---
title: "NymVPN CLI: Run NymVPN from the Command Line"
description: "Install and run NymVPN from the terminal on Linux, macOS, and Windows. Includes ARM64 .deb packages, account setup, tunnel configuration, and gateway selection."
schemaType: "HowTo"
section: "Developers"
lastUpdated: "2026-03-12"
---

import { Callout } from 'nextra/components'

# Nym VPN CLI

This is a short guide to setting up and using the `nym-vpnc` tool, which is used in conjunction with the `nym-vpnd` daemon.

Download and run instructions for the GUIs can be found [here](https://nymvpn.com/en/download/linux).

## Download & Extract Binary
Check the [release page](https://github.com/nymtech/nym-vpn-client/releases/) page for the latest release version and modify the instructions accordingly. These instructions use the latest as of the time of writing.
```sh
wget -q https://github.com/nymtech/nym-vpn-client/releases/download/nym-vpn-core-v1.27.0-beta/nym-vpn-core-v1.27.0-beta_<YOUR_OPERATING_SYSTEM>.tar.gz &&
tar -xzf nym-vpn-core-v1.27.0-beta_<YOUR_OPERATING_SYSTEM>.tar.gz &&
cd nym-vpn-core-v1.27.0-beta_<YOUR_OPERATING_SYSTEM>/ &&
chmod u+x *
```

### Linux ARM64 (.deb)

ARM64 `.deb` packages are available for Linux distributions that support them (e.g. Ubuntu/Debian on Raspberry Pi or ARM servers). Install both the daemon and the client:

```sh
sudo dpkg -i nym-vpnd_<VERSION>_arm64.deb
sudo dpkg -i nym-vpnc_<VERSION>_arm64.deb
```

The `.deb` package installs a systemd service that starts `nym-vpnd` automatically. Verify the service is running:

```sh
service nym-vpnd status
```

You should see output similar to:

```sh
● nym-vpnd.service - nym-vpnd daemon
     Loaded: loaded (/usr/lib/systemd/system/nym-vpnd.service; enabled; preset: enabled)
     Active: active (running)
```

Verify the installed version with `nym-vpnc info`:

```sh
nym-vpnc info
```
```sh
nym-vpnd:
  version: 1.25.0
  build_timestamp (utc): 2026-03-02 16:25:31.229479864 +00:00:00
  triple: aarch64-unknown-linux-gnu
  platform: Ubuntu; Linux (Ubuntu 24.04); aarch64
  git_commit: fce7a84e612b8d2cb48b66695cdaf023d7f9a42b
```

## Build from Source
### Prerequisites
All operating systems require both [Rust](https://www.rust-lang.org/tools/install) and [Go](https://go.dev/doc/install).

**Arch specific packages:**
```sh
yay -S gcc make protobuf base-devel clang
```

**Ubuntu24 specific packages:**
```sh
apt install gcc make protobuf-compiler pkconfig libdbus-1-dev build-essential clang
```

<Callout type="warning" emoji="⚠️">
  Older Debian/Ubuntu versions need to manually install `protobuf-compiler` >= v3.21.12
</Callout>

### Clone & `make`
```sh
git clone https://github.com/nymtech/nym-vpn-client.git
cd nym-vpn-client/
make
```

## Start the Daemon

If you installed via `.deb` packages, the daemon is already running as a systemd service. You can check its status with:

```sh
service nym-vpnd status
```

If you are running from pre-built binaries or a source build, start the daemon manually:

```sh
sudo ./PATH/TO/nym-vpnd
```

<Callout type="info">
  Leave the daemon running and run `nym-vpnc` commands in a separate terminal window.
</Callout>

## Account Setup

### Create an Account

Head to [https://nym.com/account/create](https://nym.com/account/create) and obtain a passphrase (mnemonic).

### Log In

Store your account passphrase on this device:

```sh
nym-vpnc account set "<YOUR_PASSPHRASE>"
```

### Check Account Status

Verify that the device is logged in and view account details:

```sh
nym-vpnc account get
```

Example output:

```sh
Account identity: n1wlmrpa7ts7znz7nxvmxevaw65796cr6q6pht69
Canonical Account identity: n1wlmrpa7ts7znz7nxvmxevaw65796cr6q6pht69
Account mode: Some(Api)
Account state: Error(BandwidthExceeded { context: "SYNCING_STATE" })
```

### Account Summary & Balance

```sh
nym-vpnc account summary
nym-vpnc account balance
```

### Account Links

Get URLs for managing your NymVPN account:

```sh
nym-vpnc account links
```

### Forget Account

Remove the stored passphrase, device keys, and local credentials from this device:

```sh
nym-vpnc account forget
```

### Device Information

View the current device identity:

```sh
nym-vpnc device get
```

## Tunnel Configuration

Print current tunnel configuration:

```sh
nym-vpnc tunnel get
```

Enable two-hop mode (WireGuard): traffic jumps directly from entry gateway to exit gateway:

```sh
nym-vpnc tunnel set --two-hop on
```

Enable Mixnet (5-hop): disable two-hop to route traffic through the full mixnet for maximum privacy:

```sh
nym-vpnc tunnel set --two-hop off
```

Enable or disable IPv6:

```sh
nym-vpnc tunnel set --ipv6 on
```

Enable censorship circumvention transports (currently QUIC):

```sh
nym-vpnc tunnel set --circumvention-transports on
```

<Callout type="info">
  Run `nym-vpnc tunnel set --help` for all available tunnel options including mixnet timing parameters.
</Callout>

## Gateway Configuration

Set entry and exit gateways bound to specific countries using [ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2) country codes:

```sh
nym-vpnc gateway set --entry-country US --exit-country JP
```

Print current gateway configuration:

```sh
nym-vpnc gateway get
```

Example output:

```sh
Entry point: Country { two_letter_iso_country_code: "US" }
Exit point: Country { two_letter_iso_country_code: "JP" }
Residential exit: off
```

Only use residential exit nodes:

```sh
nym-vpnc gateway set --residential-exit on
```

### List Available Gateways

List available WireGuard gateways (use a wide terminal window for the table output):

```sh
nym-vpnc gateway list wg
```

You can also list mixnet entry and exit gateways:

```sh
nym-vpnc gateway list mixnet-entry
nym-vpnc gateway list mixnet-exit
```

## Connect & Disconnect

Connect using the settings stored in `nym-vpnd`:

```sh
nym-vpnc connect
```

Disconnect:

```sh
nym-vpnc disconnect
```

Reconnect:

```sh
nym-vpnc reconnect
```

Print the current tunnel status:

```sh
nym-vpnc status
```

Continuously stream tunnel status in real time:

```sh
nym-vpnc status --listen
```

## Ad-Block

NymVPN includes a built-in ad-blocker (Brave ad-engine). Ad-blocking is only active while the tunnel is connected.

Enable ad-block:

```sh
nym-vpnc ad-block set enabled
```

Disable ad-block:

```sh
nym-vpnc ad-block set disabled
```

<Callout type="info">
  You can test ad-blocking with [adblock.turtlecute.org](https://adblock.turtlecute.org/). Some browsers cache DNS internally, so toggling ad-block on/off at runtime may not have an immediate effect; a browser restart may be needed. Use `nslookup` or `dig` to verify that domains are being blocked.
</Callout>

## DNS

View current DNS configuration:

```sh
nym-vpnc dns get
nym-vpnc dns get-default
```

Set custom DNS servers:

```sh
nym-vpnc dns set 1.1.1.1 9.9.9.9
nym-vpnc dns enable
```

Disable custom DNS and revert to defaults:

```sh
nym-vpnc dns disable
```

Clear custom DNS servers:

```sh
nym-vpnc dns clear
```

## Local Network Access

Control whether local network (LAN) traffic is allowed while the tunnel is active:

```sh
nym-vpnc lan get
nym-vpnc lan set allow
nym-vpnc lan set block
```

## SOCKS5 Proxy

NymVPN can expose a local SOCKS5 proxy:

```sh
nym-vpnc socks5 enable
nym-vpnc socks5 disable
nym-vpnc socks5 status
```

## Network

View or change the Nym network (requires a daemon restart):

```sh
nym-vpnc network get
nym-vpnc network set mainnet
```

## Diagnostic

Run connectivity diagnostics:

```sh
nym-vpnc diagnostic run
```

## Getting Help

Any `nym-vpnc` command has built-in help. Add `--help` to the end of any command to view available options:

```sh
nym-vpnc --help
nym-vpnc connect --help
nym-vpnc tunnel set --help
```

## Default Config Directories
Configurations are stored in `/etc/nym`. State stored between runs (keys, mnemonic, etc) are stored in `/var/lib/nym-vpnd`.
