nym/common/client-core/src/config/mod.rs

// Copyright 2021-2023 - Nym Technologies SA <contact@nymtech.net>
// SPDX-License-Identifier: Apache-2.0

use crate::{client::topology_control::geo_aware_provider::CountryGroup, error::ClientCoreError};
use nym_config::defaults::NymNetworkDetails;
use nym_crypto::asymmetric::identity;
use nym_gateway_client::client::GatewayConfig;
use nym_sphinx::{
    addressing::clients::Recipient,
    params::{PacketSize, PacketType},
};
use serde::{Deserialize, Serialize};
use std::time::Duration;
use url::Url;

#[cfg(target_arch = "wasm32")]
use wasm_bindgen::prelude::*;

pub mod disk_persistence;
pub mod old_config_v1_1_13;
pub mod old_config_v1_1_20;
pub mod old_config_v1_1_20_2;
pub mod old_config_v1_1_30;

// 'DEBUG'
const DEFAULT_ACK_WAIT_MULTIPLIER: f64 = 1.5;

const DEFAULT_ACK_WAIT_ADDITION: Duration = Duration::from_millis(1_500);
const DEFAULT_LOOP_COVER_STREAM_AVERAGE_DELAY: Duration = Duration::from_millis(200);
const DEFAULT_MESSAGE_STREAM_AVERAGE_DELAY: Duration = Duration::from_millis(20);
const DEFAULT_AVERAGE_PACKET_DELAY: Duration = Duration::from_millis(50);
const DEFAULT_TOPOLOGY_REFRESH_RATE: Duration = Duration::from_secs(5 * 60); // every 5min
const DEFAULT_TOPOLOGY_RESOLUTION_TIMEOUT: Duration = Duration::from_millis(5_000);
const DEFAULT_MAX_STARTUP_GATEWAY_WAITING_PERIOD: Duration = Duration::from_secs(70 * 60); // 70min -> full epoch (1h) + a bit of overhead

// Set this to a high value for now, so that we don't risk sporadic timeouts that might cause
// bought bandwidth tokens to not have time to be spent; Once we remove the gateway from the
// bandwidth bridging protocol, we can come back to a smaller timeout value
const DEFAULT_GATEWAY_RESPONSE_TIMEOUT: Duration = Duration::from_secs(5 * 60);

const DEFAULT_COVER_TRAFFIC_PRIMARY_SIZE_RATIO: f64 = 0.70;

// reply-surbs related:

// define when to request
// clients/client-core/src/client/replies/reply_storage/surb_storage.rs
const DEFAULT_MINIMUM_REPLY_SURB_STORAGE_THRESHOLD: usize = 10;
const DEFAULT_MAXIMUM_REPLY_SURB_STORAGE_THRESHOLD: usize = 200;

// define how much to request at once
// clients/client-core/src/client/replies/reply_controller.rs
const DEFAULT_MINIMUM_REPLY_SURB_REQUEST_SIZE: u32 = 10;
const DEFAULT_MAXIMUM_REPLY_SURB_REQUEST_SIZE: u32 = 100;

const DEFAULT_MAXIMUM_ALLOWED_SURB_REQUEST_SIZE: u32 = 500;

const DEFAULT_MAXIMUM_REPLY_SURB_REREQUEST_WAITING_PERIOD: Duration = Duration::from_secs(10);
const DEFAULT_MAXIMUM_REPLY_SURB_DROP_WAITING_PERIOD: Duration = Duration::from_secs(5 * 60);

// 12 hours
const DEFAULT_MAXIMUM_REPLY_SURB_AGE: Duration = Duration::from_secs(12 * 60 * 60);

// 24 hours
const DEFAULT_MAXIMUM_REPLY_KEY_AGE: Duration = Duration::from_secs(24 * 60 * 60);

#[derive(Debug, Clone, Deserialize, PartialEq, Serialize)]
#[serde(deny_unknown_fields)]
pub struct Config {
    pub client: Client,

    #[serde(default)]
    pub debug: DebugConfig,
}

impl Config {
    pub fn new<S1, S2>(id: S1, version: S2) -> Self
    where
        S1: Into<String>,
        S2: Into<String>,
    {
        Config {
            client: Client::new_default(id, version),
            debug: Default::default(),
        }
    }

    pub fn from_client_config(client: Client, debug: DebugConfig) -> Self {
        Config { client, debug }
    }

    pub fn validate(&self) -> bool {
        self.debug.validate()
    }

    pub fn with_debug_config(mut self, debug: DebugConfig) -> Self {
        self.debug = debug;
        self
    }

    pub fn with_disabled_credentials(mut self, disabled_credentials_mode: bool) -> Self {
        self.client.disabled_credentials_mode = disabled_credentials_mode;
        self
    }

    pub fn with_custom_nyxd(mut self, urls: Vec<Url>) -> Self {
        self.client.nyxd_urls = urls;
        self
    }

    pub fn set_custom_nyxd(&mut self, nyxd_urls: Vec<Url>) {
        self.client.nyxd_urls = nyxd_urls;
    }

    pub fn with_custom_nym_apis(mut self, nym_api_urls: Vec<Url>) -> Self {
        self.client.nym_api_urls = nym_api_urls;
        self
    }

    pub fn set_custom_nym_apis(&mut self, nym_api_urls: Vec<Url>) {
        self.client.nym_api_urls = nym_api_urls;
    }

    pub fn with_high_default_traffic_volume(mut self, enabled: bool) -> Self {
        if enabled {
            self.set_high_default_traffic_volume();
        }
        self
    }

    pub fn with_packet_type(mut self, packet_type: PacketType) -> Self {
        self.debug.traffic.packet_type = packet_type;
        self
    }

    pub fn set_high_default_traffic_volume(&mut self) {
        self.debug.traffic.average_packet_delay = Duration::from_millis(10);
        // basically don't really send cover messages
        self.debug.cover_traffic.loop_cover_traffic_average_delay =
            Duration::from_millis(2_000_000);
        // 250 "real" messages / s
        self.debug.traffic.message_sending_average_delay = Duration::from_millis(4);
    }

    pub fn with_disabled_poisson_process(mut self, disabled: bool) -> Self {
        if disabled {
            self.set_no_poisson_process()
        }
        self
    }

    pub fn set_no_poisson_process(&mut self) {
        self.debug.traffic.disable_main_poisson_packet_distribution = true;
    }

    pub fn with_disabled_cover_traffic(mut self, disabled: bool) -> Self {
        if disabled {
            self.set_no_cover_traffic()
        }
        self
    }

    pub fn set_no_cover_traffic(&mut self) {
        self.debug.cover_traffic.disable_loop_cover_traffic_stream = true;
        self.debug.traffic.disable_main_poisson_packet_distribution = true;
    }

    pub fn with_disabled_cover_traffic_with_keepalive(mut self, disabled: bool) -> Self {
        if disabled {
            self.set_no_cover_traffic_with_keepalive()
        }
        self
    }
    pub fn set_no_cover_traffic_with_keepalive(&mut self) {
        self.debug.traffic.disable_main_poisson_packet_distribution = true;
        self.debug.cover_traffic.loop_cover_traffic_average_delay = Duration::from_secs(5);
    }

    pub fn with_disabled_topology_refresh(mut self, disable_topology_refresh: bool) -> Self {
        self.debug.topology.disable_refreshing = disable_topology_refresh;
        self
    }

    pub fn with_topology_structure(mut self, topology_structure: TopologyStructure) -> Self {
        self.set_topology_structure(topology_structure);
        self
    }

    pub fn set_topology_structure(&mut self, topology_structure: TopologyStructure) {
        self.debug.topology.topology_structure = topology_structure;
    }

    pub fn with_no_per_hop_delays(mut self, no_per_hop_delays: bool) -> Self {
        if no_per_hop_delays {
            self.set_no_per_hop_delays()
        }
        self
    }

    pub fn set_no_per_hop_delays(&mut self) {
        self.debug.traffic.average_packet_delay = Duration::ZERO;
        self.debug.acknowledgements.average_ack_delay = Duration::ZERO;
    }

    pub fn with_secondary_packet_size(mut self, secondary_packet_size: Option<PacketSize>) -> Self {
        self.set_secondary_packet_size(secondary_packet_size);
        self
    }

    pub fn set_secondary_packet_size(&mut self, secondary_packet_size: Option<PacketSize>) {
        self.debug.traffic.secondary_packet_size = secondary_packet_size;
    }

    pub fn set_custom_version(&mut self, version: &str) {
        self.client.version = version.to_string();
    }

    pub fn get_id(&self) -> String {
        self.client.id.clone()
    }

    pub fn get_disabled_credentials_mode(&self) -> bool {
        self.client.disabled_credentials_mode
    }

    pub fn get_validator_endpoints(&self) -> Vec<Url> {
        self.client.nyxd_urls.clone()
    }

    pub fn get_nym_api_endpoints(&self) -> Vec<Url> {
        self.client.nym_api_urls.clone()
    }
}

#[derive(Clone, Debug, Default, Deserialize, PartialEq, Eq, Serialize)]
#[cfg_attr(target_arch = "wasm32", wasm_bindgen(getter_with_clone))]
pub struct GatewayEndpointConfig {
    /// gateway_id specifies ID of the gateway to which the client should send messages.
    /// If initially omitted, a random gateway will be chosen from the available topology.
    pub gateway_id: String,

    /// Address of the gateway owner to which the client should send messages.
    pub gateway_owner: String,

    /// Address of the gateway listener to which all client requests should be sent.
    pub gateway_listener: String,
}

impl TryFrom<GatewayEndpointConfig> for GatewayConfig {
    type Error = ClientCoreError;

    fn try_from(value: GatewayEndpointConfig) -> Result<Self, Self::Error> {
        Ok(GatewayConfig {
            gateway_identity: identity::PublicKey::from_base58_string(value.gateway_id)
                .map_err(ClientCoreError::UnableToCreatePublicKeyFromGatewayId)?,
            gateway_owner: Some(value.gateway_owner),
            gateway_listener: value.gateway_listener,
        })
    }
}

#[cfg_attr(target_arch = "wasm32", wasm_bindgen)]
impl GatewayEndpointConfig {
    #[cfg_attr(target_arch = "wasm32", wasm_bindgen(constructor))]
    pub fn new(
        gateway_id: String,
        gateway_owner: String,
        gateway_listener: String,
    ) -> GatewayEndpointConfig {
        GatewayEndpointConfig {
            gateway_id,
            gateway_owner,
            gateway_listener,
        }
    }
}

// separate block so it wouldn't be exported via wasm bindgen
impl GatewayEndpointConfig {
    pub fn try_get_gateway_identity_key(&self) -> Result<identity::PublicKey, ClientCoreError> {
        identity::PublicKey::from_base58_string(&self.gateway_id)
            .map_err(ClientCoreError::UnableToCreatePublicKeyFromGatewayId)
    }

    pub fn from_node(
        node: nym_topology::gateway::Node,
        must_use_tls: bool,
    ) -> Result<Self, ClientCoreError> {
        let gateway_listener = if must_use_tls {
            node.clients_address_tls()
                .ok_or(ClientCoreError::UnsupportedWssProtocol {
                    gateway: node.identity_key.to_base58_string(),
                })?
        } else {
            node.clients_address()
        };

        Ok(GatewayEndpointConfig {
            gateway_id: node.identity_key.to_base58_string(),
            gateway_listener,
            gateway_owner: node.owner,
        })
    }
}

#[derive(Debug, Clone, Deserialize, PartialEq, Eq, Serialize)]
// note: the deny_unknown_fields is VITAL here to allow upgrades from v1.1.20_2
#[serde(deny_unknown_fields)]
pub struct Client {
    /// Version of the client for which this configuration was created.
    pub version: String,

    /// ID specifies the human readable ID of this particular client.
    pub id: String,

    /// Indicates whether this client is running in a disabled credentials mode, thus attempting
    /// to claim bandwidth without presenting bandwidth credentials.
    // TODO: this should be moved to `debug.gateway_connection`
    #[serde(default)]
    pub disabled_credentials_mode: bool,

    /// Addresses to nyxd validators via which the client can communicate with the chain.
    #[serde(alias = "validator_urls")]
    pub nyxd_urls: Vec<Url>,

    /// Addresses to APIs running on validator from which the client gets the view of the network.
    #[serde(alias = "validator_api_urls")]
    pub nym_api_urls: Vec<Url>,
}

impl Client {
    pub fn new_default<S1, S2>(id: S1, version: S2) -> Self
    where
        S1: Into<String>,
        S2: Into<String>,
    {
        let network = NymNetworkDetails::new_mainnet();
        let nyxd_urls = network
            .endpoints
            .iter()
            .map(|validator| validator.nyxd_url())
            .collect();
        let nym_api_urls = network
            .endpoints
            .iter()
            .filter_map(|validator| validator.api_url())
            .collect::<Vec<_>>();

        Client {
            version: version.into(),
            id: id.into(),
            disabled_credentials_mode: true,
            nyxd_urls,
            nym_api_urls,
        }
    }

    pub fn new<S: Into<String>>(
        id: S,
        disabled_credentials_mode: bool,
        nyxd_urls: Vec<Url>,
        nym_api_urls: Vec<Url>,
    ) -> Self {
        Client {
            version: env!("CARGO_PKG_VERSION").to_string(),
            id: id.into(),
            disabled_credentials_mode,
            nyxd_urls,
            nym_api_urls,
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct Traffic {
    /// The parameter of Poisson distribution determining how long, on average,
    /// sent packet is going to be delayed at any given mix node.
    /// So for a packet going through three mix nodes, on average, it will take three times this value
    /// until the packet reaches its destination.
    #[serde(with = "humantime_serde")]
    pub average_packet_delay: Duration,

    /// The parameter of Poisson distribution determining how long, on average,
    /// it is going to take another 'real traffic stream' message to be sent.
    /// If no real packets are available and cover traffic is enabled,
    /// a loop cover message is sent instead in order to preserve the rate.
    #[serde(with = "humantime_serde")]
    pub message_sending_average_delay: Duration,

    /// Controls whether the main packet stream constantly produces packets according to the predefined
    /// poisson distribution.
    pub disable_main_poisson_packet_distribution: bool,

    /// Specifies the packet size used for sent messages.
    /// Do not override it unless you understand the consequences of that change.
    pub primary_packet_size: PacketSize,

    /// Specifies the optional auxiliary packet size for optimizing message streams.
    /// Note that its use decreases overall anonymity.
    /// Do not set it it unless you understand the consequences of that change.
    pub secondary_packet_size: Option<PacketSize>,

    pub packet_type: PacketType,
}

impl Traffic {
    pub fn validate(&self) -> bool {
        if let Some(secondary_packet_size) = self.secondary_packet_size {
            if secondary_packet_size == PacketSize::AckPacket
                || secondary_packet_size == self.primary_packet_size
            {
                return false;
            }
        }
        true
    }
}

impl Default for Traffic {
    fn default() -> Self {
        Traffic {
            average_packet_delay: DEFAULT_AVERAGE_PACKET_DELAY,
            message_sending_average_delay: DEFAULT_MESSAGE_STREAM_AVERAGE_DELAY,
            disable_main_poisson_packet_distribution: false,
            primary_packet_size: PacketSize::RegularPacket,
            secondary_packet_size: None,
            packet_type: PacketType::Mix,
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct CoverTraffic {
    /// The parameter of Poisson distribution determining how long, on average,
    /// it is going to take for another loop cover traffic message to be sent.
    #[serde(with = "humantime_serde")]
    pub loop_cover_traffic_average_delay: Duration,

    /// Specifies the ratio of `primary_packet_size` to `secondary_packet_size` used in cover traffic.
    /// Only applicable if `secondary_packet_size` is enabled.
    pub cover_traffic_primary_size_ratio: f64,

    /// Controls whether the dedicated loop cover traffic stream should be enabled.
    /// (and sending packets, on average, every [Self::loop_cover_traffic_average_delay])
    pub disable_loop_cover_traffic_stream: bool,
}

impl Default for CoverTraffic {
    fn default() -> Self {
        CoverTraffic {
            loop_cover_traffic_average_delay: DEFAULT_LOOP_COVER_STREAM_AVERAGE_DELAY,
            cover_traffic_primary_size_ratio: DEFAULT_COVER_TRAFFIC_PRIMARY_SIZE_RATIO,
            disable_loop_cover_traffic_stream: false,
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct GatewayConnection {
    /// How long we're willing to wait for a response to a message sent to the gateway,
    /// before giving up on it.
    #[serde(with = "humantime_serde")]
    pub gateway_response_timeout: Duration,
}

impl Default for GatewayConnection {
    fn default() -> Self {
        GatewayConnection {
            gateway_response_timeout: DEFAULT_GATEWAY_RESPONSE_TIMEOUT,
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct Acknowledgements {
    /// The parameter of Poisson distribution determining how long, on average,
    /// sent acknowledgement is going to be delayed at any given mix node.
    /// So for an ack going through three mix nodes, on average, it will take three times this value
    /// until the packet reaches its destination.
    #[serde(with = "humantime_serde")]
    pub average_ack_delay: Duration,

    /// Value multiplied with the expected round trip time of an acknowledgement packet before
    /// it is assumed it was lost and retransmission of the data packet happens.
    /// In an ideal network with 0 latency, this value would have been 1.
    pub ack_wait_multiplier: f64,

    /// Value added to the expected round trip time of an acknowledgement packet before
    /// it is assumed it was lost and retransmission of the data packet happens.
    /// In an ideal network with 0 latency, this value would have been 0.
    #[serde(with = "humantime_serde")]
    pub ack_wait_addition: Duration,
}

impl Default for Acknowledgements {
    fn default() -> Self {
        Acknowledgements {
            average_ack_delay: DEFAULT_AVERAGE_PACKET_DELAY,
            ack_wait_multiplier: DEFAULT_ACK_WAIT_MULTIPLIER,
            ack_wait_addition: DEFAULT_ACK_WAIT_ADDITION,
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct Topology {
    /// The uniform delay every which clients are querying the directory server
    /// to try to obtain a compatible network topology to send sphinx packets through.
    #[serde(with = "humantime_serde")]
    pub topology_refresh_rate: Duration,

    /// During topology refresh, test packets are sent through every single possible network
    /// path. This timeout determines waiting period until it is decided that the packet
    /// did not reach its destination.
    #[serde(with = "humantime_serde")]
    pub topology_resolution_timeout: Duration,

    /// Specifies whether the client should not refresh the network topology after obtaining
    /// the first valid instance.
    /// Supersedes `topology_refresh_rate_ms`.
    pub disable_refreshing: bool,

    /// Defines how long the client is going to wait on startup for its gateway to come online,
    /// before abandoning the procedure.
    #[serde(with = "humantime_serde")]
    pub max_startup_gateway_waiting_period: Duration,

    /// Specifies the mixnode topology to be used for sending packets.
    pub topology_structure: TopologyStructure,
}

#[allow(clippy::large_enum_variant)]
#[derive(Default, Copy, Clone, Debug, PartialEq, Serialize, Deserialize)]
pub enum TopologyStructure {
    #[default]
    NymApi,
    GeoAware(GroupBy),
}

#[allow(clippy::large_enum_variant)]
#[derive(Copy, Clone, Debug, PartialEq, Serialize, Deserialize)]
pub enum GroupBy {
    CountryGroup(CountryGroup),
    NymAddress(Recipient),
}

impl std::fmt::Display for GroupBy {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            GroupBy::CountryGroup(group) => write!(f, "group: {}", group),
            GroupBy::NymAddress(address) => write!(f, "address: {}", address),
        }
    }
}

impl Default for Topology {
    fn default() -> Self {
        Topology {
            topology_refresh_rate: DEFAULT_TOPOLOGY_REFRESH_RATE,
            topology_resolution_timeout: DEFAULT_TOPOLOGY_RESOLUTION_TIMEOUT,
            disable_refreshing: false,
            max_startup_gateway_waiting_period: DEFAULT_MAX_STARTUP_GATEWAY_WAITING_PERIOD,
            topology_structure: TopologyStructure::default(),
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct ReplySurbs {
    /// Defines the minimum number of reply surbs the client wants to keep in its storage at all times.
    /// It can only allow to go below that value if its to request additional reply surbs.
    pub minimum_reply_surb_storage_threshold: usize,

    /// Defines the maximum number of reply surbs the client wants to keep in its storage at any times.
    pub maximum_reply_surb_storage_threshold: usize,

    /// Defines the minimum number of reply surbs the client would request.
    pub minimum_reply_surb_request_size: u32,

    /// Defines the maximum number of reply surbs the client would request.
    pub maximum_reply_surb_request_size: u32,

    /// Defines the maximum number of reply surbs a remote party is allowed to request from this client at once.
    pub maximum_allowed_reply_surb_request_size: u32,

    /// Defines maximum amount of time the client is going to wait for reply surbs before explicitly asking
    /// for more even though in theory they wouldn't need to.
    #[serde(with = "humantime_serde")]
    pub maximum_reply_surb_rerequest_waiting_period: Duration,

    /// Defines maximum amount of time the client is going to wait for reply surbs before
    /// deciding it's never going to get them and would drop all pending messages
    #[serde(with = "humantime_serde")]
    pub maximum_reply_surb_drop_waiting_period: Duration,

    /// Defines maximum amount of time given reply surb is going to be valid for.
    /// This is going to be superseded by key rotation once implemented.
    #[serde(with = "humantime_serde")]
    pub maximum_reply_surb_age: Duration,

    /// Defines maximum amount of time given reply key is going to be valid for.
    /// This is going to be superseded by key rotation once implemented.
    #[serde(with = "humantime_serde")]
    pub maximum_reply_key_age: Duration,

    /// Specifies the number of mixnet hops the packet should go through. If not specified, then
    /// the default value is used.
    pub surb_mix_hops: Option<u8>,
}

impl Default for ReplySurbs {
    fn default() -> Self {
        ReplySurbs {
            minimum_reply_surb_storage_threshold: DEFAULT_MINIMUM_REPLY_SURB_STORAGE_THRESHOLD,
            maximum_reply_surb_storage_threshold: DEFAULT_MAXIMUM_REPLY_SURB_STORAGE_THRESHOLD,
            minimum_reply_surb_request_size: DEFAULT_MINIMUM_REPLY_SURB_REQUEST_SIZE,
            maximum_reply_surb_request_size: DEFAULT_MAXIMUM_REPLY_SURB_REQUEST_SIZE,
            maximum_allowed_reply_surb_request_size: DEFAULT_MAXIMUM_ALLOWED_SURB_REQUEST_SIZE,
            maximum_reply_surb_rerequest_waiting_period:
                DEFAULT_MAXIMUM_REPLY_SURB_REREQUEST_WAITING_PERIOD,
            maximum_reply_surb_drop_waiting_period: DEFAULT_MAXIMUM_REPLY_SURB_DROP_WAITING_PERIOD,
            maximum_reply_surb_age: DEFAULT_MAXIMUM_REPLY_SURB_AGE,
            maximum_reply_key_age: DEFAULT_MAXIMUM_REPLY_KEY_AGE,
            surb_mix_hops: None,
        }
    }
}

#[derive(Debug, Clone, Copy, Deserialize, PartialEq, Serialize)]
#[serde(default, deny_unknown_fields)]
pub struct DebugConfig {
    /// Defines all configuration options related to traffic streams.
    pub traffic: Traffic,

    /// Defines all configuration options related to cover traffic stream(s).
    pub cover_traffic: CoverTraffic,

    /// Defines all configuration options related to the gateway connection.
    pub gateway_connection: GatewayConnection,

    /// Defines all configuration options related to acknowledgements, such as delays or wait timeouts.
    pub acknowledgements: Acknowledgements,

    /// Defines all configuration options related topology, such as refresh rates or timeouts.
    pub topology: Topology,

    /// Defines all configuration options related to reply SURBs.
    pub reply_surbs: ReplySurbs,
}

impl DebugConfig {
    pub fn validate(&self) -> bool {
        // no other sections have explicit requirements (yet)
        self.traffic.validate()
    }
}

// it could be derived, sure, but I'd rather have an explicit implementation in case we had to change
// something manually at some point
#[allow(clippy::derivable_impls)]
impl Default for DebugConfig {
    fn default() -> Self {
        DebugConfig {
            traffic: Default::default(),
            cover_traffic: Default::default(),
            gateway_connection: Default::default(),
            acknowledgements: Default::default(),
            topology: Default::default(),
            reply_surbs: Default::default(),
        }
    }
}