|
|
|
@@ -6,54 +6,69 @@ Usage: nym-node run [OPTIONS]
|
|
|
|
|
Options:
|
|
|
|
|
--id <ID> Id of the nym-node to use [env: NYMNODE_ID=] [default: default-nym-node]
|
|
|
|
|
--config-file <CONFIG_FILE> Path to a configuration file of this node [env: NYMNODE_CONFIG=]
|
|
|
|
|
--accept-operator-terms-and-conditions Explicitly specify whether you agree with the terms and conditions of a nym node operator as defined at <https://nymtech.net/terms-and-conditions/operators/v1.0.0> [env: NYMNODE_ACCEPT_OPERATOR_TERMS=]
|
|
|
|
|
--accept-operator-terms-and-conditions Explicitly specify whether you agree with the terms and conditions of a nym node operator as defined at
|
|
|
|
|
<https://nymtech.net/terms-and-conditions/operators/v1.0.0> [env: NYMNODE_ACCEPT_OPERATOR_TERMS=]
|
|
|
|
|
--deny-init Forbid a new node from being initialised if configuration file for the provided specification doesn't already exist [env: NYMNODE_DENY_INIT=]
|
|
|
|
|
--init-only If this is a brand new nym-node, specify whether it should only be initialised without actually running the subprocesses [env: NYMNODE_INIT_ONLY=]
|
|
|
|
|
--local Flag specifying this node will be running in a local setting [env: NYMNODE_LOCAL=]
|
|
|
|
|
--mode [<MODE>...] Specifies the current mode(s) of this nym-node [env: NYMNODE_MODE=] [possible values: mixnode, entry-gateway, exit-gateway, exit-providers-only]
|
|
|
|
|
--modes <MODES> Specifies the current mode(s) of this nym-node as a single flag [env: NYMNODE_MODES=] [possible values: mixnode, entry-gateway, exit-gateway, exit-providers-only]
|
|
|
|
|
--modes <MODES> Specifies the current mode(s) of this nym-node as a single flag [env: NYMNODE_MODES=] [possible values: mixnode, entry-gateway, exit-gateway,
|
|
|
|
|
exit-providers-only]
|
|
|
|
|
-w, --write-changes If this node has been initialised before, specify whether to write any new changes to the config file [env: NYMNODE_WRITE_CONFIG_CHANGES=]
|
|
|
|
|
--bonding-information-output <BONDING_INFORMATION_OUTPUT> Specify output file for bonding information of this nym-node, i.e. its encoded keys. NOTE: the required bonding information is still a subject to change and this argument should be treated only as a preview of
|
|
|
|
|
future features [env: NYMNODE_BONDING_INFORMATION_OUTPUT=]
|
|
|
|
|
--bonding-information-output <BONDING_INFORMATION_OUTPUT> Specify output file for bonding information of this nym-node, i.e. its encoded keys. NOTE: the required bonding information is still a subject to change
|
|
|
|
|
and this argument should be treated only as a preview of future features [env: NYMNODE_BONDING_INFORMATION_OUTPUT=]
|
|
|
|
|
-o, --output <OUTPUT> Specify the output format of the bonding information (`text` or `json`) [env: NYMNODE_OUTPUT=] [default: text] [possible values: text, json]
|
|
|
|
|
--public-ips <PUBLIC_IPS> Comma separated list of public ip addresses that will be announced to the nym-api and subsequently to the clients. In nearly all circumstances, it's going to be identical to the address you're going to use for
|
|
|
|
|
bonding [env: NYMNODE_PUBLIC_IPS=]
|
|
|
|
|
--public-ips <PUBLIC_IPS> Comma separated list of public ip addresses that will be announced to the nym-api and subsequently to the clients. In nearly all circumstances, it's
|
|
|
|
|
going to be identical to the address you're going to use for bonding [env: NYMNODE_PUBLIC_IPS=]
|
|
|
|
|
--hostname <HOSTNAME> Optional hostname associated with this gateway that will be announced to the nym-api and subsequently to the clients [env: NYMNODE_HOSTNAME=]
|
|
|
|
|
--location <LOCATION> Optional **physical** location of this node's server. Either full country name (e.g. 'Poland'), two-letter alpha2 (e.g. 'PL'), three-letter alpha3 (e.g. 'POL') or three-digit numeric-3 (e.g. '616') can be
|
|
|
|
|
provided [env: NYMNODE_LOCATION=]
|
|
|
|
|
--location <LOCATION> Optional **physical** location of this node's server. Either full country name (e.g. 'Poland'), two-letter alpha2 (e.g. 'PL'), three-letter alpha3 (e.g.
|
|
|
|
|
'POL') or three-digit numeric-3 (e.g. '616') can be provided [env: NYMNODE_LOCATION=]
|
|
|
|
|
--http-bind-address <HTTP_BIND_ADDRESS> Socket address this node will use for binding its http API. default: `[::]:8080` [env: NYMNODE_HTTP_BIND_ADDRESS=]
|
|
|
|
|
--landing-page-assets-path <LANDING_PAGE_ASSETS_PATH> Path to assets directory of custom landing page of this node [env: NYMNODE_HTTP_LANDING_ASSETS=]
|
|
|
|
|
--http-access-token <HTTP_ACCESS_TOKEN> An optional bearer token for accessing certain http endpoints. Currently only used for prometheus metrics [env: NYMNODE_HTTP_ACCESS_TOKEN=]
|
|
|
|
|
--expose-system-info <EXPOSE_SYSTEM_INFO> Specify whether basic system information should be exposed. default: true [env: NYMNODE_HTTP_EXPOSE_SYSTEM_INFO=] [possible values: true, false]
|
|
|
|
|
--expose-system-hardware <EXPOSE_SYSTEM_HARDWARE> Specify whether basic system hardware information should be exposed. default: true [env: NYMNODE_HTTP_EXPOSE_SYSTEM_HARDWARE=] [possible values: true, false]
|
|
|
|
|
--expose-crypto-hardware <EXPOSE_CRYPTO_HARDWARE> Specify whether detailed system crypto hardware information should be exposed. default: true [env: NYMNODE_HTTP_EXPOSE_CRYPTO_HARDWARE=] [possible values: true, false]
|
|
|
|
|
--expose-system-hardware <EXPOSE_SYSTEM_HARDWARE> Specify whether basic system hardware information should be exposed. default: true [env: NYMNODE_HTTP_EXPOSE_SYSTEM_HARDWARE=] [possible values: true,
|
|
|
|
|
false]
|
|
|
|
|
--expose-crypto-hardware <EXPOSE_CRYPTO_HARDWARE> Specify whether detailed system crypto hardware information should be exposed. default: true [env: NYMNODE_HTTP_EXPOSE_CRYPTO_HARDWARE=] [possible
|
|
|
|
|
values: true, false]
|
|
|
|
|
--mixnet-bind-address <MIXNET_BIND_ADDRESS> Address this node will bind to for listening for mixnet packets default: `[::]:1789` [env: NYMNODE_MIXNET_BIND_ADDRESS=]
|
|
|
|
|
--mixnet-announce-port <MIXNET_ANNOUNCE_PORT> If applicable, custom port announced in the self-described API that other clients and nodes will use. Useful when the node is behind a proxy [env: NYMNODE_MIXNET_ANNOUNCE_PORT=]
|
|
|
|
|
--mixnet-announce-port <MIXNET_ANNOUNCE_PORT> If applicable, custom port announced in the self-described API that other clients and nodes will use. Useful when the node is behind a proxy [env:
|
|
|
|
|
NYMNODE_MIXNET_ANNOUNCE_PORT=]
|
|
|
|
|
--nym-api-urls <NYM_API_URLS> Addresses to nym APIs from which the node gets the view of the network [env: NYMNODE_NYM_APIS=]
|
|
|
|
|
--nyxd-urls <NYXD_URLS> Addresses to nyxd chain endpoint which the node will use for chain interactions [env: NYMNODE_NYXD=]
|
|
|
|
|
--enable-console-logging <ENABLE_CONSOLE_LOGGING> Specify whether running statistics of this node should be logged to the console [env: NYMNODE_ENABLE_CONSOLE_LOGGING=] [possible values: true, false]
|
|
|
|
|
--wireguard-enabled <WIREGUARD_ENABLED> Specifies whether the wireguard service is enabled on this node [env: NYMNODE_WG_ENABLED=] [possible values: true, false]
|
|
|
|
|
--wireguard-bind-address <WIREGUARD_BIND_ADDRESS> Socket address this node will use for binding its wireguard interface. default: `[::]:51822` [env: NYMNODE_WG_BIND_ADDRESS=]
|
|
|
|
|
--wireguard-tunnel-announced-port <WIREGUARD_TUNNEL_ANNOUNCED_PORT> Tunnel port announced to external clients wishing to connect to the wireguard interface. Useful in the instances where the node is behind a proxy [env: NYMNODE_WG_ANNOUNCED_PORT=]
|
|
|
|
|
--wireguard-private-network-prefix <WIREGUARD_PRIVATE_NETWORK_PREFIX> The prefix denoting the maximum number of the clients that can be connected via Wireguard. The maximum value for IPv4 is 32 and for IPv6 is 128 [env: NYMNODE_WG_PRIVATE_NETWORK_PREFIX=]
|
|
|
|
|
--wireguard-userspace <WIREGUARD_USERSPACE> Use userspace implementation of WireGuard (wireguard-go) instead of kernel module. Useful in containerized environments without kernel WireGuard support [env: NYMNODE_WG_USERSPACE=] [possible values: true,
|
|
|
|
|
false]
|
|
|
|
|
--wireguard-tunnel-announced-port <WIREGUARD_TUNNEL_ANNOUNCED_PORT> Tunnel port announced to external clients wishing to connect to the wireguard interface. Useful in the instances where the node is behind a proxy [env:
|
|
|
|
|
NYMNODE_WG_ANNOUNCED_PORT=]
|
|
|
|
|
--wireguard-private-network-prefix <WIREGUARD_PRIVATE_NETWORK_PREFIX> The prefix denoting the maximum number of the clients that can be connected via Wireguard. The maximum value for IPv4 is 32 and for IPv6 is 128 [env:
|
|
|
|
|
NYMNODE_WG_PRIVATE_NETWORK_PREFIX=]
|
|
|
|
|
--wireguard-userspace <WIREGUARD_USERSPACE> Use userspace implementation of WireGuard (wireguard-go) instead of kernel module. Useful in containerized environments without kernel WireGuard support
|
|
|
|
|
[env: NYMNODE_WG_USERSPACE=] [possible values: true, false]
|
|
|
|
|
--verloc-bind-address <VERLOC_BIND_ADDRESS> Socket address this node will use for binding its verloc API. default: `[::]:1790` [env: NYMNODE_VERLOC_BIND_ADDRESS=]
|
|
|
|
|
--verloc-announce-port <VERLOC_ANNOUNCE_PORT> If applicable, custom port announced in the self-described API that other clients and nodes will use. Useful when the node is behind a proxy [env: NYMNODE_VERLOC_ANNOUNCE_PORT=]
|
|
|
|
|
--verloc-announce-port <VERLOC_ANNOUNCE_PORT> If applicable, custom port announced in the self-described API that other clients and nodes will use. Useful when the node is behind a proxy [env:
|
|
|
|
|
NYMNODE_VERLOC_ANNOUNCE_PORT=]
|
|
|
|
|
--entry-bind-address <ENTRY_BIND_ADDRESS> Socket address this node will use for binding its client websocket API. default: `[::]:9000` [env: NYMNODE_ENTRY_BIND_ADDRESS=]
|
|
|
|
|
--announce-ws-port <ANNOUNCE_WS_PORT> Custom announced port for listening for websocket client traffic. If unspecified, the value from the `bind_address` will be used instead [env: NYMNODE_ENTRY_ANNOUNCE_WS_PORT=]
|
|
|
|
|
--announce-ws-port <ANNOUNCE_WS_PORT> Custom announced port for listening for websocket client traffic. If unspecified, the value from the `bind_address` will be used instead [env:
|
|
|
|
|
NYMNODE_ENTRY_ANNOUNCE_WS_PORT=]
|
|
|
|
|
--announce-wss-port <ANNOUNCE_WSS_PORT> If applicable, announced port for listening for secure websocket client traffic [env: NYMNODE_ENTRY_ANNOUNCE_WSS_PORT=]
|
|
|
|
|
--enforce-zk-nyms <ENFORCE_ZK_NYMS> Indicates whether this gateway is accepting only coconut credentials for accessing the mixnet or if it also accepts non-paying clients [env: NYMNODE_ENFORCE_ZK_NYMS=] [possible values: true, false]
|
|
|
|
|
--enforce-zk-nyms <ENFORCE_ZK_NYMS> Indicates whether this gateway is accepting only coconut credentials for accessing the mixnet or if it also accepts non-paying clients [env:
|
|
|
|
|
NYMNODE_ENFORCE_ZK_NYMS=] [possible values: true, false]
|
|
|
|
|
--mnemonic <MNEMONIC> Custom cosmos wallet mnemonic used for zk-nym redemption. If no value is provided, a fresh mnemonic is going to be generated [env: NYMNODE_MNEMONIC=]
|
|
|
|
|
--upgrade-mode-attestation-url <UPGRADE_MODE_ATTESTATION_URL> Endpoint to query to retrieve current upgrade mode attestation. This argument should never be set outside testnets and local networks [env: NYMNODE_UPGRADE_MODE_ATTESTATION_URL=]
|
|
|
|
|
--upgrade-mode-attester-public-key <UPGRADE_MODE_ATTESTER_PUBLIC_KEY> Expected public key of the entity signing the published attestation. This argument should never be set outside testnets and local networks [env: NYMNODE_UPGRADE_MODE_ATTESTER_PUBKEY=]
|
|
|
|
|
--upgrade-mode-attestation-url <UPGRADE_MODE_ATTESTATION_URL> Endpoint to query to retrieve current upgrade mode attestation. This argument should never be set outside testnets and local networks [env:
|
|
|
|
|
NYMNODE_UPGRADE_MODE_ATTESTATION_URL=]
|
|
|
|
|
--upgrade-mode-attester-public-key <UPGRADE_MODE_ATTESTER_PUBLIC_KEY> Expected public key of the entity signing the published attestation. This argument should never be set outside testnets and local networks [env:
|
|
|
|
|
NYMNODE_UPGRADE_MODE_ATTESTER_PUBKEY=]
|
|
|
|
|
--upstream-exit-policy-url <UPSTREAM_EXIT_POLICY_URL> Specifies the url for an upstream source of the exit policy used by this node [env: NYMNODE_UPSTREAM_EXIT_POLICY=]
|
|
|
|
|
--open-proxy <OPEN_PROXY> Specifies whether this exit node should run in 'open-proxy' mode and thus would attempt to resolve **ANY** request it receives [env: NYMNODE_OPEN_PROXY=] [possible values: true, false]
|
|
|
|
|
--open-proxy <OPEN_PROXY> Specifies whether this exit node should run in 'open-proxy' mode and thus would attempt to resolve **ANY** request it receives [env: NYMNODE_OPEN_PROXY=]
|
|
|
|
|
[possible values: true, false]
|
|
|
|
|
--lp-control-bind-address <LP_CONTROL_BIND_ADDRESS> Bind address for the TCP LP control traffic. default: `[::]:41264` [env: NYMNODE_LP_CONTROL_BIND_ADDRESS=]
|
|
|
|
|
--lp-control-announce-port <LP_CONTROL_ANNOUNCE_PORT> Custom announced port for listening for the TCP LP control traffic. If unspecified, the value from the `lp_control_bind_address` will be used instead [env: NYMNODE_LP_CONTROL_ANNOUNCE_PORT=]
|
|
|
|
|
--lp-control-announce-port <LP_CONTROL_ANNOUNCE_PORT> Custom announced port for listening for the TCP LP control traffic. If unspecified, the value from the `lp_control_bind_address` will be used instead
|
|
|
|
|
[env: NYMNODE_LP_CONTROL_ANNOUNCE_PORT=]
|
|
|
|
|
--lp-data-bind-address <LP_DATA_BIND_ADDRESS> Bind address for the UDP LP data traffic. default: `[::]:51264` [env: NYMNODE_LP_DATA_BIND_ADDRESS=]
|
|
|
|
|
--lp-data-announce-port <LP_DATA_ANNOUNCE_PORT> Custom announced port for listening for the UDP LP data traffic. If unspecified, the value from the `lp_data_bind_address` will be used instead [env: NYMNODE_LP_DATA_ANNOUNCE_PORT=]
|
|
|
|
|
--lp-use-mock-ecash <LP_USE_MOCK_ECASH> Use mock ecash manager for LP testing. WARNING: Only use this for local testing! Never enable in production. When enabled, the LP listener will accept any credential without blockchain verification [env:
|
|
|
|
|
NYMNODE_LP_USE_MOCK_ECASH=] [possible values: true, false]
|
|
|
|
|
--lp-data-announce-port <LP_DATA_ANNOUNCE_PORT> Custom announced port for listening for the UDP LP data traffic. If unspecified, the value from the `lp_data_bind_address` will be used instead [env:
|
|
|
|
|
NYMNODE_LP_DATA_ANNOUNCE_PORT=]
|
|
|
|
|
--lp-use-mock-ecash <LP_USE_MOCK_ECASH> Use mock ecash manager for LP testing. WARNING: Only use this for local testing! Never enable in production. When enabled, the LP listener will accept
|
|
|
|
|
any credential without blockchain verification [env: NYMNODE_LP_USE_MOCK_ECASH=] [possible values: true, false]
|
|
|
|
|
-h, --help Print help
|
|
|
|
|
```
|
|
|
|
|
mfahampshire