roles/upgrade/tasks/main.yml

@@ -1,8 +0,0 @@
-- name: Prepare for nym-node upgrade (backup, stop service)
-  include_tasks: prepare.yml
-
-- name: Fetch and install latest nym-node binary
-  include_tasks: fetch_latest.yml
-
-- name: Verify new nym-node and finalize (restart or rollback)
-  include_tasks: finalize.yml

ansible/nym-node/roles/upgrade/tasks/prepare.yml

@@ -1,69 +0,0 @@
-# stop service before touching the binary
-- name: Stop nym-node service
-  systemd:
-    name: "{{ nym_service_name }}"
-    state: stopped
-  when: not ansible_check_mode
-
-# check if the current binary exists
-- name: Check existing nym-node binary
-  stat:
-    path: "{{ nym_binary_path }}"
-  register: nym_node_bin
-
-# capture current nym-node version (if present)
-- name: Capture current nym-node version (if present)
-  command:
-    argv:
-      - "{{ nym_binary_path }}"
-      - --version
-  register: nym_current_version_cmd
-  failed_when: false
-  changed_when: false
-  when:
-    - nym_node_bin.stat.exists
-    - not ansible_check_mode
-
-# show full current version output instead of trying to parse it
-# show full current version output, line by line
-- name: Show current nym-node version info
-  debug:
-    msg: >-
-      {{
-        [
-          "Current nym-node --version rc: " ~ (nym_current_version_cmd.rc | default('unset') | string),
-          "Current nym-node --version output:"
-        ]
-        + (nym_current_version_cmd.stdout_lines | default([]))
-      }}
-  when:
-    - nym_node_bin.stat.exists
-    - not ansible_check_mode
-
-# ensure backup directory exists
-- name: Ensure backup directory exists
-  file:
-    path: "{{ nym_backup_dir }}"
-    state: directory
-    mode: "0755"
-  when: not ansible_check_mode
-
-# backup existing nym-node binary
-- name: Backup existing nym-node binary
-  copy:
-    src: "{{ nym_binary_path }}"
-    dest: "{{ nym_backup_path }}"
-    remote_src: true
-    mode: "0755"
-  when:
-    - not ansible_check_mode
-    - nym_node_bin.stat.exists
-
-# remove current nym-node binary
-- name: Remove current nym-node binary
-  file:
-    path: "{{ nym_binary_path }}"
-    state: absent
-  when:
-    - not ansible_check_mode
-    - nym_node_bin.stat.exists

clients/native/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "nym-client"
-version = "1.1.67"
+version = "1.1.66"
 authors = ["Dave Hrycyszyn <futurechimp@users.noreply.github.com>", "Jędrzej Stuczyński <andrew@nymtech.net>"]
 description = "Implementation of the Nym Client"
 edition = "2021"

clients/native/examples/js-examples/websocket/package-lock.json

@@ -2594,9 +2594,9 @@
       }
     },
     "node_modules/node-forge": {
-      "version": "1.3.2",
+      "version": "1.3.0",
-      "resolved": "https://registry.npmjs.org/node-forge/-/node-forge-1.3.2.tgz",
+      "resolved": "https://registry.npmjs.org/node-forge/-/node-forge-1.3.0.tgz",
-      "integrity": "sha512-6xKiQ+cph9KImrRh0VsjH2d8/GXA4FIMlgU4B757iI1ApvcyA9VlouP0yZJha01V+huImO+kKMU7ih+2+E14fw==",
+      "integrity": "sha512-08ARB91bUi6zNKzVmaj3QO7cr397uiDT2nJ63cHjyNtCTWIgvS47j3eT0WfzUwS9+6Z5YshRaoasFkXCKrIYbA==",
       "dev": true,
       "engines": {
         "node": ">= 6.13.0"
@@ -6494,9 +6494,9 @@
       }
     },
     "node-forge": {
-      "version": "1.3.2",
+      "version": "1.3.0",
-      "resolved": "https://registry.npmjs.org/node-forge/-/node-forge-1.3.2.tgz",
+      "resolved": "https://registry.npmjs.org/node-forge/-/node-forge-1.3.0.tgz",
-      "integrity": "sha512-6xKiQ+cph9KImrRh0VsjH2d8/GXA4FIMlgU4B757iI1ApvcyA9VlouP0yZJha01V+huImO+kKMU7ih+2+E14fw==",
+      "integrity": "sha512-08ARB91bUi6zNKzVmaj3QO7cr397uiDT2nJ63cHjyNtCTWIgvS47j3eT0WfzUwS9+6Z5YshRaoasFkXCKrIYbA==",
       "dev": true
     },
     "node-releases": {

clients/rtt-tester/Cargo.toml

@@ -0,0 +1,22 @@
+[package]
+name = "nym-client-rtt-tester"
+version = "0.1.0"
+edition = "2021"
+description = "RTT testing client built using nym-client-core"
+license.workspace = true
+
+[[bin]]
+name = "nym-client-rtt-tester"
+path = "src/main.rs"
+
+[dependencies]
+tokio = { workspace = true, features = ["full"] }
+tracing = { workspace = true }
+nym-client-core = { path = "../../common/client-core" }
+nym-network-defaults = { path = "../../common/network-defaults" }
+nym-sphinx = { path = "../../common/nymsphinx" }
+nym-topology = { path = "../../common/topology" }
+nym-config = { path = "../../common/config" }
+nym-task = { path = "../../common/task" }
+nym-crypto = { path = "../../common/crypto" }
+nym-sdk = { path = "../../sdk/rust/nym-sdk" }

clients/rtt-tester/src/main.rs

@@ -0,0 +1,466 @@
+use nym_sdk::mixnet;
+use nym_sdk::mixnet::MixnetMessageSender;
+
+use nym_client_core::client::rtt_analyzer::{RttAnalyzer, RttConfig, RttEvent, RttPattern};
+use nym_sdk::DebugConfig;
+use tokio::io::{self, AsyncBufReadExt};
+use tokio::time::{sleep, Duration};
+
+#[tokio::main]
+async fn main() {
+    // ============================================================
+    // 1. Start RTT Analyzer + background worker
+    // ============================================================
+    let _analyzer = RttAnalyzer::new();
+
+    let tx = RttAnalyzer::producer().expect("Analyzer was not initialized!");
+
+    // ============================================================
+    // 2. Build mixnet client
+    // ============================================================
+    let mut debug = DebugConfig::default();
+
+    // Disable ALL Poisson & cover streams
+    debug.traffic.disable_main_poisson_packet_distribution = true;
+    debug.cover_traffic.disable_loop_cover_traffic_stream = false;
+
+    let client = mixnet::MixnetClientBuilder::new_ephemeral()
+        .debug_config(debug)
+        .build()
+        .unwrap();
+
+    let client = client.connect_to_mixnet().await.unwrap();
+
+    let our_address = client.nym_address();
+    println!("Our client nym address is: {our_address}");
+
+    // ============================================================
+    // 3. Ask the user for RTT TEST configuration
+    // ============================================================
+    let config = ask_user_for_rtt_config().await;
+
+    println!("\nStarting RTT test with:");
+    println!("  packets_per_route = {}", config.packets_per_route);
+    println!("  pattern           = {:?}", config.pattern);
+    println!("  delay (ms)        = {}", config.inter_route_delay_ms);
+
+    // START THE TEST
+    let _ = client
+        .send_rtt_test(*our_address, None, tx.clone(), config)
+        .await
+        .unwrap();
+
+    // ============================================================
+    // 4. Background listener for incoming messages
+    // ============================================================
+    tokio::spawn({
+        let mut client = client;
+        async move {
+            loop {
+                if client.wait_for_messages().await.is_some() {
+                    //I should do something here to shutdown
+                }
+                sleep(Duration::from_millis(10)).await;
+            }
+        }
+    });
+
+    // ============================================================
+    // 5. Main input loop
+    // ============================================================
+    let stdin = io::BufReader::new(io::stdin());
+    let mut lines = stdin.lines();
+
+    println!("Type 'menu' to show RTT commands.");
+
+    loop {
+        if let Ok(Some(input)) = lines.next_line().await {
+            let input = input.trim().to_lowercase();
+
+            if input == "menu" {
+                show_menu_and_handle_choice(&tx).await;
+            }
+        }
+
+        sleep(Duration::from_millis(50)).await;
+    }
+}
+
+// =====================================================================
+// ASK USER FOR RTT TEST SETTINGS AT PROGRAM START
+// =====================================================================
+async fn ask_user_for_rtt_config() -> RttConfig {
+    let stdin = io::BufReader::new(io::stdin());
+    let mut lines = stdin.lines();
+
+    println!("\n========== RTT TEST CONFIGURATION ==========");
+
+    // -----------------------------
+    // Ask for packets per route
+    // -----------------------------
+    println!("Enter number of packets per route: ");
+    let packets = read_u32_from_stdin(&mut lines).await;
+
+    // -----------------------------
+    // Ask for pattern: Burst / RR
+    // -----------------------------
+    println!("Choose pattern:");
+    println!("  1) Burst");
+    println!("  2) Round Robin");
+    let pattern = loop {
+        let input = read_string(&mut lines).await;
+
+        match input.as_str() {
+            "1" => break RttPattern::Burst,
+            "2" => break RttPattern::RoundRobin,
+            _ => println!("Invalid choice! Please type 1 or 2:"),
+        }
+    };
+
+    // -----------------------------
+    // Ask for delay between packets
+    // -----------------------------
+    println!("Enter delay between packets (ms): ");
+    let delay = read_u64_from_stdin(&mut lines).await;
+
+    // Build Config
+    RttConfig {
+        packets_per_route: packets,
+        pattern,
+        inter_route_delay_ms: delay,
+    }
+}
+
+// =====================================================================
+// Util functions for reading typed input
+// =====================================================================
+async fn read_string(lines: &mut tokio::io::Lines<io::BufReader<io::Stdin>>) -> String {
+    loop {
+        if let Ok(Some(line)) = lines.next_line().await {
+            let trimmed = line.trim().to_string();
+            if !trimmed.is_empty() {
+                return trimmed;
+            }
+        }
+        println!("Please type a value:");
+    }
+}
+
+async fn read_u32_from_stdin(lines: &mut tokio::io::Lines<io::BufReader<io::Stdin>>) -> u32 {
+    loop {
+        if let Ok(Some(line)) = lines.next_line().await {
+            if let Ok(num) = line.trim().parse::<u32>() {
+                return num;
+            }
+        }
+        println!("Invalid number, try again:");
+    }
+}
+
+async fn read_u64_from_stdin(lines: &mut tokio::io::Lines<io::BufReader<io::Stdin>>) -> u64 {
+    loop {
+        if let Ok(Some(line)) = lines.next_line().await {
+            if let Ok(num) = line.trim().parse::<u64>() {
+                return num;
+            }
+        }
+        println!("Invalid number, try again:");
+    }
+}
+// =====================================================================
+// MENU HANDLER (FULL VERSION WITH HELP / DOCS)
+// =====================================================================
+async fn show_menu_and_handle_choice(tx: &tokio::sync::mpsc::Sender<RttEvent>) {
+    println!("\n======================== RTT MENU ========================");
+    println!("1) Print global RTT statistics");
+    println!("2) Write statistics to CSV file");
+    println!("3) Print route details by ROUTE INDEX");
+    println!("4) Print route details by ROUTE NODES STRING");
+    println!("5) Print routes with AVG RTT above threshold");
+    println!("6) Print routes with ANY RTT above threshold");
+    println!("7) Help (Show all commands & how to use them)");
+    println!("8) Write CSV and generate RTT histogram(s) with Python");
+    println!("9) Show overall experiment completion percentage");
+    println!("===========================================================");
+    print!("Select option: ");
+
+    use std::io::Write;
+    std::io::stdout().flush().unwrap();
+
+    let mut input = String::new();
+    let _ = std::io::stdin().read_line(&mut input);
+    let choice = input.trim();
+
+    match choice {
+        // -------------------- 1. PRINT GLOBAL STATS --------------------
+        "1" => {
+            let _ = tx.send(RttEvent::PrintStats).await;
+        }
+
+        // -------------------- 2. WRITE STATS ---------------------------
+        "2" => {
+            print!("Enter file path: ");
+            std::io::stdout().flush().unwrap();
+
+            let mut path = String::new();
+            let _ = std::io::stdin().read_line(&mut path);
+
+            let path = path.trim().to_string();
+            let _ = tx.send(RttEvent::WriteStats { path }).await;
+        }
+
+        // -------------------- 3. PRINT ROUTE DETAILS -------------------
+        "3" => {
+            print!("Enter route index (0-based): ");
+            std::io::stdout().flush().unwrap();
+
+            let mut s = String::new();
+            let _ = std::io::stdin().read_line(&mut s);
+
+            if let Ok(index) = s.trim().parse::<usize>() {
+                let _ = tx
+                    .send(RttEvent::PrintRouteDetail { route_index: index })
+                    .await;
+            } else {
+                println!("Invalid index.");
+            }
+        }
+
+        // -------------------- 4. PRINT STATS BY NODE STRING -----------
+        "4" => {
+            println!("Enter Node String EXACTLY as stored.");
+            println!("Example format:");
+            println!("  <base58_node1> > <base58_node2> > <base58_node3>");
+            print!("Nodes: ");
+            std::io::stdout().flush().unwrap();
+
+            let mut nodes = String::new();
+            let _ = std::io::stdin().read_line(&mut nodes);
+
+            let nodes = nodes.trim().to_string();
+            let _ = tx.send(RttEvent::PrintRouteStatsByNodes { nodes }).await;
+        }
+
+        // -------------------- 5. AVG ABOVE THRESHOLD ------------------
+        "5" => {
+            print!("Enter threshold in ms: ");
+            std::io::stdout().flush().unwrap();
+
+            let mut s = String::new();
+            let _ = std::io::stdin().read_line(&mut s);
+
+            if let Ok(th) = s.trim().parse::<u128>() {
+                let _ = tx
+                    .send(RttEvent::PrintRoutesWithAvgAbove { threshold_ms: th })
+                    .await;
+            } else {
+                println!("Invalid number.");
+            }
+        }
+
+        // -------------------- 6. ANY ABOVE THRESHOLD ------------------
+        "6" => {
+            print!("Enter threshold in ms: ");
+            std::io::stdout().flush().unwrap();
+
+            let mut s = String::new();
+            let _ = std::io::stdin().read_line(&mut s);
+
+            if let Ok(th) = s.trim().parse::<u128>() {
+                let _ = tx
+                    .send(RttEvent::PrintRoutesWithAnyAbove { threshold_ms: th })
+                    .await;
+            } else {
+                println!("Invalid number.");
+            }
+        }
+
+        // -------------------- 7. HELP --------------------------------
+        "7" => {
+            print_help();
+        }
+        "8" => {
+            // Ask for CSV path
+            print!("Enter CSV output path (e.g. rtt_stats.csv): ");
+            std::io::stdout().flush().unwrap();
+
+            let mut path = String::new();
+            let _ = std::io::stdin().read_line(&mut path);
+            let path = path.trim().to_string();
+
+            // Sub-menu for histogram mode
+            println!("\nHistogram mode:");
+            println!("  1) One plot with ALL RTT samples (including outliers)");
+            println!("  2) One plot with INLIERS only (RTT <= cutoff)");
+            println!("  3) TWO plots: one for INLIERS and one for OUTLIERS");
+            print!("Select mode: ");
+            std::io::stdout().flush().unwrap();
+
+            let mut mode_input = String::new();
+            let _ = std::io::stdin().read_line(&mut mode_input);
+            let mode_choice = mode_input.trim();
+
+            let outlier_mode = match mode_choice {
+                // 1) All RTTs
+                "1" => "all".to_string(),
+
+                // 2) Only inliers, ask for cutoff in seconds
+                "2" => {
+                    print!("Enter cutoff in seconds (e.g. 1.0 for 1 second): ");
+                    std::io::stdout().flush().unwrap();
+
+                    let mut c = String::new();
+                    let _ = std::io::stdin().read_line(&mut c);
+                    let cutoff = c.trim();
+                    cutoff.to_string() // e.g. "1.0"
+                }
+
+                // 3) Two plots: inliers + outliers (both)
+                "3" => {
+                    print!("Enter cutoff in seconds (e.g. 1.0 for 1 second): ");
+                    std::io::stdout().flush().unwrap();
+
+                    let mut c = String::new();
+                    let _ = std::io::stdin().read_line(&mut c);
+                    let cutoff = c.trim();
+                    // Encode as 'both:<cutoff>' so Python can understand it
+                    format!("both:{cutoff}")
+                }
+
+                _ => {
+                    println!("Invalid mode, aborting histogram generation.");
+                    return;
+                }
+            };
+
+            let _ = tx
+                .send(RttEvent::WriteStatsAndPlot { path, outlier_mode })
+                .await;
+        }
+
+        "9" => {
+            // Send an event to the RTT analyzer to compute and print progress
+            let _ = tx.send(RttEvent::PrintExperimentProgress).await;
+        }
+
+        _ => println!("Invalid selection."),
+    }
+}
+
+fn print_help() {
+    println!("\n======================== RTT HELP ========================\n");
+
+    println!("This tool allows you to perform detailed RTT analysis over all mixnet routes.");
+    println!("The client sends RTT probe traffic through every candidate route,");
+    println!("and the RTT analyzer collects per-route statistics in the background.\n");
+
+    println!("Main commands (from the RTT menu):\n");
+
+    println!("  1) Print global RTT statistics");
+    println!("     Prints one summary line per route:");
+    println!("       - route index");
+    println!("       - packets sent (including retransmissions)");
+    println!("       - number of ACKs");
+    println!("       - number of timeouts");
+    println!("       - average RTT (computed over all stored RTT samples, in ms)");
+    println!();
+
+    println!("  2) Write stats to CSV file");
+    println!("     Writes one line per route to a CSV file on disk.");
+    println!("     Current CSV columns:");
+    println!("       route,sent,acks,timeouts,avg_rtt");
+    println!("         route     : numeric route index");
+    println!("         sent      : how many FragmentSent events were recorded");
+    println!("         acks      : how many FragmentAckReceived events were recorded");
+    println!("         timeouts  : how many FragmentAckExpired events were recorded");
+    println!("         avg_rtt   : average RTT (in milliseconds) from all RTT samples");
+    println!();
+
+    println!("  3) Print route details BY ROUTE INDEX");
+    println!("     Input: a 0-based route index.");
+    println!("     Output for that route:");
+    println!("       - node list (base58 identities) in order: Node1 > Node2 > Node3");
+    println!("       - ALL RTT samples recorded for that route (each sample shown in ms)");
+    println!("     This is useful when you already know the route index and");
+    println!("     want to inspect exactly how it behaves packet by packet.");
+    println!();
+
+    println!("  4) Print route details BY NODE STRING");
+    println!("     Input format must match exactly what the analyzer stored, for example:");
+    println!("       <node1_base58> > <node2_base58> > <node3_base58>");
+    println!("     If a route with that node sequence exists, the tool will:");
+    println!("       - print the matching route index");
+    println!("       - print the full per-route detail (same as option 3).");
+    println!("     This is useful when you have a specific mixnode combination");
+    println!("     (e.g. a slow or suspicious path) and want its statistics.");
+    println!();
+
+    println!("  5) Print routes with AVERAGE RTT ABOVE a threshold");
+    println!("     You provide a threshold in milliseconds (e.g. 150).");
+    println!("     The tool will:");
+    println!("       - compute avg RTT for each route");
+    println!("       - select only routes where avg RTT > threshold");
+    println!("       - print detailed info for each matching route (nodes + RTT samples).");
+    println!("     Use this to quickly find generally slow routes.");
+    println!();
+
+    println!("  6) Print routes with ANY RTT ABOVE a threshold");
+    println!("     You provide a threshold in milliseconds (e.g. 500).");
+    println!("     For each route, if at least one RTT sample exceeds the threshold,");
+    println!("     that route is printed with full details.");
+    println!("     Use this to find routes that occasionally spike very high,");
+    println!("     even if their average RTT is still acceptable.");
+    println!();
+
+    println!("  7) Show experiment progress (percentage completed)");
+    println!("     Uses the stored experiment configuration (total_routes, packets_per_route)");
+    println!("     plus the number of RTT samples recorded so far to estimate:");
+    println!("       completion = received_samples / (total_routes * packets_per_route)");
+    println!("     The result is printed as a percentage (0%–100%).");
+    println!("     This tells you roughly how far the RTT experiment has progressed.");
+    println!();
+
+    println!("  8) Write stats AND generate histogram(s) via Python");
+    println!("     This command will:");
+    println!("       1) Write the current route statistics to a CSV file (same as option 2).");
+    println!("       2) Call the Python script 'rtt_histogram.py' to visualize RTTs.");
+    println!();
+    println!("     When prompted, you will provide two things:");
+    println!("       - CSV file path (where to save the stats)");
+    println!("       - outlier_mode string, which controls which histograms are generated:");
+    println!();
+    println!("         • \"all\"");
+    println!("             Use ALL avg_rtt values from the CSV.");
+    println!(
+        "             Result: a single histogram containing every route's avg RTT (in seconds)."
+    );
+    println!();
+    println!("         • \"<cutoff>\" (numeric, in seconds, e.g. \"1.0\")");
+    println!("             Only keep avg_rtt <= cutoff.");
+    println!("             Result: a single histogram with INLIERS only (values <= cutoff).");
+    println!(
+        "             Example: \"1.0\" keeps everything at or below 1.0s and drops slower routes."
+    );
+    println!();
+    println!("         • \"both:<cutoff>\" (e.g. \"both:1.0\")");
+    println!("             Split the data into two sets:");
+    println!("               - inliers  : avg_rtt <= cutoff");
+    println!("               - outliers : avg_rtt >  cutoff");
+    println!("             Result: TWO histograms are generated:");
+    println!("               1) Distribution of inliers");
+    println!("               2) Distribution of outliers");
+    println!(
+        "             This helps visually compare the \"normal\" routes and the very slow ones."
+    );
+    println!();
+
+    println!("Helpful notes:");
+    println!("  • RTT samples are computed when a FragmentReceived event arrives.");
+    println!("    For each fragment that may be retransmitted, the analyzer stores");
+    println!("    multiple send times and receive times, and pairs them in order");
+    println!("    to compute multiple RTT values for that fragment if needed.");
+    println!("  • \"sent\" in the stats includes retransmissions as well, so it may be");
+    println!("    higher than packets_per_route for unstable routes.");
+
+    println!("===========================================================\n");
+}

clients/socks5/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "nym-socks5-client"
-version = "1.1.67"
+version = "1.1.66"
 authors = ["Dave Hrycyszyn <futurechimp@users.noreply.github.com>"]
 description = "A SOCKS5 localhost proxy that converts incoming messages to Sphinx and sends them to a Nym address"
 edition = "2021"

common/client-core/Cargo.toml

@@ -29,6 +29,8 @@ time = { workspace = true }
 tokio = { workspace = true, features = ["sync", "macros"] }
 tracing = { workspace = true }
 zeroize = { workspace = true }
+once_cell = "1.19"
+
 
 # internal
 nym-id = { path = "../nym-id" }

common/client-core/gateways-storage/.sqlx/query-06e743d143fcc4be20ca2af5e99b19f15d22fff72490473587a14cdc046fda32.json

@@ -6,14 +6,14 @@
       {
         "name": "exists",
         "ordinal": 0,
-        "type_info": "Integer"
+        "type_info": "Int"
       }
     ],
     "parameters": {
       "Right": 1
     },
     "nullable": [
-      false
+      null
     ]
   },
   "hash": "06e743d143fcc4be20ca2af5e99b19f15d22fff72490473587a14cdc046fda32"

common/client-core/gateways-storage/.sqlx/query-0e85ec18da67cf4e3df04ad80136571f6e920eb2290f20b1b8c5b0ab4b489985.json

@@ -0,0 +1,44 @@
+{
+  "db_name": "SQLite",
+  "query": "SELECT * FROM remote_gateway_details WHERE gateway_id_bs58 = ?",
+  "describe": {
+    "columns": [
+      {
+        "name": "gateway_id_bs58",
+        "ordinal": 0,
+        "type_info": "Text"
+      },
+      {
+        "name": "gateway_owner_address",
+        "ordinal": 1,
+        "type_info": "Text"
+      },
+      {
+        "name": "gateway_listener",
+        "ordinal": 2,
+        "type_info": "Text"
+      },
+      {
+        "name": "derived_aes128_ctr_blake3_hmac_keys_bs58",
+        "ordinal": 3,
+        "type_info": "Text"
+      },
+      {
+        "name": "derived_aes256_gcm_siv_key",
+        "ordinal": 4,
+        "type_info": "Blob"
+      }
+    ],
+    "parameters": {
+      "Right": 1
+    },
+    "nullable": [
+      false,
+      true,
+      false,
+      true,
+      true
+    ]
+  },
+  "hash": "0e85ec18da67cf4e3df04ad80136571f6e920eb2290f20b1b8c5b0ab4b489985"
+}

common/client-core/gateways-storage/.sqlx/query-0f1dfb89f1eb39f4a58787af0f53a7a93afb7e4d2e54e2d38fd79d31c8575a54.json

@@ -0,0 +1,12 @@
+{
+  "db_name": "SQLite",
+  "query": "\n                UPDATE remote_gateway_details\n                SET\n                    derived_aes128_ctr_blake3_hmac_keys_bs58 = ?,\n                    derived_aes256_gcm_siv_key = ?\n                WHERE gateway_id_bs58 = ?\n            ",
+  "describe": {
+    "columns": [],
+    "parameters": {
+      "Right": 3
+    },
+    "nullable": []
+  },
+  "hash": "0f1dfb89f1eb39f4a58787af0f53a7a93afb7e4d2e54e2d38fd79d31c8575a54"
+}

common/client-core/gateways-storage/.sqlx/query-4b739e12ea8d917cb17580337caeabb05f0e3ddbec04fdfa111d0fc86ba75505.json

@@ -1,38 +0,0 @@
-{
-  "db_name": "SQLite",
-  "query": "SELECT\n                rgd.gateway_id_bs58,\n                derived_aes256_gcm_siv_key,\n                gateway_listener,\n                fallback_listener\n            FROM\n                remote_gateway_details AS rgd\n            INNER JOIN\n                remote_gateway_shared_keys AS rgsk\n            ON\n                rgd.gateway_id_bs58 = rgsk.gateway_id_bs58\n            WHERE\n                rgd.gateway_id_bs58 = ?",
-  "describe": {
-    "columns": [
-      {
-        "name": "gateway_id_bs58",
-        "ordinal": 0,
-        "type_info": "Text"
-      },
-      {
-        "name": "derived_aes256_gcm_siv_key",
-        "ordinal": 1,
-        "type_info": "Blob"
-      },
-      {
-        "name": "gateway_listener",
-        "ordinal": 2,
-        "type_info": "Text"
-      },
-      {
-        "name": "fallback_listener",
-        "ordinal": 3,
-        "type_info": "Text"
-      }
-    ],
-    "parameters": {
-      "Right": 1
-    },
-    "nullable": [
-      false,
-      false,
-      false,
-      true
-    ]
-  },
-  "hash": "4b739e12ea8d917cb17580337caeabb05f0e3ddbec04fdfa111d0fc86ba75505"
-}

common/client-core/gateways-storage/.sqlx/query-700a75acbcd90c74baa7823c40739a8ff8a26400c1d2bd45a689970bf1ba0e66.json

@@ -1,12 +0,0 @@
-{
-  "db_name": "SQLite",
-  "query": "\n                INSERT INTO remote_gateway_shared_keys(gateway_id_bs58, derived_aes256_gcm_siv_key)\n                VALUES (?, ?)\n            ",
-  "describe": {
-    "columns": [],
-    "parameters": {
-      "Right": 2
-    },
-    "nullable": []
-  },
-  "hash": "700a75acbcd90c74baa7823c40739a8ff8a26400c1d2bd45a689970bf1ba0e66"
-}

common/client-core/gateways-storage/.sqlx/query-8909fd329e7e5fb16c4989b15b3d3a12bba1569520e01f6f074178e23d6ee89e.json

@@ -1,6 +1,6 @@
 {
   "db_name": "SQLite",
-  "query": "\n                INSERT INTO registered_gateway(gateway_id_bs58, registration_timestamp, gateway_type)\n                VALUES (?, ?, ?)\n            ",
+  "query": "\n                INSERT INTO registered_gateway(gateway_id_bs58, registration_timestamp, gateway_type) \n                VALUES (?, ?, ?)\n            ",
   "describe": {
     "columns": [],
     "parameters": {
@@ -8,5 +8,5 @@
     },
     "nullable": []
   },
-  "hash": "727598e516090da6d26e36d09062b60ccb76d6468f359891428c0bfb96ddd7ef"
+  "hash": "8909fd329e7e5fb16c4989b15b3d3a12bba1569520e01f6f074178e23d6ee89e"
 }

common/client-core/gateways-storage/.sqlx/query-a64a557ba87d4b2c7457857afa7ebc7d4f895fc4991da18ec02c9e250bea0fe0.json

@@ -1,12 +0,0 @@
-{
-  "db_name": "SQLite",
-  "query": "\n                INSERT INTO remote_gateway_details(gateway_id_bs58, gateway_listener, fallback_listener)\n                VALUES (?, ?, ?)\n            ",
-  "describe": {
-    "columns": [],
-    "parameters": {
-      "Right": 3
-    },
-    "nullable": []
-  },
-  "hash": "a64a557ba87d4b2c7457857afa7ebc7d4f895fc4991da18ec02c9e250bea0fe0"
-}

common/client-core/gateways-storage/.sqlx/query-a6939bea03b10cde810a9a099bd597b4f51092e30a41c4085a8f8668f039f7c0.json

@@ -0,0 +1,12 @@
+{
+  "db_name": "SQLite",
+  "query": "\n                INSERT INTO remote_gateway_details(gateway_id_bs58, derived_aes128_ctr_blake3_hmac_keys_bs58, derived_aes256_gcm_siv_key, gateway_owner_address, gateway_listener)\n                VALUES (?, ?, ?, ?, ?)\n            ",
+  "describe": {
+    "columns": [],
+    "parameters": {
+      "Right": 5
+    },
+    "nullable": []
+  },
+  "hash": "a6939bea03b10cde810a9a099bd597b4f51092e30a41c4085a8f8668f039f7c0"
+}

common/client-core/gateways-storage/.sqlx/query-b059bc3688b6b7f83f47048db9897720fd4e6f3211bf74030a9638f7bf6738e4.json

@@ -1,6 +1,6 @@
 {
   "db_name": "SQLite",
-  "query": "\n                INSERT INTO custom_gateway_details(gateway_id_bs58, data)\n                VALUES (?, ?)\n            ",
+  "query": "\n                INSERT INTO custom_gateway_details(gateway_id_bs58, data) \n                VALUES (?, ?)\n            ",
   "describe": {
     "columns": [],
     "parameters": {
@@ -8,5 +8,5 @@
     },
     "nullable": []
   },
-  "hash": "2c113b37864f9fec7e64c0f8fdd38edcdf149acfd38c56a4db3bbf97bdb13210"
+  "hash": "b059bc3688b6b7f83f47048db9897720fd4e6f3211bf74030a9638f7bf6738e4"
 }

common/client-core/gateways-storage/Cargo.toml

@@ -9,6 +9,7 @@ rust-version.workspace = true
 
 [dependencies]
 async-trait.workspace = true
+cosmrs.workspace = true
 serde = { workspace = true, features = ["derive"] }
 thiserror.workspace = true
 time.workspace = true
@@ -19,7 +20,6 @@ zeroize = { workspace = true, features = ["zeroize_derive"] }
 
 nym-crypto = { path = "../../crypto", features = ["asymmetric"] }
 nym-gateway-requests = { path = "../../gateway-requests" }
-nym-gateway-client = { path = "../../client-libs/gateway-client" }
 
 [target."cfg(not(target_arch = \"wasm32\"))".dependencies.sqlx]
 workspace = true

common/client-core/gateways-storage/fs_gateways_migrations/20251126120000_remove_legacy_add_fallback.sql

@@ -1,22 +0,0 @@
-/*
- * Copyright 2025 - Nym Technologies SA <contact@nymtech.net>
- * SPDX-License-Identifier: Apache-2.0
- */
-
-CREATE TABLE remote_gateway_details_temp
-(
-    gateway_id_bs58                          TEXT NOT NULL UNIQUE PRIMARY KEY REFERENCES registered_gateway (gateway_id_bs58),
-    derived_aes256_gcm_siv_key               BLOB NOT NULL,
-    gateway_listener                         TEXT NOT NULL,
-    fallback_listener                        TEXT,
-    expiration_timestamp                     DATETIME NOT NULL
-);
-
--- keep only registrations with a non null aes256 key
-INSERT INTO remote_gateway_details_temp SELECT gateway_id_bs58, derived_aes256_gcm_siv_key, gateway_listener, NULL, datetime(0, 'unixepoch') FROM remote_gateway_details WHERE derived_aes256_gcm_siv_key IS NOT NULL;
-
-DROP TABLE remote_gateway_details;
-ALTER TABLE remote_gateway_details_temp RENAME TO remote_gateway_details;
-
--- delete registrations with no key
-DELETE FROM registered_gateway WHERE gateway_id_bs58 NOT IN ( SELECT gateway_id_bs58 FROM remote_gateway_details);

common/client-core/gateways-storage/src/backend/fs_backend/manager.rs

@@ -6,7 +6,6 @@ use crate::{
     types::{
         RawActiveGateway, RawCustomGatewayDetails, RawRegisteredGateway, RawRemoteGatewayDetails,
     },
-    RawGatewayPublishedData,
 };
 use sqlx::{
     sqlite::{SqliteAutoVacuum, SqliteSynchronous},
@@ -145,11 +144,13 @@ impl StorageManager {
         &self,
         gateway_id: &str,
     ) -> Result<RawRemoteGatewayDetails, sqlx::Error> {
-        // query_as! macro doesn't use fromRow
+        sqlx::query_as!(
-        sqlx::query_as("SELECT * FROM remote_gateway_details WHERE gateway_id_bs58 = ?")
+            RawRemoteGatewayDetails,
-            .bind(gateway_id)
+            "SELECT * FROM remote_gateway_details WHERE gateway_id_bs58 = ?",
-            .fetch_one(&self.connection_pool)
+            gateway_id
-            .await
+        )
+        .fetch_one(&self.connection_pool)
+        .await
     }
 
     pub(crate) async fn set_remote_gateway_details(
@@ -158,36 +159,41 @@ impl StorageManager {
     ) -> Result<(), sqlx::Error> {
         sqlx::query!(
             r#"
-                INSERT INTO remote_gateway_details(gateway_id_bs58, derived_aes256_gcm_siv_key, gateway_listener, fallback_listener, expiration_timestamp)
+                INSERT INTO remote_gateway_details(gateway_id_bs58, derived_aes128_ctr_blake3_hmac_keys_bs58, derived_aes256_gcm_siv_key, gateway_owner_address, gateway_listener)
                 VALUES (?, ?, ?, ?, ?)
             "#,
             remote.gateway_id_bs58,
+            remote.derived_aes128_ctr_blake3_hmac_keys_bs58,
             remote.derived_aes256_gcm_siv_key,
-            remote.published_data.gateway_listener,
+            remote.gateway_owner_address,
-            remote.published_data.fallback_listener,
+            remote.gateway_listener,
-            remote.published_data.expiration_timestamp
         )
             .execute(&self.connection_pool)
             .await?;
         Ok(())
     }
 
-    pub(crate) async fn update_remote_gateway_published_data(
+    pub(crate) async fn update_remote_gateway_key(
         &self,
         gateway_id_bs58: &str,
-        published_data: &RawGatewayPublishedData,
+        derived_aes128_ctr_blake3_hmac_keys_bs58: Option<&str>,
+        derived_aes256_gcm_siv_key: Option<&[u8]>,
     ) -> Result<(), sqlx::Error> {
         sqlx::query!(
             r#"
-                UPDATE remote_gateway_details SET gateway_listener = ?, fallback_listener = ?, expiration_timestamp = ? WHERE gateway_id_bs58 = ?
+                UPDATE remote_gateway_details
+                SET
+                    derived_aes128_ctr_blake3_hmac_keys_bs58 = ?,
+                    derived_aes256_gcm_siv_key = ?
+                WHERE gateway_id_bs58 = ?
             "#,
-            published_data.gateway_listener,
+            derived_aes128_ctr_blake3_hmac_keys_bs58,
-            published_data.fallback_listener,
+            derived_aes256_gcm_siv_key,
-            published_data.expiration_timestamp,
             gateway_id_bs58
         )
-            .execute(&self.connection_pool)
+        .execute(&self.connection_pool)
-            .await?;
+        .await?;
+
         Ok(())
     }
 

common/client-core/gateways-storage/src/backend/fs_backend/mod.rs

@@ -2,16 +2,18 @@
 // SPDX-License-Identifier: Apache-2.0
 
 use crate::{
-    ActiveGateway, BadGateway, GatewayDetails, GatewayPublishedData, GatewayRegistration,
+    ActiveGateway, BadGateway, GatewayDetails, GatewayRegistration, GatewayType,
-    GatewayType, GatewaysDetailsStore, StorageError,
+    GatewaysDetailsStore, StorageError,
 };
 use async_trait::async_trait;
 use manager::StorageManager;
 use nym_crypto::asymmetric::ed25519;
+use nym_gateway_requests::SharedSymmetricKey;
 use std::path::Path;
 
 pub mod error;
 mod manager;
+mod models;
 
 #[derive(Clone)]
 pub struct OnDiskGatewaysDetails {
@@ -132,15 +134,16 @@ impl GatewaysDetailsStore for OnDiskGatewaysDetails {
         Ok(())
     }
 
-    async fn update_gateway_published_data(
+    async fn upgrade_stored_remote_gateway_key(
         &self,
-        gateway_id: &ed25519::PublicKey,
+        gateway_id: ed25519::PublicKey,
-        published_data: &GatewayPublishedData,
+        updated_key: &SharedSymmetricKey,
     ) -> Result<(), Self::StorageError> {
         self.manager
-            .update_remote_gateway_published_data(
+            .update_remote_gateway_key(
                 &gateway_id.to_base58_string(),
-                &published_data.into(),
+                None,
+                Some(updated_key.as_bytes()),
             )
             .await?;
         Ok(())

common/client-core/gateways-storage/src/backend/fs_backend/models.rs

@@ -0,0 +1,2 @@
+// Copyright 2024 - Nym Technologies SA <contact@nymtech.net>
+// SPDX-License-Identifier: Apache-2.0

common/client-core/gateways-storage/src/backend/mem_backend.rs

@@ -2,9 +2,10 @@
 // SPDX-License-Identifier: Apache-2.0
 
 use crate::types::{ActiveGateway, GatewayRegistration};
-use crate::{BadGateway, GatewayDetails, GatewayPublishedData, GatewaysDetailsStore};
+use crate::{BadGateway, GatewayDetails, GatewaysDetailsStore};
 use async_trait::async_trait;
-use nym_crypto::asymmetric::ed25519;
+use nym_crypto::asymmetric::ed25519::PublicKey;
+use nym_gateway_requests::{SharedGatewayKey, SharedSymmetricKey};
 use std::collections::HashMap;
 use std::sync::Arc;
 use thiserror::Error;
@@ -95,17 +96,26 @@ impl GatewaysDetailsStore for InMemGatewaysDetails {
         Ok(())
     }
 
-    async fn update_gateway_published_data(
+    async fn upgrade_stored_remote_gateway_key(
         &self,
-        gateway_id: &ed25519::PublicKey,
+        gateway_id: PublicKey,
-        published_data: &GatewayPublishedData,
+        updated_key: &SharedSymmetricKey,
     ) -> Result<(), Self::StorageError> {
         let mut guard = self.inner.write().await;
-        if let Some(gateway) = guard.gateways.get_mut(&gateway_id.to_base58_string()) {
+
-            if let GatewayDetails::Remote(ref mut remote_details) = gateway.details {
+        #[allow(clippy::unwrap_used)]
-                remote_details.published_data = published_data.clone();
+        if let Some(target) = guard.gateways.get_mut(&gateway_id.to_string()) {
-            }
+            let GatewayDetails::Remote(details) = &mut target.details else {
+                return Ok(());
+            };
+            assert_eq!(Arc::strong_count(&details.shared_key), 1);
+
+            // eh. that's nasty, but it's only ever used for ephemeral clients so should be fine for now...
+            details.shared_key = Arc::new(SharedGatewayKey::Current(
+                SharedSymmetricKey::try_from_bytes(updated_key.as_bytes()).unwrap(),
+            ))
         }
+
         Ok(())
     }
 

common/client-core/gateways-storage/src/error.rs

@@ -18,6 +18,16 @@ pub enum BadGateway {
         source: Ed25519RecoveryError,
     },
 
+    #[error("the account owner of gateway {gateway_id} ({raw_owner}) is malformed: {source}")]
+    MalformedGatewayOwnerAccountAddress {
+        gateway_id: String,
+
+        raw_owner: String,
+
+        #[source]
+        source: cosmrs::ErrorReport,
+    },
+
     #[error("the shared keys provided for gateway {gateway_id} are malformed: {source}")]
     MalformedSharedKeys {
         gateway_id: String,
@@ -40,12 +50,4 @@ pub enum BadGateway {
         #[source]
         source: url::ParseError,
     },
-
-    #[error("the listening address ({raw_listener}) is malformed: {source}")]
-    MalformedListenerNoId {
-        raw_listener: String,
-
-        #[source]
-        source: url::ParseError,
-    },
 }

common/client-core/gateways-storage/src/lib.rs

@@ -6,6 +6,7 @@
 
 use async_trait::async_trait;
 use nym_crypto::asymmetric::ed25519;
+use nym_gateway_requests::SharedSymmetricKey;
 use std::error::Error;
 
 pub mod backend;
@@ -59,11 +60,10 @@ pub trait GatewaysDetailsStore {
         details: &GatewayRegistration,
     ) -> Result<(), Self::StorageError>;
 
-    /// Update the gateway details
+    async fn upgrade_stored_remote_gateway_key(
-    async fn update_gateway_published_data(
         &self,
-        gateway_id: &ed25519::PublicKey,
+        gateway_id: ed25519::PublicKey,
-        published_data: &GatewayPublishedData,
+        updated_key: &SharedSymmetricKey,
     ) -> Result<(), Self::StorageError>;
 
     /// Remove given gateway details from the underlying store.